Wishlist 0 items

Your basket 0 items €0.00

Your basket€0.00

View All Product Reviews Review Your Product

Gaggia Classic Portafilter Component €0.00

Name: Classic Portafilter Component
Brand: Gaggia
SKU: 1522IE
Availability: InStock

E-mail Friend

Product Description

Reviews

See All | See All Gaggia Products

1/1

Order in the next 14 Hours 53 minutes 03 seconds for dispatch tomorrow

Postage to Ireland on this item is €5.50

FAST Shipping to Ireland

Description
Reviews
Q&A (642)

Gaggia portafilter - No basket and no spout

Add to gaggia pressure kit
Add to single or double portafilter
Add to double pressure portafilter

Be the first to review this product

Write A Review

John from Ireland asks

Why use a Dynamometric Pressurised Tamper?

Blue Star Coffee Replies:

Since the same pressure is applied, this will remove the inconsistencies associated with numerous members of staff applying varying rates of pressure to ground coffee. The tamper can be adjusted by turning the handle clockwise or anticlockwise to decrease/increase the pressure. Turning the handle clockwise will tighten the spring and reduce the pressure required.

Gerry from United States asks

Can I use a VST basket with this?

Blue Star Coffee Replies:

Yes - this accepts IMS, E&B, Barista Pro and VST baskets - ridged and unridged.

Bruce from United States asks

Will this fit my 110V gaggia classic ?

Blue Star Coffee Replies:

Yes - This fits both 230V and 110V models.

Andrea from Italy asks

Good evening, my coffee machine is a 2011 Ascaso Basic. I wanted to know if this piece was compatible or where to find the compatible piece. Thanks

Blue Star Coffee Replies:

If your machine has stopped pulsing water through the Thermoblock than you may want to change this part. It fits models with the new thermoblock or if made after +09/2012.

Mario from Luxembourg asks

Hi, Does it fit on the Lelit PL162T v3 coffee machine? Grazie,

Blue Star Coffee Replies:

This will fit on the Lelit Bianca PL162T, It is an E61 shower so fits any E61 group.

Tom Darcy from Ireland asks

Hi, Can you use these with portafilters ?

Blue Star Coffee Replies:

Yes, You can use these papers with 57/58mm portafilters - like a puck screen. It prevents the shower screen getting dirty and helps with channelling.

Solon from Cyprus asks

Hello. Are these the 233M or the 033M burrs Thank you Solon

Blue Star Coffee Replies:

Hi, These are new for 2023 and are now 233M

Josip from Croatia asks

Dear BSC support, on IMS it says that this shower is 51,9mm in diameter, while in your description it is 51,5mm. I have old Bezzera Hobby (51,9mm shower) and would like to upgrade it with this shower. Also, CI200IM is something I am considering, but it is also 51,5mm. Will it work on my machine? Best regards, Josip

Blue Star Coffee Replies:

Hi, We measured the CI35WM and it is 51.7mm wide - so should be fine - the standard size is 51.5mm for these shower screens. The CI200Im is 51.3mm so 4mm less and would not be a good replacement.

Pascal from Switzerland asks

hi guys I'm interested to buy the pavoni pressure kit. you mentioned in the description, that it doesn't matter you have a pre- or post-millennium machine? does the piston have the same diameter? i have a post-millennium (2003) machine and the brew group here seems a little wider than on the old ones? thanks pascal

Blue Star Coffee Replies:

It fits Post-Millenium Europiccola/Professional – 3rd gen machines made after year 2000 - so it will fit your model.

Myles Glynn from Ireland asks

Does this fit the older models made before 2000 ?

Blue Star Coffee Replies:

Yes - fits all Pavoni lever models Inc pre & post millennium versions.

A from Ireland asks

Hi, do I have to remove that little rubber inside of the pressure gauge or not? With the rubber in its reading 12+ bar. Without it is reading 8 bar. The pressure has never been adjusted before. Not sure which is correct.

Blue Star Coffee Replies:

Hi, The gauge kit, comes with a rubber gasket and a metal gauze filter. The gasket is just to make a seal so its wont leak and the metal filter prevents debris getting into the gauge. Most Gaggia machines were set at 12 bar - so your model is probably 12/14 bars. If you are reading 8 bars with the gasket - then the gasket is probably not fitting correctly and is partially blocking the gauge.

Max from Netherlands asks

Hallo, What is the size of the elbow fitting on the tape assembley? And what is the diameter of the teflon pipe? Thank you in advance.

Blue Star Coffee Replies:

Hi, The elbow fitting is 1/8'x1/8' and the PTFE pipe is 4mmx6mm - search i.44 and PTFE pipe for more information.

Phillip Smith from Canada asks

Will a 57.4mm tamper fit this ?

Blue Star Coffee Replies:

Our precision tamper is 57.4mm and is too wide for this 57.3mm basket. The ascaso 57mm is a good fit, as is our 57mm tamper

Alex from United Kingdom asks

Hi, will it fit 57mm Ascaso competition basket AND under integrated Lelit Anita grinder?

Blue Star Coffee Replies:

Hi, Yes, It fits all 57mm baskets Inc the ascaso competition basket. I don't know if it fits under the integrated grinder - probably not.

Muhammad Asyraf from Malaysia asks

Is this valve adjustable for pressure?

Blue Star Coffee Replies:

No, S2 priming valves prevent airlocks in the pump and pressurized water from the boiler from going back into the water reservoir draining the boiler. Search on our site for "OPV kit" or "OPV" to see over-pressure valves.

Blær from Iceland asks

Hello! Wonderful upgrade, but I don't have a pressure gauge, so I'm having some trouble finding 9.5 bars. I was wondering how low does the pressure go and how high, so I can "aim" the screw? :) Thanks in advance!

Blue Star Coffee Replies:

Hi Blaer, I understand that it is adjustable to 9-10 bars. Fitting the OPV reduces pump pressure from 16 bar to 10 bars.

Peyton Miller from United States asks

Hello! I was wondering if this would fit a Bezerra BZ99? and if not do you sell a shower screen that will fit it? thanks in advance.

Blue Star Coffee Replies:

Hi Peyton, No this one won't fit you would need the deeper shower screen. Search Bezzera Shower Screen 58mm using our search bar.

Plamen from United States asks

Hi there, wanted to ask what the inside depths of the two portafilters are: Lelit PLA58 Walnut Naked Portafilter and Quickmill Naked Portafilter Walnut E61

Blue Star Coffee Replies:

Hi Plamen, The quick mill is deeper at 28mm - comes with 21g basket and the Lelit is 25.5mm - comes with a 14/16g La marzocco style basket.

Adam from Poland asks

Hi, does this kit will fit into Gaggia Classic Pro?

Blue Star Coffee Replies:

Hi Adam, If your model has the aluminum shower holder then the kit will fit. The new professional models already come with this stainless steel shower holder, so you will only need the shower.

Karen from United Kingdom asks

Hello I have a Eureka Mignon MKII; will this single dose hopper fit that please? Best

Blue Star Coffee Replies:

Hi Karen, It should fit but the dimensions are slightly different: Older Mignon models: (Diameter 41mm x 14mm deep) are 3mm less deep and slightly less wide - should fit, but a tiny bit tight and tall.

Martin from Finland asks

Will this fit the Rancilio Silvia stock double spout portafilter?

Blue Star Coffee Replies:

Hi Martin, Yes, it will. It fits any portafilter with a 3/8" thread - almost all commercial portafilters.

Tim from Australia asks

Do you also sell the Lelit 57mm triple basket (L140041)?

Blue Star Coffee Replies:

Hi Tim, I am afraid not at present - but we have ascaso i.280 - holds 18g and IMS Lelit Double Basket B642Th 14-17g

Dejan from Croatia asks

I want to know the size of the bottom circle? And does it fits ti grinder Expobar Pulse 65 HS? Thanks

Blue Star Coffee Replies:

Hi Dejan, The bottom circle is 42mm wide outside x 17mm in height, (the same as the other Mignon hoppers). Don't know if it fits other models - check the dimensions to be sure.

Kamil from Germany asks

Hi, ist this the "I.4364 ASCASO BUTTON" spare part matching for the ASCASO DREAM PID? I mean the two Buttons left an right of the display. Regards Kamil

Blue Star Coffee Replies:

Hi Kamil, This button will not fit the PID panel - you would need the i.4364 (approx 17.00 each) We can order for you - 3/4 weeks.

Joe Thomson from United Kingdom asks

What is the difference between this thick puck screen and the other thin screen ?

Blue Star Coffee Replies:

Hi Joe, Because this puck screen is dense, it will cool the extraction temperature by 1-2 °C. This suits some machines where you cannot control the group temperature, for easy-to-burn 100% Arabica coffees.

Joseph from Ireland asks

Hi, I've a Profitec Go, it should take any E61 portafilter. I'm looking at your bottomless ones, Rocket ECM Profitec. Are they actually manufactured by these brands or are they generic non branded? They all look to be the same product? Do they have a little chrome dot in the handle, 1 picture they do, 1picture they dont. Last question, the basket that comes with them. Are they ridged or ridgeless? Thanks, Joe

Blue Star Coffee Replies:

Hi Joseph, (a) The portafilter is generic, aftermarket, and not original, however, I don't think that there is any difference between the original. (b) Comes with the chrome end cap as standard. (c) The basket is 18/21g and is ridgeless

Luke from United Kingdom asks

Are these the filters made in the original Japanese factory without tabs?

Blue Star Coffee Replies:

Hi Luke, These are made in Japan and are untabbed.

Julian from Germany asks

Hi, im would like to use the Mazzer 233M in my Fiorenzato F5. Sadly it's listed as non-fitting. Can you explain why this is? And give the exact dimensions of the burrs? Especially the beveled base is unclear to me. Thanks in advance

Blue Star Coffee Replies:

Hi Julian, I don't know if this will fit Fiorenzato F5, even though, they are both the same dimensions 64mm x 37mm x 8.5mm. We don't have 1 in stock to measure - restocking shortly.

Patrick from United Kingdom asks

Hi, will this solenoid fit the Sage Bambino Plus machine? MODEL. SES500BSS

Blue Star Coffee Replies:

Hi, We cannot confirm if this will fit or not. Check if your valve is the 588 type and 2 way, if it is, then yes it would fit the Bambino.

John from United Kingdom asks

Hi there will this fit my la Pavoni professional/a model Hope u can help I have pics too Best wishes john

Blue Star Coffee Replies:

Hi John, This will fit all Pavon lever models made after 2000, including the professional.

Martin from Finland asks

Hi, Does this fit all Silvia models? Br, Martin

Blue Star Coffee Replies:

Hi, Yes it will fit all Silvia models - Older models over 3/5 years, the portafilter may finish at 5 O clock, instead of 6 O clock. In that case, you should use a paper shim to make the gasket thicker.

Yuval from Netherlands asks

Hi there, I'm interested in the 14cm knock drawer in white but I see two identical products with different prices. Can you help me find the difference or direct me to which model is the right one. I would like the walnut wood handle to match my lelit Bianca walnut Version. :) Thank you so much! Yuval

Blue Star Coffee Replies:

Hi Yuval, This 14cm drawer is made in White, Black, or steel and comes with a walnut wood handle. The walnut color can vary but should look very close to what is in the image.

Mehmed from United Kingdom asks

HI what is the size of the top circle of the hopper?

Blue Star Coffee Replies:

Hi Mehmed, the funnel is 14cm in height and the lid is 17cm wide, tallet and wider than the stock funnel.

luigi from United Kingdom asks

will this fit a vbm domobar?

Blue Star Coffee Replies:

Hi Luigi, it would fit models with at least 3 years of use - as the fins are thicker than the original PF. See for new models https://www.bluestarcoffee.eu/en/Vibiemme-Naked-Portafilter/m-5618.aspx

Martin from Slovak Republic asks

Hi, I'd like to ask if it'll be lose or not with IMS 57MM 22 basket.

Blue Star Coffee Replies:

Hi Martin, We tested the 57mm tamper with the IMS single basket. There was a little play - 2mm. The IMS B642TH19.5N basket is 57.5mm at the top (and less as you go down, as the basket is tapered) The Ascaso i.280 has even more play - as it 57.3mm inside. So not a perfect fit - a little loose on both baskets.. :-(

Rami from Israel asks

Hi I am looking for tamper station for lelit 57mm Do you have it?

