This is the chrome-plated spout found on the new Ascaso pid models.
If you have the portafilter shown above, this spout will fit - for stainless steel - see below.
Specifications:
Width: 48mm
Thread: 3/8''
Height: 23mm
Material: Chrome-plated brass
Fits:
ascaso steel pro
ascaso Bar
ascaso Barista
ascaso Barista T
ascaso PID
ascaso Dream
ascaso Big deam
How to fit a coffee spout on a portafilter
Remove existing spout - some are glued and some are factory tightened. 💡 If you cannot remove it easily try immersing it in boiling water - this will either loosen the glue or expand the metal.
Clean existing spout - rub with a cloth to remove existing glue or debris.
Screw on the spout clockwise:
If the spout finishes just short of straight - insert a screwdriver into the spout and tighten clockwise.
If the spout finishes halfway and won't go any further no matter how you try - you will have to use PTFE Sealing Tape or Threadlocker Blue 242 glue...while inconvenient it is necessary.