Blue Star Coffee Replies:

Hi Rami, Both the wooden portafilter stations from Motta were developed for the 58mm portafilters. We tested the 57mm tampers and discovered they are too narrow and slipped into the portafilter hole. All the rest of our tamper stations are fine for 57mm portafilters.

Michael from United Kingdom asks

Do you know if this would work with a Francis Francis x1? Thanks

Blue Star Coffee Replies:

Hi Michael, I don't know if this will fit Francis X1 - but they are both 57mm so probably will fit - just cannot confirm.

Marek Brylewski from Poland asks

Hi Would this adjustable fork fit my Eureka Mignon MCI model

Blue Star Coffee Replies:

Hi Marek, It probably does fit ..but the MCI hole is 22mm wide and this is 15mm wide - so there will be a little play and the fork may not be fully stable - like in the specialta.

Lucian from United Kingdom asks

Its hard to tell in the photo and i can find if you state it anywhere, but are these bleached or unbleached?

Blue Star Coffee Replies:

Hi Lucian, There are bleached white, untabbed, and made in Japan. Also available unbleached in 100's pack - see below.

ESG from Sweden asks

What does "Models with 2 fins" mean?

Blue Star Coffee Replies:

Hi ESG, The fins are the ears that hold the portafilter in place. Most portafilters have 2 some have three

keith from Ireland asks

Hi how many grams of coffee should I be using in this basket

Blue Star Coffee Replies:

Hi Keith, The basket comes in 3 heights, the greater the height the more that can fit. The H24 would take 16-18 grams approx. This is not exact as it depends on a few factors - but a good indicator.

Andrew from United Kingdom asks

Will this fit my sage/Breville 58mm naked portafilter

Blue Star Coffee Replies:

HI Andrew, Yes It will fit The 70mm fits Breville: Oracle BES980 Breville: Oracle touch SES990BSS2G Breville: Duel boiler BES920, BES900

Diyar Amin from Netherlands asks

Hi team bluestarcoffee, Will this fit a vintage (aplimont) mini gaggia machine? If so, is there also a rubber ring that matches this showerscreen? Thanks! Kind regards, Diyar

Blue Star Coffee Replies:

Hi Diyar, Probably does fit but cannot be certain - check your measurements. This is - Width 57.3 mm x Height ø 6 mm. Check the lever section for the gaskets - cafelat should fit - but not certain.

Laurence from United Kingdom asks

Will this fit a gaggia classic 2006 model

Blue Star Coffee Replies:

Hi Laurence, This will not fit a 2006 classic, you would need the DeLonghi or Gaggia steam wands. This uses a female nut, the Gaggia uses a male fitting.

Matt from New Zealand asks

If this is always on how long do the batteries last? Or when you say always on do you mean there is no off switch but that it times out after a period of use? Thanks

Blue Star Coffee Replies:

Hi Matt, Batteries seem to last a long time - once activated. There is no/off button - so once activated it will stay on permanently. It will not time out, but stays on.

D.A. from Netherlands asks

Hello, I have a vintage machine with an open boiler. Is it possible to throw the sensor directly in to the boiler in order to monitor the water temperature? Kind regards, D.A.

Blue Star Coffee Replies:

Hi, Dont think it is designed for that purpose, you would probably shorten its life. Better to attach to the coffee group to measure the exit water temp.

Konstantin from Latvia asks

Hello, the system dont allow me to order this machine, ascaso dream one - so disappointing. is it a bug, or its just a trade barier special for my country? anything can be done?

Blue Star Coffee Replies:

Hi Konstan, That was a bug - thank you for pointing that out. We have fixed that now. Many thanks for your help. Regards Gerald Customer service

Harvard from Australia asks

Hi, I have a Bezzera Duo DE (BZ-group volumetrics), wondering whether this will fit my machine. Under fits models "Duo" is listed, however under wont fit "Bezzera De, Te, P # 7479928" is listed. Regards, Harvard

Blue Star Coffee Replies:

Hi Harvard, Yes it should fit your Bezzera Duo DE.

Andrew from United Kingdom asks

How much customs is payable on the mignon zero to the uk

Blue Star Coffee Replies:

Hi Andrew, You will have to pay 20% UK VAT + Duty approx 3-6%

Devon from Canada asks

Hello, I've signed up for the "Back in Stock" alert (Ascaso 57mm bottomless portafilter) but just curious if you have any idea when that would be. Apologies for the annoying inquiry, but I would prefer to purchase from you if possible. Cheers, Devon

Blue Star Coffee Replies:

Hi Devon, sorry for the delay approx 3/4 weeks to restock the black handle version.

Tony from United Kingdom asks

Is this the correct regulator for a francino contempo dual fuel machine?

Blue Star Coffee Replies:

Hi Tony, I think it does fit the Contempo - check the code to be sure GICAR code 9.4.00.10G

Adam from Ireland asks

Would this fit Sage 54mm portafilter?

Blue Star Coffee Replies:

Hi Adam, I don't think it would fit. Try the generic Sage/ Breville basket for a better fit. https://www.bluestarcoffee.eu/en/SageBreville-Filter-Basket/m-5586.aspx

Tom from Canada asks

What size are the holes?

Blue Star Coffee Replies:

Hi Tom, Hole size is 1mm x 4 holes

Tom from Canada asks

What size are the holes?

Blue Star Coffee Replies:

Hi Tom, Hole size is 1mm x 4

Sytse from Netherlands asks

Hi, What is the diameter to the espresso machine of this valve? Many thanks.

Blue Star Coffee Replies:

Hi Sytse, The steam pipe is 10mm in diameter and the thread is 3/8''.

Susannah from United Kingdom asks

Hi there, do you have the necessary parts to mod a Nemox Lux to a steppless grinder?

Blue Star Coffee Replies:

Hi Susannah, Afraid not. We don't have those parts.

Ognjen from France asks

Hello, Is Universal 4 Hole Steam Nozzle M9 compatible with profitec pro 600 machines?

Blue Star Coffee Replies:

Hi Ognjen, Probably does, but not sure. Measure the existing steam nozzle to make sure. The tube inside is 10mm x Thread: 8.5mm

Majid from United States asks

does this fit : Rocket Espresso Mozzafiato Timer Evoluzione

Blue Star Coffee Replies:

Hi Majid, It probably does, as it fits ECM and Rocket models, however, we don't have feedback to confirm, as these are new a product.

Martin from Slovak Republic asks

Hi, what is the bottom diameter size and diameter at the top if I want to put some paper filters in? Thanks!

Blue Star Coffee Replies:

Hi Martin, Inside top is 57.5mm and tapers down to less than that, don't have the exact dimensions of the base.

Mark from Bulgaria asks

Hello, I cannot understand if this portafilter will fit Dedica models EC685? Thank you

Blue Star Coffee Replies:

Hi Mark, This won't Dedica models, you would need this one: https://www.bluestarcoffee.eu/en/Joe-Frex-Ec680-Dedica-Bottomless-Portafilter/m-5482.aspx

Ramiro from Portugal asks

Hello, is the smaller filter suitable for Delonghi Dedica, or do you recommend using a larger filter? Thanks

Blue Star Coffee Replies:

Hi Ramiro, This fits the Delonghi Dedica, the large deep basket is suitable for bottomless portafilters and the smaller double baskets are suitable for double portafilters.

Gavin from United Kingdom asks

Hi, I’m struggling to locate this inside my machine; don’t suppose you could send me a picture of where it is? I strongly suspect I have to replace it - I was cleaning the machine today by running Lilly cleaner through it, and suddenly there was a small pop sound followed by an electrical burning smell, and the machine immediately stopped pulling.

Blue Star Coffee Replies:

Hi Gavin, This is the fuse that sits on the boiler - it is not found on thermoblock versions. It is possible that the boiler seal on the boiler has burst resulting in a leak. The technical dept will send you a separate email.

John from United States asks

What is the thickness in mm of the fins on the side?

Blue Star Coffee Replies:

Hi John, the fins are 7mm thick x 25mm length

Sarit from Israel asks

Can you send it to Israel? Or to Italy?

Blue Star Coffee Replies:

Hi Sarit, We can send it to both Italy and Israel. Choose the delivery address at checkout. 23% EU vat is deducted if sent outside the EU.

James from United Kingdom asks

Do you sell a portafilter for the gaggia cubika, I can't find one anywhere! Thanks

Blue Star Coffee Replies:

Hi James, The Cubika is PF is no longer manufactured. As far as we can tell our Classic range of PF should fit. The only difference is the spout.

Josef from Malta asks

How long is the initial heating time so that one could start brewing coffee?

Blue Star Coffee Replies:

Hi Josef, the machine heats up in 90 sec and an additional 2.5 min for steam. Its fast heating is due to the single thermoblock.

Noa from Israel asks

If I have an old (90's) Gaggia classic with an inversys pump, should I but this one or the ULKA?

Blue Star Coffee Replies:

Hi Noa, Invensys rebranded to ARS - check the code on your pump - this is a CP3A. The ARS is more powerful at 65 watts, EX5 is 48 watts and the connectors point the opposite way. So better get the ARS pump.

Marek from Ireland asks

Hello,I am looking for a pump that will be compatible with Delonghi Dolce Gusto.My pump model is PHOENIX-50 B2P, 53W, 1.5MPa.Thank you Marek

Blue Star Coffee Replies:

Hi Marek, the PHOENIX-50 B2P is more powerful at 53W 1min ON 1Min OFF and EX5 is 48w 2min ON 1in OFF. But the difference is so slight so should be a suitable alternative.

Gregory from United States asks

can you confirm this fits PTFE tube outer diameter 4mm and has a BSP 1/8" thread?

Blue Star Coffee Replies:

Hi Gregory, It is ‎European standard BSP, for the ø 4x2,5 mm PTFE pipe and 1/8" thread.

Santiago from Chile asks

Hi, do you think it will fit a Nemox - Dell'Opera ? (2017). I'm using an Ascaso Competition Fileter 14Gr H23 on the stock pf, if that helps.

Blue Star Coffee Replies:

Hi Santiago, It might fit - they are very similar. Measure the fins to make sure. This one is: Width including fins: 72.4mm x Width without fins: 64mm Fins: 6mm deep x 22mm wide

Michael from United States asks

will this fit a Profitec 700 with its lower group?

Blue Star Coffee Replies:

Hi Micheal, This is a new product so we don't have much feedback yet. It will fit Profitec models but you would have to measure it to see if it fits your model as the knob is the same as an E61 knob. You would need 38mm clearance from the existing mushroom and 52mm for the black knob.

Thomas from United Kingdom - Northern Ireland asks

Do I still need to have a water filter for my coffee machine, if our hotel has a softner for the building?

Blue Star Coffee Replies:

Hi Thomas, Yes - You still need a dedicated water filter for your coffee machine. Usually, the water for the whole building can lose its ability if too much water went into it or is not generated on time. So while handy - they are not reliable. Coffee machine downtime, waiting on repairs and parts is too important to leave to chance.

Mary from Ireland asks

Hi, Can we use on our coffee machine, for the canteen ? or do we need a different one ?

Blue Star Coffee Replies:

Hi Mary, This one is designed for drinking water, it removes the smell of chlorine and reduces the strong mineral taste. While it offers some reduction in lime, it is no substitute for use with a coffee machine. You would need a Purity C Quell St Cartridge system.

Tom from United States asks

Will this work on the original Simonelli Oscar? Mine is 10 years old. Thanks, Tom B

Blue Star Coffee Replies:

Hi Tom, It fits on any vibration pump. It's a tight fit for Oscar - but fits - see the Reddit review on this page.

Cang Le from United States asks

Will this fit for the Rocket Cellini Evoluzione ? Thank you

Blue Star Coffee Replies:

Hi Cang Le, It should fit your model as it fits most Rocket models.

Cang from United States asks

Can this be used for Rocket Cellini Revoluzione?

Blue Star Coffee Replies:

Hi Cang, It probably does fit - but cannot be certain.

Cang from United States asks

Will this fit Rocket Cellini Evoluzione ?

Blue Star Coffee Replies:

Hi Cang, probably does but cannot be certain.

Irina from Ireland asks

Hi,would this basket fit SMEG ECF01? Thank you

Blue Star Coffee Replies:

Hi Irina, I think that it does fit - as IMS state it fits SMEG, and as far as I can tell they only have 1 51mm model. Check our portafilter depth as we have 4 heights. Dimensions: Edge D.61.5mm, Inside D.51.5mm Body 52.5mm

Steven from United Kingdom asks

I’ve just placed an order 108638. Can you add this to the shipment to save postage?

Blue Star Coffee Replies:

Hi Steven, We have sent a PayPal request for 3.21€

James from United Kingdom asks

Good evening, I’ve recently purchased a 2008 Ascaso Steel 2 Duo… (I think!) There’s not much information out there regarding these machines, and I’m trying to work out whether this shower screen will fit my model. The sticker on the base of the machine states INOX DUO M.F. STEAM. My machine currently has a very small, rudimentary looking shower screen with wide holes. It seems to fit but it looks very basic for a machine at this price point and I’ve seen photos of larger screens (a bit like the one pictured) on this machine elsewhere. Happy to provide photos or any other details necessary. Any help or advice gratefully received! Thanks, James

Blue Star Coffee Replies:

Hi James, I think you have the versatile version of Steel, if so, you will need a converter kit to use a ground shower screen. Search Ascaso Versatile To Ground Kit - allows you to have full extraction using ground coffee.

Chris from United Kingdom asks

Hello. Will these burrs fit my Eureka MCI its about ten years old. the modelnumber is EMG50E24G20A00000052 I know it takes 50mm burs, but I just wondered if these 'Flat' ones wil fit. Thank you.

Blue Star Coffee Replies:

Hi Chris, This fits the Eureka MCI

Vojtech from Czech Republic asks

Hi, I have been looking to upgrade my Rancilio Silvia steam wand to a cold touch one, so that I wouldn't get the milk caked on. Going by the description this one seems like it should fit, but is going to be about 2cm longer? Is that the case or am I missing some important detail? Thanks!

Blue Star Coffee Replies:

Hi Vojtech, I cannot confirm if it will fit or not, but the dimensions are the same for our generic steam wand - see Rancilio Silvia Steaming Wand V3. No problem to return if it does not fit.

Maxime from Switzerland asks

In your description, there is a star '*' next to silvia all models compatibility. Anything to pay attention to with using this new portafilter with silvia or is it fully compatible?

Blue Star Coffee Replies:

Hi Maxime, Yes - Fits all Silvia models

Jeff from United Kingdom asks

does it come with a precision or regular basket?

Blue Star Coffee Replies:

Hi Jeff, It comes with a stock basket. We have IMS baskets - sold separately.

Viktoriia from Czech Republic asks

Hello, I would like to ask about the filter's recyclation. We have this filter used at our office but dont know what to do wit it. Please advise. Thank you, Viktoriia

Blue Star Coffee Replies:

Hi Viktorila, You should regenerate the resin beads with salt, approx once per month depending on how much water goes through it. See the video on this product page or the operator manual for more information.

Fares from Denmark asks

What the best pakning for 2 group .

Blue Star Coffee Replies:

Hi Fares, If your Fracino machine is 3 years or older - 9mm thick should suit - if the machine is new 8.5mm would be a better fit.

Catherine Barlow from United States asks

Will this for the Ascaso Steel Uno PID?

Blue Star Coffee Replies:

Hi Catherine, Yes - fits Ascaso Steel Uno PID

Raymond from Singapore asks

Any shower screen that can fit Londinium Vectis?

Blue Star Coffee Replies:

Hi Raymond, We do not have specifications for the Vectis shower. It does use the older traditional type push-on lever shower screen, which may be particular to the Vectis.

Tristan from Singapore asks

Is this suitable for use on Ascasco machines?

Blue Star Coffee Replies:

Yes - it is suitable for Ascaso machines and all brands as well. It contains food-safe Citric acid. Safe to use on aluminum, brass, and stainless steel.

Alex from Malaysia asks

Is this compatible with rocket boxer espresso machine

Blue Star Coffee Replies:

Hi Alex, They are similar but not the same. This is 9 watts and the one you need is 11 watts. You need coil 491514Q3 D4G 11W - we don't have that one.

Jeff from United Kingdom asks

Hi there, when will this item be back in stock?

Blue Star Coffee Replies:

Hi Jeff, due back in 2 weeks - available for pre-order.

Gil from Israel asks

Hi, Will this product be safe for descaling a Bezzera crema/bz13, which is a Hx machine? Thanks Gil

Blue Star Coffee Replies:

Hi Gil, While it's possible to de-scale a prosumer machine, it is a procedure best performed by a technician or competent person. Only the group + heat exchanger + group solenoid could be de-scaled - a pressurized boiler could not be de-scaled.

Tristan from Singapore asks

Does this work for Ascasco Steel?

Blue Star Coffee Replies:

Hi Tristan, Yes suitable for all ascaso models - citric acid is safe to use.

Noémie from France asks

Hello, I'm highly interested in this product. Can you confirm this one is made in italy and not a fake one from china? Can you please provide a picture or something that proves it's italian. Thanks in advance

Blue Star Coffee Replies:

Hi Noemie, We source this from a manufacturer from Milan Italy, they get it directly from Rancilio. It does not state where it was made. This is the latest steam wand made from stainless steel - Previous wands were made from chrome-plated brass.

Ronan from Ireland asks

Will this fit a profitec 400? Thanks

Blue Star Coffee Replies:

Hi Ronan, the Profitec should fit - search #5560

Jason from South Africa asks

Hi, I watched some Youtube videos on this UNO and it seems there is a wait before using the steam wand of over 2 minutes. Some comments suggested that the wait is not as long in UK/EU due to 220v power supply vs the lower power supply in the USA. Could you please comment on this as it would be a key factor in my decision. Thank you. Jason

Blue Star Coffee Replies:

Hi Jason, Yes, you have to wait for the thermoblock to reach the steam point before you have steam, as there is only 1 boiler. (No wait if you have the DUO). The voltage is different in USA 120v v 230v in the EU, think the wait time would probably be the same. 2 min is very little - turn on the steam, and by the time you have your milk and jug collected it's almost time to steam anyway.

Ian from United Kingdom asks

I have fitted this to a 2007 Gaggia Classic. It protrudes far too high to get the cup warmer refitted. The only way to fit it will be to put an elbow out of the pump and fit the Pulsor horizontally - is this permitted by the manufacturer?

Blue Star Coffee Replies:

Hi Ian, any modification would invalidate the manufacturer's warranty. Yes - you should be able to add a 1/8'' elbow fitting - see below.

Keanu from United Kingdom asks

Are you getting more in stock?

Blue Star Coffee Replies:

Hi Keanu, This is due back in 2 weeks.

Jonte from Sweden asks

I dont understand what is stainless steel in this item? The stalk itself? Price for 1 item? The O-ring which fits onto the base (as seen standing up in the picture): price

Blue Star Coffee Replies:

Hi Jonte, This mushroom is made from chrome-plated brass and the o rings listed need to be purchased separately. Yes you are correct - the price is for 1 item.

Dhinesh from Singapore asks

Hi do you ship the Ascaso Steel duo pid to Singapore?

Blue Star Coffee Replies:

Hi Dhinesh, We don't ship machines outside the EU. You would need to source locally so the warranty can be serviced.

Bogdan from Romania asks

Are these fresh roasted coffee beans? I wish you had roast dates on site. Is there a selection of coffees I can buy with roast dates?

Blue Star Coffee Replies:

Hi Bogdan, These were roasted 3 months ago and have a sell-by date of 2 years. Our coffee is usually 1-2 months after roasting.

Yang from Australia asks

Can this handle fit 20 grams basket? Also, do you have 20 grams basket for this product?

Blue Star Coffee Replies:

Hi Yang, This comes with the deep 27.5mm basket 18/20 gram - see La Spaziale Double Basket H27.5 below.

Nigel from United Kingdom asks

Is there a bellows kit for this grinder

Blue Star Coffee Replies:

Hi Nigel, as far as I know, there is none available and ascaso doesn't make one.

Stephen from United Kingdom asks

When will this item be available

Blue Star Coffee Replies:

This is due back by the end of July - we will send you a back-in-stock email.

Kasper from Denmark asks

Hi. Will this fit to a simonelli oscar mood (2022)

Blue Star Coffee Replies:

Hi Kasper, It should fit, but best to measure your PF fins/ears - this one is 6.4 mm - the original is thicker at 6.7mm. So you may have to use a paper shim to make your PF sit at 6 o clock.

Steve from United Kingdom asks

Hi I have cleaned and unblocked my gag is classic, the pump makes a loud noise but will not pump or drawer any water, the pump is working when connected to water supply independently so would it likely be the selanoid that needs replacing Thanks Steve

Blue Star Coffee Replies:

Hi Steve, A common problem with the classic is a blocked solenoid -This sounds like this is your issue. Before replacing the solenoid - try this trick - It may solve the issue. 1. Loosen both the hexagonal screws on the solenoid - approx 1/2 way (don't remove them). 2. Turn on the coffee button for 1-2 sec. 3. Check the solenoid to see if water is exiting the boiler 4. If no water escapes - the boiler group is blocked - if water escapes easily, then the solenoid is blocked and can be replaced. Unblocking the group is a separate issue. Regards Technical dept.

Sotiris from Greece asks

Is this gasket compatible with Lelit PL81T (Grace)? The size of the original gasket is 71mm x 54mm x 7.7mm.

Blue Star Coffee Replies:

Hi Sotiris, won't fit Lelit Grace- this one is MC752-6 LELIT 73x57x8 mm. Unfortunately, we don't supply the grace gasket.

Sue from Ireland asks

Hi, I have taken my gaggia cubika down from the attic after 10+ years in storage ...the heater is heating up ..but there isn't a gig out of the pump. Don't think it's scaled up as it's not even attempting to pump. It made one second noise on the first press of the button then nothing ..no water being drawn up to spray head or steamer. From you experience is it most likely the pump is knackered and replacing it will solve problem. I can send pictures by email if that would help. Kind regards Sue

Blue Star Coffee Replies:

Hi Sue, If the group or solenoid is blocked - then this would be the symptom. There is a blockage somewhere - unlikely it's the pump, as there was some action initially. You would probably have to remove the solenoid 1st -(Allen key anticlockwise) There may be some debris in the valve or group. Try turning the pump on for 1 sec. with the solenoid back on but loose. If water spurts out of the group/solenoid - then blockage has been cleared, if not blockage still remains. Solenoid/group blockage is a very common issue with these models and is worth the trouble.

Elise from Netherlands asks

Hi, I'm owning a Rocket Giotto Evo R model 2019, should I order the generic group ring or the PF group gasket ring?

Blue Star Coffee Replies:

Hi Elise, probably the 8mm gasket should be fine for the 4-year-old model. If the portafilter should slide to 5 o clock position - you can use the paper shim. This will correct it to 6 o clock.

Frank from Ireland asks

I have a gaggua Montana LC/D 2GR. Will this group head gasket set and shower head fit

Blue Star Coffee Replies:

Hi Frank, You have a commercial machine - this is for Gaggia domestic machines such as Classic, Baby, etc., as the shower screen is different. Better get a 9mm gaggia gasket and commercial shower separate.

Elise from Netherlands asks

Thanks for the quick response. The answer however interferes with the information provided in the description. I will order the 8mm if this will fit though.

Blue Star Coffee Replies:

Hi Elise, the 8mm should be fine - if not add the paper shim gasket.

Idan from Israel asks

Fits a new plo42temd?

Blue Star Coffee Replies:

Hi Idan, It will not fit a new Anita PL042TEMD very well. The fins on this generic PF are a little thick at 6mm - PF will sit at 7 o clock instead of 6 o clock. It suits older models better.

Shannon from Ireland asks

Hi. Does the product work for storage of ground coffee, as well as beans? Or only beans? Thanks very much.

Blue Star Coffee Replies:

Hi Shannon, Suits ground coffee and beans or anything that can oxidize when exposed to the air.

Supanan K from United States asks

Does this one fit Dream PID?

Blue Star Coffee Replies:

Hi Supanan, fits the new PID models perfectly.

Tom from United Kingdom asks

Hi. I have a Fiorenzato Bricoletta with a solenoid valve and switched pump (no lever). Will this fit my machine? Thanks.

Blue Star Coffee Replies:

Hi Tom, the Faema Generic E61 Group Mushroom 82mm will fit your model, search for Mushroom 82mm.

Craig Comiskey from Ireland asks

These this fit the cafe racer?

Blue Star Coffee Replies:

Hi Craig, Not certain if it fits that model, probably does, best to check the fin thickness of the SM cafe Racer - this one is 5.7mm thick.

brendon from Australia asks

Would you happen to know if an Ascaso 57mm portafilter handle fit into a Lelit Anita Espresso Machine?

Blue Star Coffee Replies:

Hi Brendon, This will not fit Lelit machines. Search for Lelit 57mm Portafilter Double - this will fit your model.

Bernie from United Kingdom asks

Hi What is the difference between this Flow control and the coffee sensor version ?

Blue Star Coffee Replies:

Hi Bernie, The Coffee Sensor E61 Flow Control is made from Stainless steel and uses a smaller knob and a black gauge. Our flow control is made from chrome-plated brass, uses a larger knob, and has a white-faced gauge.

Jaume from France asks

Hi there, would this a replacement for my pre millenium la pavoni? Thank you

Blue Star Coffee Replies:

Hi Jaume, If your version has this valve already - then yes, it will fit. If you have an older machine with the Teflon valve, you need to replace the entire safety valve body in order to use new valves like this one.

Javier from Mexico asks

Hello! Has this valve been successfully used in a Breville Barista Express machine? Could it work to replace the stock OPV and reduce the output pressure?

Blue Star Coffee Replies:

Hi Javier, I don't know, we would only get this feedback from reviews. Usually, it will reduce by 1-2 bars maximum. See this link from a Reddit user who has success with this OPV https://www.reddit.com/r/espresso/comments/ot08ba/breville_sage_barista_express_opv_upgrade/

Jon from United States asks

Is the handle removable? If so, what is the rod thread size?

Blue Star Coffee Replies:

Hi Jon, The handle is not removable - it is glued. The thread is 10mm. Search for Faema M10 to see the handle separately.

MOTOO from Japan asks

Is this product heat-resistant tempered glass?

Blue Star Coffee Replies:

Hi Motoo, although it is used for hot drinks - It is not tempered glass. It can take temp up to 96°C.

Ronny from Israel asks

Hi I am looking for Smek Double coffee basket stainless steel

Blue Star Coffee Replies:

Hi Ronny, It fits SMEG, they have only one 51mm model. Check our portafilter depth as we have 4 heights. Dimensions: Edge D.61.5mm, Inside D.51.5mm Body 52.5mm

Roger Gredsund from Sweden asks

Dear Sir/Madam at Bluestarcoffee I own a Francis Francis x3 and wonder if this kit will fit my espresso machine due to that I've heard that Francis Francis and Ascaso use the same 57 mm boiler? And I wonder when you will have this kit in-stock again? Or do you have any metal converter (the one on the left side in the picture) left laying around that I can buy from you? Kind Regards Roger Gredsund

Blue Star Coffee Replies:

Hi Rodger, I don't think this would fit Francis - similar but different. Due back 2 weeks.

Tom from New Zealand asks

Hi, what is the difference between this one and a gagga classic one.

Blue Star Coffee Replies:

Hi Tom, This portafilter is for commercial models. It will fit a Gaggia classic but has a longer spout than the Gaggia classic portafilter.

Josip from Croatia asks

Will you be getting the B702THFH26NT?

Blue Star Coffee Replies:

Hi Josip, Yes we are getting more of these - The price may change and we don't have the arrival time yet.

Ian from Ireland asks

Hi, when will you have the Eureka Manuale back in stock?

Blue Star Coffee Replies:

Hi Ian, We expect delivery end of Oct.

Fabrizio Maraschin from United Kingdom asks

Hi Blue Star Coffee Team, I was hoping youd be able to help me out with understanding how postage works to the UK. This is the first time I'd be buying something outside the UK for delivery into the UK. If I purchase the above grinder (or any grinder), are there going to be any additional customs fees etc that I need to pay or will the final price be £168.69 (or whatever the price is on checkout if I choose to add or change)? Best regards, Fabrizio

Blue Star Coffee Replies:

Hi Fabrizio, The price shown, when you visit from the UK, has the VAT removed. While you will have free delivery, you will have to pay UK VAT plus small duty (approx 2%).

Arne from Germany asks

Hi, can this be used on a rancilio Silvia V1 as well? Looking to upgrade the steam wand. Cheers, Arne

Blue Star Coffee Replies:

Hi Arne, This will not fit V1 V2 Silvia as it has a ball socket fitting that needs a spring/socket and gasket. Search '#3054' - this will fit V1V2 Silvia.

Ioannis from Greece asks

Hi there! Will you be stocking the B68 variety for Gaggia machines, the 2014 Classic in particular? Thanks!

Blue Star Coffee Replies:

Hi Ioannis, IMS makes 2 baskets in the Big Bang range - 70mm and 62.5mm. This 70mm will fit Gaggia models, as the other IMS 70mm models fit Gaggia.

Mathieu from Canada asks

The listing says that this part will need an adapter to fit Ascaso PID models prior to 2020. What is the adapter in question? Thank you

Blue Star Coffee Replies:

Hi Mathieu, You would need a kit PM.500 OPV STEEL ASSEMBLY - we don't carry that kit.

EB from United Kingdom asks

Hello, you state "*Most Delonghi portafilters have a PVC coffee disperser inside. You can remove it by unscrewing it to make the IMS basket fit...". If I do this what is the deepest IMS DL basket I can use i.e. 22E/24E/26E/32E mm? Also, does IMS do a Big Bang 51mm basket to fit Delonghi machines, as I can't seem to find it on your website? Thank you.

Blue Star Coffee Replies:

Hi EB, The deepest that the original PF will accept is the 26mm basket.

BASHAR from United States asks

Good morning, I am looking for a good coffee grinder that can grin very fine Turkish coffee, the finest grinding. Please let me know if you have a machine that can perform that function and the price. Thank you

Blue Star Coffee Replies:

Hi Bashar, All the Mignon range is suitable for Turkish, Espresso, Mokka, Drip, and French Press grinds, including this Zero.

James from Iceland asks

Will it fix a Lelit Mara X?

Blue Star Coffee Replies:

Hi James, We don't have any feedback on this fitting Lelit Mara, so cannot say. My best guess is no, probably won't fit. Lelit has its own flow control kit.

Nathan Gray from United Kingdom asks

Does this fit the older Lelit Anna steam wand with the tip that has male threads or the newer tip with female threads?

Blue Star Coffee Replies:

Hi Nathan, this o ring fits on the top of the steam wand going into the brass steam valve. See image

Antonio from Spain asks

Hello, is this item for 1 cup / 7g or 2 cups 14g or both are included in price ? Thx

Blue Star Coffee Replies:

Hi Antonio, this is available in either single 7g or double 14g sizes. Choose type from the drop-down menu.

Antonio from Spain asks

Hello is it possible to get it with 1 cup / 7g basket instead ? Thx

Blue Star Coffee Replies:

Hi Antonio, at present this is only available in the double size, the single basket can be purchased separately by searching " #5774 "

Dean from United Kingdom asks

Hi, will this fit a gaggia g105? Many thanks, Dean

Blue Star Coffee Replies:

Hi Dean, this will fit Gaggia G105.

cyrille from Hong Kong asks

What is the difference between porcelain and standard mushroom?

Blue Star Coffee Replies:

Hi Crylle, The main difference is no mineral build-up on the mushroom stem. Chrome-plated brass will flake over time and even stainless steel will have some magnesium or calcium buildup. Also heats up fast to help with heat stability. Once the mushroom is in place - leave it there as it can get damaged on removal.

Roger from Sweden asks

Dear Sir/Madam Do you guys think this filter can be fitted on a De'Longhi EC 710, due to that you mention the the De'Longhi Icon which is I believe more or less the same machine but in a different body? Kind Regards Roger

Blue Star Coffee Replies:

Hi Rodger, I cannot confirm, probably does fit - but check the dimensions to be sure. Shower size: 50.5 mm x Internal Diameter: 49.5 mm x Height: 9mm

Thomas from United Kingdom asks

Hi, I am interested in this product however I often make americanos and note there is no hot water outlet. Is there an easy way to get produce hot water from the machine?

Blue Star Coffee Replies:

Hi Thomas, You can get hot water by switching on the water switch, water is then diverted to the steam arm - open the steam for the water. Turn off the water switch when you have enough. Alternatively, you can use the coffee group. Water will exit at coffee temp for both the steam arm and group - so you will have to heat the cup 1st. PS If this is going to the UK RM will collect 20% UK VAT + small duty (approx 2.5%)

Se from Poland asks

Hello. I want to buy it for Lelit Glenda. Does it fit regular VST 18g basket?

Blue Star Coffee Replies:

Hi Se, Yes - it will accept VST basket.

Phillip from Australia asks

Are these thermostats genuine Gaggia products.

Blue Star Coffee Replies:

Hi Phillip, These are generic and not original. Made in Italy so quality is very good.

Eric from Spain asks

Hello. Would you know when the VBM pump gauge will be in stock again? I have a list of references to order, and I'm waiting the availability of the pump gauge to order all together. Thanks

Blue Star Coffee Replies:

Hi Eric, due back in 2 weeks. You can preorder and we will dispatch the order when it arrives.

Jason from Denmark asks

Hi there, I don't think this would be compatible with the Sage Bambino Plus (it mentions an inlet house) but just double checking? The machine typically takes a ClaroSwiss Water Filter. Thanks!

Blue Star Coffee Replies:

Hi Jason, The Nical 125 will fit into the tank - but your inlet hose may be slightly wider. The Nical 125 nozzle is 6mm and W40mm x H80mm - The ClaroSwiss is slightly wider and taller at 64mm x 220mm. It will do exactly the same job as the ClaroSwiss but you may have to use a clamp to hold the hose on.

Thomas from United Kingdom asks

How long will this last - is it a life time ? Do I need to replace any thing.

Blue Star Coffee Replies:

Hi Thomas, The DVA manual does advise you to change either the resin or the whole softener after 5-7 years of use. We advise replacing the whole unit after 5 years as it could leak if older.

Mark from United States asks

What are the dimensions for this OPV? Thanks!

Blue Star Coffee Replies:

Hi Mark, 45mm x 30mm x 8.5mm (Silicon hose outlet ) | 1/8F x 12x1mm F

Brad from United States asks

Will this hopper lid fit the mignon crono?

Blue Star Coffee Replies:

Hi Brad, No won't fit the Crono hoppers - it is for the older square hoppers such as #3609 or #3608. We dont have that lid only the hopper - see " #5691"

Manos from Greece asks

About the triple basket, and 18+ grams of dose. Will the delonghi dedica choke up? Asking for light to medium roast, mostly use a local roasters blend of 50-50 Arabica-robusta but also brew with their 100% Arabica blend sometimes and might try single origin. Currently with the stock shower screen and a non-ims bottomless basket 18 grams work fine. Plan to change to ims shower screen and this triple ims basket, which I heard needs finer grind and thus I'm wondering if my dedica might choke up.

Blue Star Coffee Replies:

Hi Manos, If the grind is too fine, then it will choke, you may have to adjust the grind to correspond with the extra qty of coffee.

Manuel from United Kingdom asks

Hi, can I use this grinder tray with the Allground or do you have one that fits?

Blue Star Coffee Replies:

Hi Manual, Not sure if it will fit - See "#5735" for the dimensions of this tray - we updated the description.

Bela from Ireland asks

Hi there, Can I ask about the size of this rubber please? Thank you.

Blue Star Coffee Replies:

Replacement rubber sleeve 150mm x 340mm x 250mcm Replacement rod 24.8mm x 15.5mm x 200mm

Bela from Ireland asks

Hi there, Do you sell separately rubber replacement for this tube? Thank you.

Blue Star Coffee Replies:

Hi Bela, search for "#5983" It is in stock.

Patrick from United States asks

Does the 54mm variant fit a 54mm Breville basket?

Blue Star Coffee Replies:

Hi Patrick, You would need a 53mm tamper search for "#585" or "#5413" for precision baskets.

Greg from Canada asks

Can the drain jet be substituted for this one: https://www.bluestarcoffee.eu/en/Rocket-E61-Brass-Drain-jet-flat/m-5898.aspx

Blue Star Coffee Replies:

Hi Greg, These kits are premade, but you can add parts to it.

Mantegh from United Kingdom asks

Hi, any indication as to when this product will be back in stock?

Blue Star Coffee Replies:

Hi Mantegh, We don't have an ETA yet - probably December, but not confirmed.

Kim from Philippines asks

when will this be available?

Blue Star Coffee Replies:

Hi Kim, Mazzer - Original Blades 151A are due next week (Mid Nov 23)

Sile from Ireland asks

Hi there, just wondering do you have gaskets seal for a San Ramon. F18? Thanks

Blue Star Coffee Replies:

Hi Sile, Yes this will fit San Remo F18 - The original is 8.2mm so you may need to use the paper shim or get 8.5mm if the machine is 3 years +.

Berke from Turkey asks

Looking at the flow control device, in the installation guide you mention that an 12"x 1.5" adjustable wrench is needed to do the installation. Is this different than classic 12" wrenches? Can you also please mention how wide the wrench exactly needs to go to do the installation in milimeter measures?

Blue Star Coffee Replies:

Hi Berke, the Chrome nut is 36mm (1.4" inches) most wrenches will fit. A 12" wrench has length to make removal easy.

Michael from United States asks

Will this fit a La Pavoni Model ECL12?

Blue Star Coffee Replies:

Hi Micheal, It probably does fit - but unfortunately, I cannot confirm.

Paul brealey from United Kingdom asks

Hi, I ordered this item on Fri/Sat as I had lost my item, Sod’s Law today it turned up !!! I would like to cancel please , I do not have an order number as for the life of me I cannot find the e mail from you 🤯, for ref I am Paul Brealey Atway Farm, Bovey Tracey, Newton abbot , tq13 9lz 07968187101 , cheers Paul

Blue Star Coffee Replies:

Hi Paul, you should receive a refund shortly. Glad you found your missing tray.

Mahmood from United States asks

What's the thread size inside the handle on these? M12?

Blue Star Coffee Replies:

Hi Mahood, Yes It uses a 12mm thread. The handle can easily be removed.

Chan from Malaysia asks

Does it fit VA388 black eagle?

Blue Star Coffee Replies:

Hi Chan, It fits the VA Black Eagle,

Octavian from Romania asks

Fits current Lelit Anna pl41tem espresso machine?

Blue Star Coffee Replies:

Hi Octavian, Yes this will fit Anna PL41TEM.

Octavian from Romania asks

Fits current Lelit Anna pl41tem espresso machine?

Blue Star Coffee Replies:

Hi Octavian, Yes this will fit Anna PL41TEM. However, it does not fit quite as well with our generic portafilters, as our fins are thinner. If you want to use this competition with a generic Lelit portafilter you will need to make your gasket thicker using Paper Shim Gasket 0.5mm.

Dave Smith from United Kingdom asks

Hi what set of seals for la Cimbali M29 selectron

Blue Star Coffee Replies:

Hi Dave, It fits the compact M29 and almost all Cimbali, so it should fit fine.

Vladimir Fedor from Slovak Republic asks

Hello, I want to ask if this will work for me 100% on the ECM Classica PID? well thank you

Blue Star Coffee Replies:

Hi Vladimir, Yes - It fits ECM Classika PID.

Dor from Israel asks

Hi, I'm interested in repacing the shower screen, Im not sure which will fit better for my e61 machine. The Matrix screen or ims competition. Could you advise please?

Blue Star Coffee Replies:

Hi Dor, E61 groups have push-on shower screens - so both the Matrix and IMS E61 shower screens will fit. The Matrix acts like a second coffee puck screen, slows the extraction, and can drop the coffee extraction temperature as well.

Christian from Austria asks

Hi, does it also fit for Steel Duo with steam knob? Will it come with latest version of gasket (white instead of black material)? Thanks!

Blue Star Coffee Replies:

Hi Christian, Yes, fits the Duo and comes with white silicon gaskets.

Cedric from Norway asks

Do I need a 58 mm og 58,5 mm puck screen?

Blue Star Coffee Replies:

Hi Cedric, The basket that comes with this PF is 59mm inside, so you can use the 58.5mm or 58mm puck screen. Search for "#3119" to see the basket.

Rohan from Ireland asks

Hi, Does this fit the ESC34.21 model…I am looking for sump and filter for this…thank you

Blue Star Coffee Replies:

This fits Delonghi - Scultura ECZ351 models, See " #5112 " for Distinta models.

BB from Switzerland asks

Will this fit Bellezza Bellona machine?

Blue Star Coffee Replies:

Hi BB, I can not confirm if it will fit Bellezza models or not - however they look very similar.

Denis from Ireland asks

Hi, Will this fit my Phillips Saeco Poemia coffee maker? Thanks

Blue Star Coffee Replies:

Hi Denis, no won't fit Saeco Poemia - we don't have a pod filter basket for that model.

Roy from United Kingdom asks

Hi I am a home barista thinking of buying the Motta europa but don't know which size will be best for me. I currently have a fairly cheap pitcher 500ml which seems to be about the right size. I tend to make flat whites and cappuccino. I use various cup sizes depending on the drink , they are 220ml 200ml and 375ml for the cappuccino. Your advice would be appreciated. Kind regards Roy

Blue Star Coffee Replies:

Hi Roy, For home use - probably 500ml - 750ml is mainly for commercial use. If using 500ml for flat white that will hold up to 450ml or 500ml for frothy milk.

João from Portugal asks

Hi, would you be able to tell me the diameter of the handle at the point where it meets the portafilter? Regards, João

Blue Star Coffee Replies:

Hi João, It is 22.7mm (portafilter end) x 35mm (deep end) x 130mm in length - 12mm thread

Alex from United Kingdom asks

Can you explain how you remove the screwdriver head to change as mine seems fixed

Blue Star Coffee Replies:

Hi Alex, its probably stuck - pull it out with a plyers and it should be freely exchangeable.

andrea from United Kingdom asks

is it an original LA PAVONI replacement piece? thanks,

Blue Star Coffee Replies:

Hi Andrea, This is generic and not original, but it will fit and act the same.

Maitham from Portugal asks

Are these the espresso or filter burrs?

Blue Star Coffee Replies:

Hi Maithan, This is for espresso grind - While this fits the Chrono and Filtro - it is calibrated for espresso grind.

Caleb from United States asks

Is this element made of 100% stainless steel or something else?

Blue Star Coffee Replies:

Hi Caleb, It is not marked steel on the element, but probably is stainless steel. It is the original Rancilio.

Tom Finch from United Kingdom asks

Hi, The sizes listed for this basket don’t seem to match the E&B website - for example, the H24 should be 14-16g? I’m looking for the 16-18g H26, which is out of stock but I see the item is listed as clearance? Does this mean they will not be restocked? Thanks Tom

Blue Star Coffee Replies:

Hi Tom, the coffee qty is approx and depends on a few variables. Yes, this is discontinued from us - we can still get the H26, but it would be the full price. Very good value while stock lasts.

James from United Kingdom asks

Just purchased a few of these. Very good for price. Just curious, do you know if I could use these for freezer storage?

Blue Star Coffee Replies:

Hi James, Probably fine for the freezer - but the freezer option is not listed with coffeevac.

Adam from Hungary asks

HI, I have an old version of Bezzera Hobby. Just red an article the newer version of it called Bezzera New Hobby has a better steaming wand. I'd like to upgrade then the older version... Is this one will fit to my Bezzera Hobby? Thanks in advance, Adam

Blue Star Coffee Replies:

Hi Adam, This will not fit Hobby - hobby uses different fittings.

Seran from United Kingdom asks

Will this work with Breville Barista Max Espresso Coffee Machine VCF126?

Blue Star Coffee Replies:

Hi Seran, While it is not listed - it could fit - check that your valve is a Ceme 588 valve.

Mark from United States asks

Please confirm the IMS screen model fitting Acasco Steel Duo. Also, how long for USA arrival?

Blue Star Coffee Replies:

Hi Mark, It's not listed to fit Ascaso - but the dimensions are the same so should be ok. Shipping by EMS - it may get caught in Christmas traffic - probable ETA would be after Christmas.

Meric from Germany asks

Would you recommend this basket for fruity and funky coffees? If not, which basket would you recommend?

Blue Star Coffee Replies:

Hi Meric, That is a personal taste - these are designed for bottomless portafilters - and help with channeling. I would expect these to only hanse the flavors.

Rodrigo from New Zealand asks

Would it fit ascaso Basic? If it doesn't, do you have one that will? Cheers

Blue Star Coffee Replies:

Yes - It fits the ground version - if you already have a shower screen this size. If you have a versatile version you would need a converter kit.

Wadse from France asks

Hello, I am looking for a good naked portafilter for my EC685. This one looks very good, but does the fact that the fin thickness is thinner than the original not mean that it is a looser fit that could cause leaks? Thanks in advance. Kind regards Wadse

Blue Star Coffee Replies:

Hi Wasse, The fin size is the same as the Decica - so the fit is perfect.

Yu from Japan asks

Will this fit my profitec go, and if so which version is suitable?

Blue Star Coffee Replies:

Hi Yu, Yes it will fit the Profitec Go - probably the 17mm version, as it fits most models - but cannot be certain. 18mm suits the E61 groups as it is deeper.

vincent from Australia asks

Hi do you sell the spring and gasket for this? Looking to upgrade a GCP.

Blue Star Coffee Replies:

Hi Vincent, we don't have the spring and socket gasket for this. I don't know if it will fit the Gaggia classic.

Fausto from Dominican Republic asks

Will it fit Breville 881?

Blue Star Coffee Replies:

Hi Fausto, This is 3/8" fitting - it may fit your model - but cannot be certain.

Josh from United States asks

I have a BFC Classica 2 group machine. The head gasket is wrapped around the screen. Is this the head gasket I need? Your description says remove screen by removing the screw. My screen doesn’t have a screw the screen and head gasket slides over and into the machine. Please let me know if this is what I need or something else. I also have a Viper espresso machine from Italy and I do not know the size head gasket I need can you help with this one as well please?

Blue Star Coffee Replies:

Hi Josh, It fits the Classica - you have a push-on shower screen - see " #443 ". We have no data on the Viper models.

Simon from Switzerland asks

Do I understand correctly that this set is titled as "107C" because you have another set that contains a 104C brew thermostat? Maybe you could title the two as "107C+145C" and "104C+145C" or something. I was a bit unsure at first if this set would really contain both 107C and 145C.

Blue Star Coffee Replies:

Hi Simon, many thanks - we have changed the product title - thanks for your suggestion. It was not very clear.

Tiago from Netherlands asks

Is the paper shim for the classic compatible with this gasket?

Blue Star Coffee Replies:

Hi Tiago, Not a great fit- but should do the job. This gasket is ø 79x56x6.5 mm and the classic shim gasket is ø 72x58mm

Ioannis from United Kingdom asks

Hi will this fit a gaggia prestige model type: SIN 040GT?

Blue Star Coffee Replies:

Hi Ioannis, No - it won't fit the pressurized groups such as Gran Gaggia prestige. We don't have kits for those. Search " #3001 " or " #4820 " for Gran gaggia group gaskets.

Pedro from Spain asks

Does this also fit the Nuevo Simonelli models (Oscar 2 in particular?) I'm looking to replace the stock 4-hole with a 2-hole alternative.

Blue Star Coffee Replies:

Hi Pedro, This could fit NS Oscar, as NS use a male 8mm thread on some models. I cannot confirm if it will fit your model though - check your thread if it is 8mm then it probably will fit.

Jonathan from Sweden asks

Would the thermometer work with an older Gaggia Classic model? Are there instructions as to where/how to connect it? //Jonathan

Blue Star Coffee Replies:

Hi Jonathon, This does not come with instructions. Its maximum range is 110°C - the classic boiler goes to 145°C - but will show the coffee temp 104-107°C.

Tony from Malaysia asks

Is this parts compatible on Rocket Appartamento unit?

Blue Star Coffee Replies:

Hi Tony, search for " #5397 " using our search bar - this is the appropriate kit for Rocket models. Approximately 50% of the fittings in this Feama group kit are common to the Rocket groups.

Vega from Austria asks

Fits to Gaggia pro evo?

Blue Star Coffee Replies:

Hi Vega, The Gaggia Classic Pro uses a 7mm male thread OEM 421944091411, so this will not fit. We don't have this steam nozzle at present.

Vega from Austria asks

Fits to Gaggia pro evo?

Blue Star Coffee Replies:

Hi Vega, The Gaggia Classic Pro uses a 7mm male thread OEM 421944091411, so this will not fit. We don't have this steam nozzle at present.

Vega from Austria asks

Fits to Gaggia pro evo?

Blue Star Coffee Replies:

Hi Vega, The Gaggia Classic Pro uses a 7mm male thread OEM 421944091411, so this will not fit. We don't have this steam nozzle at present.

Mark Wilson from United States asks

What is the diameter of the bottom opening of this portafilter? Can a Weber Unibasket fit in it?

Blue Star Coffee Replies:

Hi Mark, Yes the Weber basket should fit. The stock basket that comes with this portafilter, is 59mm internal, 60mm external, 70mm inc the basket edge, and 28mm in height. Search " #3119 " in our search bar to see this stock basket

Andreas from Greece asks

Will it fit the Sage Barista Pro portafilter?

Blue Star Coffee Replies:

Hi Andreas, It has a 3/8" thread - I cannot confirm if Sage uses the same thread - probably does - but cannot confirm.

Vedran from Austria asks

Dear Bluestarcoffe Please answer the following questions. Is it a single dose, ie. 7-9 gr.? In the picture it looks like a 1 cup basket, while in the description it says that it is a 2 cup. Is it suitable for Gaggia clasic evo?

Blue Star Coffee Replies:

Hi Verdan, This is a 1-cup basket suitable for 7-10 grams of preground coffee- Thanks for pointing this error out.

Daniel from Sweden asks

Do you also sell the new version 2200064?

Blue Star Coffee Replies:

Hi Daniel, We don't have that part. Regards, Customer service.

Hmtt from Singapore asks

Hi, does this fit Gaggia Classic NL9206AD -4 Drachten 2018 model?

Blue Star Coffee Replies:

Hi Hmitt, If you have the aluminum boiler then it will fit, your version.

Giovanni from Norway asks

Hi, could this product be used to replace the Parker KP07 coil for the Gaggia classic? thanks

Blue Star Coffee Replies:

Hi Giovanni, they are both 9W - but I cannot confirm if they are the same internal size - probably not.

Jon-Paul from United Kingdom asks

Hi Any idea if this steam knob will fit a Profitec Go. Would look sweet with mhw-3bomber portafilter. All the best Jon-Paul

Blue Star Coffee Replies:

Ho Jon-Paul, I don't know if it would fit Profitec - probably does - Thread: 18mm - 1mm -measure your thread to be sure.

jeff from United States asks

HI, what is the diameter of the ball on this wand? thx

Blue Star Coffee Replies:

Hi Jeff, cannot say - but it fits neatly into a 3/8 thread.

Lars from Sweden asks

Hello, what is Fluid o Techs model number for this pump, please?

Blue Star Coffee Replies:

Manu Code is CA0054AGAFN2800

Jack from Ireland asks

Hi guys would these burrs fit a Mythos 1 grinder?

Blue Star Coffee Replies:

Hi Jack, search for " #5144 " in our search bar - for Mythos generic blades.

Rory from Ireland asks

Does this portafilter also fit a Nuova Simonelli Musica?

Blue Star Coffee Replies:

Hi Rory, I don't know if it will fit or not - search for " #5338 " - this NS portafilter will fit Musica.

Claudio from United States asks

i have the lelit anna PL41 Temp - 57mm group head is this the MC 137 part for this unit - shower screen ? thanks is this the correct screen ?

Blue Star Coffee Replies:

Hi Claudio, The Anna can take either this thin 51.5mm or the thicker 52mm version Mc752-4- see below or search in our search bar for " #5297 "

Bruno from Belgium asks

Hi, The 187C Mazzer is supposed to have a 83mm diameter but it is written that this one is 81mm instead. Is there any error? Thank you

Blue Star Coffee Replies:

Hi Bruno, well spotted! - that was an error as they are 83mm wide - we have fixed the description - many thanks!

Sarah from Ireland asks

Hello, Would this work as a Gaggia classic water tube? You have a similar product which has been out of stock for some time, so wondering if I could use this and simply cut it to size? Thanks Sarah

Blue Star Coffee Replies:

Hi Sarah, we have both in stock - not sure if the smaller one 30cm would fit - but we have both in stock.

Vedran from Austria asks

Is it possible to order an original part from you? Best Vedran

Blue Star Coffee Replies:

Hi Vedran, we don't carry the original Rancilio rocky blades.

Otakar from Czech Republic asks

Hello, does this portafilter fits the Lelit Elizabeth PL92T machine?

Blue Star Coffee Replies:

Hi Otaker, Yes - this is the same as " #5302 " - due back end of Jan/24

andres from Argentina asks

What precision basket do you recommend for this filter holder? I have a Pavoni before 2000.

Blue Star Coffee Replies:

Hi Andres, See the bottom of this page or search for " #5518 " using our search bar.

Mark from Canada asks

What is the outside diameter on the drain tube of this product?

Blue Star Coffee Replies:

Hi Mark, the drain tube is 10mm - it fits the rocket drain hose (10 x 14mm hose)

jon cunliffe from United Kingdom asks

You are showing a Rocket E61 Steam tap rod in stock. is it the 6.6mm one that will fit a 2014 Classic machine ? the newer ones look exactly the same but are longer and won't fit.

Blue Star Coffee Replies:

Hi Jon, the Dimensions are: Pin diameter 5.8mm x 74mm length x 14mm brass grommet holder

Dylan from France asks

Hi there, what is the total weight of this portafilter please? Thanks

Blue Star Coffee Replies:

Hi Dylan, Its shipping weight is 600g, but may be slightly lighter.

Laura from Spain asks

Hello! I would like to know if this thermostat works for my Lelit Anita or Lelit Anna PL41E, which currently has a thermostat of 125 degrees, which means that it does not have good steam to make latte art. Greetings

Blue Star Coffee Replies:

Hi Laura, 145°C would put too much pressure on the boiler - the max I would go to would be 130°C - which is not available.

Roy from United Kingdom asks

Hi. I received a replacement set of Conical Burs, thank you They are the correct size but in my Lelit Grinder, the 3 bladed pusher below them is broken on the nut:(. Can you supply me with another? Many thanks*Roy

Blue Star Coffee Replies:

Hi Roy, We don't have that part.

Guy from Canada asks

Does it fit with standard 58mm filter basket?

Blue Star Coffee Replies:

Hi Guy, we tested it against our 14g ridged, 21g unridged, and Rancilio OEM - fitted perfectly. Fits IMS as well. Most stock baskets tend to be oversized anyway - so it should fit yours - but cannot guarantee it. Measure inside to make certain.

Alex from United Kingdom asks

Could you please tell me what size the dosing cup is?

Blue Star Coffee Replies:

Hi Alex, Height: 70mm 2.76''x Diameter: Inner edge ø 55mm 2.17''x Outer edge 56mm | inc ridge ø 67mm 2.64'' | Capacity: 45 grams Search " #5701 " in our search bar for more info.

Youngjin from Korea Republic of asks

Where is this product manufactured?

Blue Star Coffee Replies:

Hi Youngin, This is manufactured in Milan Italy.

Storm from Denmark asks

Will this fit a Rocket Giotto from 2018?

Blue Star Coffee Replies:

Hi Storm, Yes, this will fit all E61 groups, Inc. Rocket Giotto 2018 and onwards.

john from Greece asks

fits 57 mm portafilter?

Blue Star Coffee Replies:

Hi John, yes accepts 57mm portafilters - not perfectly as it is designed for 58mm - but fits fine.

Sarah from Ireland asks

Hello, Does this include the internal copper pipe (29 in the diagram). Thanks Sarah

Blue Star Coffee Replies:

Hi Sarah, This does not come with the copper pipe. We cannot get one.

Tommy from Singapore asks

May I know this burr same as SSP hu? Tq

Blue Star Coffee Replies:

Hi Tommy, They fit the same, but our generic titanium is rated at 2000kg, while the SSP HU red speed is rated at 10,000 pounds or 4536KG, before they need to be changed.

Maeve from Ireland asks

Hi, when will the 53mm be back in stock?

Blue Star Coffee Replies:

Hi Maeve, Due back in 3/4 weeks. I have set it now for preorder.

Olov from Sweden asks

I see it fits the Silvia. Does it fit the Silvia Pro X?

Blue Star Coffee Replies:

Hi Olov, Yes it will fit Pro X, you will need the paper shim included.

Artur from Netherlands asks

Hi, Do you know when these might be back in stock? Thanks in advance. Beste regards, Artur Muzicant

Blue Star Coffee Replies:

Hi Artur, Due back approx 3/4 weeks.

Heike from Ireland asks

What is the length of this spoon, please?

Blue Star Coffee Replies:

Hi Heike, The length is 11cm or 4 1/4 inches

Ali from United Kingdom asks

Are you have Eureka 50mm OEM filter burr?

Blue Star Coffee Replies:

Hi Ali, Search using our search bar " #5687 " for 54mm that fits Eureka Mignon Brew pro, Design and Specialilta filter burrs.

Matt from United Kingdom asks

Is this the original boiler or the updated (Evo) version with non-stick coating?

Blue Star Coffee Replies:

Hi Matt, this is the orignal Gaggia without the non-stick coating.

Maura from Ireland asks

When will the 53mm be back in stock? Thanks

Blue Star Coffee Replies:

Hi Maura, We don't have an ETA, (probably mid-march, best guess). We have 53mm Dyamo metric - use our search bar " #3366 "

Graeme from United Kingdom asks

Will this wooden lid fit the mignon libra grinder hopper?

Blue Star Coffee Replies:

Hi Graema, yes fits Libra as well

Rob from United Kingdom asks

Hi, My boiler suddenly stops working, it switches on and light come on, but I only get cold water, the fuse looks fine from what I can see with my untrained eye, anything else I should investigate before buying a boiler replacement? I’ve put a photo here if you have time to have a look? Kind regards, Rob https://www.icloud.com/sharedalbum/#B135oqs3qqWZbc

Blue Star Coffee Replies:

Hi Rob, Sounds like the boiler is gone - especially if it's over 5 years old. The fuse does not look burned, so it's probably the boiler.

Greg from United States asks

I have a bezzera magica. Will this knob replace the black plastic ones that came with the machine? Steam, hot water and pump actuation?

Blue Star Coffee Replies:

Hi Greg, The Bezzera handles are 8mm, so should fit the same as the round knob.

Juraine from Qatar asks

Does it Fits 57 size portafilter as per description like Lelit Anita? please confirm, hence not included in the "Fits Model"

Blue Star Coffee Replies:

Hi Juraine, It will accept the 57mm puck - perfectly.

Eoin from Netherlands asks

Is this only usable with the brass piston? I have the standard piston.

Blue Star Coffee Replies:

Hi Eoin, Fits La Pavoni lever piston Brass or steel.

Tim from United Kingdom asks

Can you please confirm that the gauge will not clash with the boiler when using this adapter on a Europiccola? I have ordered a very similar looking part from a different website in the past and the gauge could not screw on completely because it hit the boiler. Cheers

Blue Star Coffee Replies:

For older Europiccola made in 1980s, the gauge tends to touch the boiler, if you remove the plastic protection cover during screwing and put it back on after - it should be fine.

Campbell from United Kingdom asks

Does this work with the La Marzocco Micra? Thanks

Blue Star Coffee Replies:

Hi Cambell, I cannot confirm - but probably does fit the Mirra as it fits all the other models.

Tim from United Kingdom asks

Hi there, is this the OEM La Pavoni part? I believe it causes the gauge to clash with the boiler. Or is this a custom partt? Cheers

Blue Star Coffee Replies:

Hi Tim, this is an aftermarket nut - not the original Pavoni. It was designed for the larger 1.6L 16-cup Professional and Stradivari models. For older Europiccola made in 1980s, the gauge tends to touch the boiler, if you remove the plastic protection cover during screwing and put it back on after - it should be fine.

Noor Izlina from Malaysia asks

What is the material of the shower screen? Is it aluminium

Blue Star Coffee Replies:

Hi Noor, it is made from stainless steel.

Mihir from United States asks

Do these come pre-lubed with silicone grease applied at the spring/plunger?

Blue Star Coffee Replies:

Hi Mihir, They don't come with lubrication, inside is a spring and grommet - the o ring keeps it tight and from getting loose over time. Lubrication is unnecessary.

Jane from Ireland asks

Is this just for use with beans, or can it be used for ground coffee?

Blue Star Coffee Replies:

Hi Jane, It will keep ground coffee fresh as well.

Shehan from Sri Lanka asks

Will this basket fit the rocket naked portafilter?

Blue Star Coffee Replies:

Hi Shehan, Yes fits our rocket portafilters.

Rashad from Canada asks

Can this be used to descale: Nuova Simonelli Musica Miele built in Espresso Machine, Best regards, Rashad

Blue Star Coffee Replies:

Hi Rashad, This is made from food-safe citric acid, suitable for descaling coffee machines. Follow your manufacturer's instructions carefully.

Sen from United Kingdom asks

Approximately how long does it take from ordering to posting to London, UK?

Blue Star Coffee Replies:

This takes approximately 1 week after shipping. Customs will add an extra 1-2 days. (20% VAT + 2% duty + RM admin will be due )

Anthony from Ireland asks

Which 8mm gasket for ECM Synchronika

Blue Star Coffee Replies:

Hi Anthony, Choose 8mm if the machine is new, or 8.5mm if older than 2 years. Silicon or rubber is fine.

Tommy wong from Ireland asks

Hi I purchased matrix shower screen from you..it is great and amazing. Currently I am using with paper filters to reduce the cleaning process. Can I use metal puck screen? Can it damage the shower screen?

Blue Star Coffee Replies:

Hi Tommy, Using paper filters would be better. However, if using a puck screen, use a thin one - a thick one will decrease the qty of coffee in the basket, slow the extraction, and drop the temperature of the coffee.

Nataniel from Singapore asks

Does this fit r58 v1 model? or do you have any steam pipe that does?

Blue Star Coffee Replies:

Hi Nataniel, It won't fit the R58, as the steam wand fitting is at a right angle and the R58 uses an angled steam tap.

Sara from New Zealand asks

Hi, would this basket fit an Ascaso Dream bought in 2012? Thanks.

Blue Star Coffee Replies:

Hi Sara, yes, should fit the Dream 2012 - See the image in the image section to confirm.

Simon from Denmark asks

Hello I need a Opv for my nuova sim. Oscar 2- Can I use this one?

Blue Star Coffee Replies:

Hi Simon, One of our customers successfully installed this OPV on a Nuova Simonelli Oscar I - so probably will fit - but cannot confirm.

Siviroon from Thailand asks

Is there any other model that fits Asacaso steel uno [ no PID]?

Blue Star Coffee Replies:

Hi Siviroon, Search using our search bar for " #5195 " or " #445" - these will fit exactly the same.

Joe from Canada asks

Do they have a roasting date?

Blue Star Coffee Replies:

Hi Joe, last batch received was roasted 18/01/24

Sundeep from Ireland asks

Hi, Does it fit a Bezzera Matrix DE?

Blue Star Coffee Replies:

Hi Sundeep, Yes fits Matrix.

Mate from Hungary asks

Hey:) I am wondering if this fits a pre-mil La Pavoni Europiccola machine. Also I'd like to ask if this product is an original made by La Pavoni or an unbranded replacement part. Thanks:)

Blue Star Coffee Replies:

Hi Mate, Yes - Orignal Pavoni, and should fit models made before 2000 - check that your old wand is the same - can be slotted on.

Kendall from United States asks

How is this plumbed to an existing fluid O Tech pump?

Blue Star Coffee Replies:

Hi Kendall, We have now added instructions - see how to fit tab. Also see our easy to fit OPV - Search using our search bar " #5613 "

Richard from Ireland asks

Is it recommended to fit the shim on Rancilio Silvia v5 as the portafilter locks more to the right than the old rubber gasket

Blue Star Coffee Replies:

Hi Richard, If your portafilter sits at 5 o clock at present, then using the shim it should sit at 6 o clock.

LEONIDAS from Greece asks

Hi, I want to buy the mazzer 233m burrs and they write the shipping costs 5 euros and when I go to checkout the shipping costs become 16 euros.

Blue Star Coffee Replies:

Hi Leonidas, Select ELTA Int untracked, slower but cheaper €4.50. (There are weight and price restrictions for untracked) Tracked mail is 16€ .

Simon from Netherlands asks

Hi This product is out of stock, will this be in stock again in the future. If not, can I use the 58mm version for my Ascaso Dream?

Blue Star Coffee Replies:

Hi Simon, this is on order - due in April. It is for 57mm versions. The Dream PID and Dream one use the 58mm version - see fits tab on this page.

Joao from Portugal asks

Will this fit the La Pavoni Baretto LPMBRT05EU ? Thanks

Blue Star Coffee Replies:

Hi Joao, It fits the pressurised version of Baretto - not suitable for the non-pressurised version. We don't sell that version.

Ben from Australia asks

Which gasket should I get for a Elektronika ll Profi? Purchased in 2018.

Blue Star Coffee Replies:

Hi Ben, your machine is 6 years and domestic so 8.5mm should be fine.

Chloe from United Kingdom asks

Hello, I have a 54mm bottomless portafilter which fits my Sage/Breville espresso machine (but is not made by Breville itself). Could you please confirm whether this tamper should be compatible? Many thanks, Chloe

Blue Star Coffee Replies:

Hi Chloe, This 54mm tamper will fit 54mm baskets - however, most Breville portafilters are 53mm. Search using our search bar for " #585 " for our 53mm tamper.

Boris from Croatia asks

Hi, will H32 fit into Joe Frex EC680 Dedica double portafilter? I did measure it on my own and it is approx. 33mm deep portafilter next to wall, so in theory it could fit H32, but if you could test it, I'd appreciate. Additionally, which leveler would fit H32? I own 51mm leveler, but due to fact that other IMS baskets I own are conical, it cannot go deeper than a millimeter or two.

Blue Star Coffee Replies:

Hi Boris, Yes - this H32 deep basket does fit the Joe Frex delonghi double portafilter.

LEONIDAS from Greece asks

Is it ok for Gaggia classic before 2015?

Blue Star Coffee Replies:

Yes - 58mm puck screen will fit Gaggia Classic Baby and commercial models. Not suitable for pressurised portafilters.

Juan Pablo from Spain asks

Hi, In "fits models" tab you don't mention Expobar Office Leva. I have one and the mushroom is 80mm long. Can you please confirm if it's good for it and, if yes, to add the model on the "fits models" tab? Thank you

Blue Star Coffee Replies:

Hi Juan, It should fit Office as well. We have added it to the tab now - many thanks.

M from United Kingdom asks

Please does this replace SP0001618?

Blue Star Coffee Replies:

This can be used to replace the PVC fitting - it has a 1/8" threaded end - so you will have to remove the PVC fitting in order to screw this metal one. - see images for more information.

Max from Portugal asks

Hi, I have a post 2000 La Pavon Professional and I am looking for a double shot filter basket. There are two options for the IMS double basket. Wich one will work best with my machine? H25 or H29 ? Many thanks Max

Blue Star Coffee Replies:

Hi Max, The deep H29 is for naked portafilters and H25 is fine for double portafilters. If using the deep basket you may have to make the grind a little coarser.

Attila from Spain asks

Hello, Do you know i it fits to Bezzera BZ07 please? Thanks, A.

Blue Star Coffee Replies:

Bezzera use portafilters that have a 3/8" spout - so yes fits onto Bezzera PF.

Alexandru from Romania asks

Could you tell me if this tamper (57mm) it fits the ascaso competition 57mm bascket better then the dvg dynamo metric self leveling tamper? I want to choose a self leveling tamper for lelit 57mm with an ascaso bascket and i dont know what to choose. Thx,

Blue Star Coffee Replies:

Hi Alexandru, They both fit - but the Dynamometric pressure is adjustable - The Joe Frex base height is adjustable but the pressure is limited to the weight of the tamper - which is a lot.

vladimir from United States asks

чем отличается comandante lynek c40 mk4 отcomandante c40 mk4

Blue Star Coffee Replies:

Hi Vladimir, I think that they are the same - both have the nitro blade

Azara from United Kingdom asks

Does it fit for sage barista pro as my flow meter reference is 974-9501-B thank you

Blue Star Coffee Replies:

Hi Azara, While this FM looks the same and is the same size 6mm - I believe that they are different.

Gregory from Canada asks

I have a Rocket Giotto (E61 brew head) and would like to know if: 1) This will fit? 2) Will I need to use the supplied "bottom group spring"? Cheers, Greg

Blue Star Coffee Replies:

Hi Gregory, Yes it fits Giotto and yes you will need the bottom spring - it cancels the preinfusion.

Florian from France asks

Hi, Will this tamper fit my Lelit Anna Bottemless 57mm portafilter perfectly? Thanks, Flo

Blue Star Coffee Replies:

Hi Frorian, our Lelit Anna generic stock basket is 57mm - so the 57mm tamper should be fine. The IMS basket is 57.5mm so 57mm tamper will be loose.

Torin from United States asks

What size Baskets does this fit? Will it fit a 20g or 22g IMS?

Blue Star Coffee Replies:

Hi Torin, the 20g basket fits - the 22g won't fit.

Endre from Hungary asks

Hi, Do you have a generic E61 double spout portafilter without handle? As I have a spare M10 handle... Thanks. Endre

Blue Star Coffee Replies:

Hi Endre, this portafilter can be unscrewed - the spout and handle can be removed.

Ryan from Netherlands asks

Does this fit the new gaggia espresso ,Gaggia EG2109

Blue Star Coffee Replies:

Hi Ryan, We do not have any information on Gaggia EG2109, suggest you measure your existing basket to see it it fits. This one is 25mm deep x 53mm Width (60mm inc rim)

Roger Hope from United Kingdom asks

I have a Bar model.Whwre do I find the date of manufacture?

Blue Star Coffee Replies:

Hi Rodger, ascaso usually have a silver label with the manufacture date - under the drip tray. This group is for is for 57mm portafilters so may not be suitable. Send an email to bluestarcoffee.eu@gmail.com and we will work out which group will fit.

Vedran from Croatia asks

Hi! Would this model fit Profitec GO? Thank you!

Blue Star Coffee Replies:

Hi Vedran, It should fit the Profitec Go just fine

Gerry from Ireland asks

Will this product fit Botticelli evolution speciality

Blue Star Coffee Replies:

Hi Gerry, No - the La Pavoni Botticelli Specialty is an E61 machine - so only E61 baskets will fit. See parts + Portafilter baskets and click 58mm baskets

Gerry from Ireland asks

Will product fit new evolution special?

Blue Star Coffee Replies:

Hi Gerry, No - the La Pavoni Botticelli Specialty is an E61 machine - so only E61 baskets will fit. See competition baskets in our E61 section.

Teodoros from Greece asks

Hi, this will fit the 51mm Delonghi ECP 35.31?

Blue Star Coffee Replies:

Hi Teodoras, No, this will not fit any models other than the La Pavoni lever. Search in our search bar " #5110 "

Richatd from Netherlands asks

Hello, Does this double portafilter fits in the La Cimbali junior (old model)? Kind regards, Richard

Blue Star Coffee Replies:

Hi Richard, The fins on this may be too thin, (would sit at 5 o clock) add a paper shim or 2 and it should fit ok.

Robert from Croatia asks

Hi, is this double spout glued or is adjustable? Is handle glued or is changeable? Thank you

Blue Star Coffee Replies:

Hi Robert, The handle is not glued - but the spout may be glued or tightened very tight. Can be removed with a screwdriver inserted into the open spout.

Robert from Croatia asks

Hi, one question, is this spout glued or adjustable? And second, most importantly, does fit here IMS BigBang basket B702TFH25.5BB (height 25,5 mm)? Thank you

Blue Star Coffee Replies:

Hi Robert, Both the handle and spout are glued. H25.5 will fit this PF

Michael from United States asks

Is this Blue Star branded temperature probe compatible with the Coffee Sensor branded temperature probe frame?

Blue Star Coffee Replies:

Hi Michael, Yes it fits the CS frame.

Luca from Italy asks

Hi, the opv spring in the kit is 12 or 9 bar?

Blue Star Coffee Replies:

Hi Luca, there is no spring in this kit.

Bogdan from Romania asks

Is this really compatible also with 57mm baskets? IMS/Ascaso? I need it for Lelit 57mm portafilter.

Blue Star Coffee Replies:

Hi Boddan, Yes fits 57mm baskets - but there will be a 2mm gap on the inside.

Marie Kennedy from Ireland asks

When will the above grinder be in stock again? Kind regards Marie

Blue Star Coffee Replies:

Hi Marie, Due back End of April.

David from Ireland asks

Hello, Can this fit the Gaggia Espresso style? It does not mention compatibility in the description. Thanks,

Blue Star Coffee Replies:

Hi David, I cannot confirm, if it fits the Espresso style, but it is very close in every respect. Your machine uses a pressurised system, so you would have to make the grind finer and reduce the pressure of the OPV to 9 bars to use a bottomless PF.

Iain from United Kingdom asks

Hi. I have just fitted this but not tried it yet as i am doing a service and descaling. Is the handle completely closed when it is screwed all the way down, clockwise, and fully open when screwed counter clockwise all the way up? So to use the machine normally with no flow control the handle would be screwed all the way up? Thanks.

Blue Star Coffee Replies:

Hi Iain, Yes when the handle is rotated clockwise - it is fully closed and anti-clockwise fully open.

Sue from United States asks

I have a Simonelli musica. My steam wand drips water (slowly but consistently) even when the machine is turned off. I replaced the o-ring on top of the nozzle. Still dripping. Have any ideas as to what part needs replacing?

Blue Star Coffee Replies:

Hi Sue, probably your steam tap is leaking - we have a kit see " #3515 ".

Roman from Switzerland asks

Does it fit on la Pavoni domus bar lpcmb02eu

Blue Star Coffee Replies:

Hi Roman, No won't fit - search our search bar for " #3497 "

Giovanni from Italy asks

Which one for the Lelit Bianca with bottomless portafilter?

Blue Star Coffee Replies:

Ciao Giovanni, the 17mm will fit a Lelit 58mm model such as Bianca

Duncan from United Kingdom asks

Hi Guys, I have a Gaggi Classic (2010 or possibly a little earlier) with a Parker KP07 7W coil.It seems that this will be a suitable replacement. Can you confirm that this is likely to fit please? Thanks Duncan

Blue Star Coffee Replies:

HI Duncan, if you have the aluminium boiler, this larger solenoid will fit. Its base is the same size, but the coil is bigger and stronger than the older Ceme valve.

Yovko from Bulgaria asks

Just wondering... will this fit other E61-like 58mm machines like Profitec Go or ECM?

Blue Star Coffee Replies:

Hi Yovko, Yes it will fit E61 machines as well.

marc from France asks

hi, do that fit for a lelit pl62t ? thanks , Marc

Blue Star Coffee Replies:

Hi Marc, Yes, fits Lelit Mara PL62T

Andrew from United Kingdom asks

Will this thermometer fit the Rocket Mozzafiato? It's a different machine to the Appartamento, but may use a similar E61 group head. Thanks!

Blue Star Coffee Replies:

Hi Andrew, I think it fits all Rocket E61 groups, inc Mozzafiato. To be sure remove the group screw and measure the depth - If your e61 chamber is shorter than 16mm, the probe would be too long and would block the coffee.

george from Slovak Republic asks

How is the basket measured? i have definitely premillenium europiccola but when measuring the basket with the outer edges it is 54mm when measuring the top inside without the edges its 51mm

Blue Star Coffee Replies:

Hi George, This stock basket is 60mm outside and 52mm internally and fits machines made after 2000. Our stock basket is the pre-millennium basket which is 58mm outside and 50mm internally. You need the La Pavoni - Bottomless Portafilter before 2000

Bob from United Kingdom asks

Will these fit Promac MD CLUB?

Blue Star Coffee Replies:

Hi Bob, I cannot confirm - they are both 50mm - but the screw hole or blade pattern may be different. See our Rancilio Rocky blade - Using our search bar for " Promac MD CLUB " for generic burr.

Noel from Ireland asks

What is the diameter of the solenoid hole?

Blue Star Coffee Replies:

Hi Noel, Its 14.6mm x 9.7mm and will fit " #5537 " and " #5540 " - use our search bar.

Mairin from Ireland asks

Are these stove top pots suitable for induction hobs

Blue Star Coffee Replies:

Hi Mairin, While they can be used on Induction hobs - the base is very small and won't suit all Induction hobs - the base is 60mm. You would need to check if your hob accepts this small base.

Marco from United Kingdom asks

Will this fit a Gaggia classic portafilter? 2007 model

Blue Star Coffee Replies:

Hi Marco, It should fit any classic - check that yours looks like " #3392 " or " #3385 " using our search bar. It fits any PF with a 3/8" thread. Make sure you can remove your spout 1st.

MJ from Slovenia asks

Would this fit a breville barista pro?

Blue Star Coffee Replies:

Hi MJ, It fits 3/8" spouts so probably - cannot say for certain.

Ralph from Switzerland asks

Hi What is the exact type description ? I have recently a campini Typ98 but I want to replace this one with one which can be easy adjusted. Thanks Ralph

Blue Star Coffee Replies:

Hi Ralph, It is P203T01 2-POLE 20A 1/4" - see specifications for more information.

Tommy from Singapore asks

May I know do you have titanium coated version?

Blue Star Coffee Replies:

Hi Tommy search using our search bar for " 5932 " for Generic Mazzer titanium burr.

Colin from United Kingdom asks

What is the hose diameter?

Blue Star Coffee Replies:

Hi Colin, Outside diameter: 8.2 mm x Inside diameter: 4.2 mm

Bill from Ireland asks

Can you grind the beans for a French press please

Blue Star Coffee Replies:

Hi Bill, These come in whole beans - but we have in ground 500g size - It is called Oro but it's the same as Giotto - both are the same bean roasted by Caffe Agust. Search for " Oro " using our search bar.

Borre from Netherlands asks

It says in the product description that it fits Eureka Silenzio. But the biggest cutout measurement says 27mm, that's too small to fit my Silenzio. Are the sizes incorrect or does this mean that it is not a perfect fit?

Blue Star Coffee Replies:

Hi Borre, We checked this originally on the Silenzio and was a good - see the product images - not a perfect fit as you had to manoeuvre it. The Eureka funnel is a better fit. Search for " #5985 " using our search bar.

Dianne from United States asks

I'm looking for 2 porta filters for this machine...thx. A Conti commercial no ,96213 059 002 220 by 4590 etc..60 hz

Blue Star Coffee Replies:

Hi Dianne, we have 2 options this generic version and the original - search our search bar for " #6047 "

Tony Kinsella from Ireland asks

Do you have gaskets for Marzocco 2Group and 3 group manufactured 2020. Thanks

Blue Star Coffee Replies:

Hi Tony, - choose 7mm, as your machine is older.

Benjamin from Denmark asks

I did just receive both the double spout and bottomless portafilter for Gaggia Classic pro. Both aren’t tight enough in the group head when it’s straight so a lot of water slips through around the portafilter and group head. Both must be tightened more over to the steam wand which seem like the portafilter doesn’t fit properly. What to do?

Blue Star Coffee Replies:

If PF is sitting at 5 o'clock, then you can add a paper shim to make the gasket thicker. Or replace the existing gasket - Insert " #5128 " into our search bar for silicon gasket and paper shim.

Daniel from Switzerland asks

How much customs will I need to pay at the reception of this product?

Blue Star Coffee Replies:

Hi Daniel, You will have to pay 8.1% VAT + admin + duty (duty is approx 2% but can vary) Swiss Post charges 13 francs for customs clearance service + 3% goods value

Conrado from Switzerland asks

Is this valve compatible with the Rancilio Silvia, v2 and v3?

Blue Star Coffee Replies:

Hi Conrado, Yes fits Silvia V2/V3 as well.

Adrian from Canada asks

Hi my machine requires a 3 prong porta filter as opposed to a 2 prong such as the gaggia do you have a 3 prong porta filter available that is compatible with this pressure gauge?

Blue Star Coffee Replies:

Hi Adri an, We have the gauge separately. Using our search bar insert " #4975 " or " #5031". Both of these gauges are 3/8 " which fits most PF spouts.

Darren from United Kingdom asks

Hi,I recently purchased one of these but have only just got round to opening it due to my Mother in Law passing away, so apologies for the late question. You advertise this as fitting the cherub, but the spout is on the handle side, where as on the original, the spout is on the machine side. This means the spout on the new filter hangs too far forward and is not over the drip tray.......am I being dumb as I can't see that I can get it to turn to the machine side. Hope this makes sense without photos.....

Blue Star Coffee Replies:

Hi Darren, The spout should be facing the handle side, like the original. It is factory-tightened or glued so it may be difficult to remove it. You could insert a screwdriver into the open spout and twist it anti-clockwise. Once the spout is removed you will need to add PTFE tape to the thread, (or thread glue) and screw it back onto the required position. Contact us if you are having issues.

ALEX from United Kingdom asks

Hi, will this fit the fork that came as standard on my Mignon Specialita?

Blue Star Coffee Replies:

Hi Alex, No this will fit on the Specialta fork - the cup is too wide.

Ron from United Kingdom asks

Is the 1/2F threaded as NPT or BSP? Thanks

Blue Star Coffee Replies:

Hi Ron, it's BSP

Tomas from Ireland asks

What is the difference between this and the Crema pro ?

Blue Star Coffee Replies:

Hi Tomas, This tube has a steel reinforced base and collar, a thicker tube, an anti-fatigue knock bar and a thicker barista cloth and is made in Ireland, EU.

Yovko from Bulgaria asks

Hi, will it fit Profitec Ring group?

Blue Star Coffee Replies:

Hi Yovko, think that you would need a deeper pod basket for an E61 group - Search our search bar for " #469 " See 18mm version. It would be a more likely fit.

Eemi from Finland asks

Does this fit to Ascaso Steel with boiler? Are there any chance it could?

Blue Star Coffee Replies:

Hi Eemi, Yes fits ascaso steel with a boiler as well.

רוברט from Israel asks

hy i asume that the outer diameter is 72 iner is 56 + 8 + 8 = 72 \right? Thanx Robert

Blue Star Coffee Replies:

Hi רוברט, the correct dimensions are Ø 71.2 x 55 x 8.1 mm.

Castor from France asks

Does this item for Gaggia classic 2012?

Blue Star Coffee Replies:

Hi Castor, It fits on any vibration pump - check you have room as the pump is close to the top on a Gaggia. If there is no room - Install a 1/8" female to male elbow fitting on the pump - see related products below.

Donald from Singapore asks

Hi, Will this feet fit the steel DUO PID?

Blue Star Coffee Replies:

Hi Donald, No won't fit - you need Steel foot. Search using our search bar for " #3209" for Steel foot

Ilios from Norway asks

There seem to be two variants of this one, one like on the picture here, and another with 4 extra mounting holes. The Steel Uno PID I have requires one with 4 extra mounting holes. Which ones is this?

Blue Star Coffee Replies:

Hi LLios, This thermoblock has 4 mounting holes and 3 threaded holes for thermostats.

Romain from France asks

Hi, have you by chance measured the 58mm ? Thank you,

Blue Star Coffee Replies:

Hi Romain, The base measures 57.90mm - so a little narrow for competition baskets.

Sander from Netherlands asks

Is this basket suitable for a Breville Oracle Touch?

Blue Star Coffee Replies:

Yes, fits Breville touch

Gavriel from Israel asks

What is the total price include shipping to israel Jerusalem?

Blue Star Coffee Replies:

Hi Gavriel, Insert the item into the basket and go to check out, you should have 2 shipping options at the checkout.

Martin from Sweden asks

Hi, Is this only very similar to the generic portafilter that will fit Londinium lever (atm out of stock) or will this portafilter also fit the Londinium? Thanks!

Blue Star Coffee Replies:

Hi Martin, it's the same PF - we have put the Londoninum into stock now.

Neil from United Kingdom asks

Hi, can you supply the Stainless steel hopper bean trap cover for a Eureka coffee grinder please?

Blue Star Coffee Replies:

Hi Neil, You will receive a back-in-stock email in 3 weeks - search our search bar " #6121 "

Maria from United Kingdom asks

Hello, Does this 53mm filter basket have a manufacturer part number? If so, would you be kind enough to provide it?

Blue Star Coffee Replies:

Hi Maria, the manufacturer code is Saeco 124650221

Stan from United States asks

What type of stainless steel is this 304, 316? Is it just a screw from a hardware store or is it food grade quality?

Blue Star Coffee Replies:

Hi Stan, It is food safe 304 Stainless Steel.

pat from Ireland asks

will this foam cold milk for iced cappuccino

Blue Star Coffee Replies:

Hi Pat, Yes, suitable for cold milk as well. Froth vigorously using an up and down motion. It may be easier to use skimmed milk initially.

Leroy from Switzerland asks

hi, does the IMS shower Screen also fit the Delonghi EC885?

Blue Star Coffee Replies:

Hi Leroy, I think it does fit the Dedica Arte manual EC885, as it fits the original Dedica models. It's 50.5mm wide if you check your shower.

Rachel from Ireland asks

Hi. How do I turn off the auto function? Turned it on by accident and now it defaults to it. Thanks

Blue Star Coffee Replies:

Hi Rachel, Try powering it off by pressing the power timer button for 2 sec. It should reset itself.

Thorsten from United Kingdom asks

I was wondering if this would fit an Expobar dual leva (pre 2016) non burn steam wand ?

Blue Star Coffee Replies:

Hi Thorsten, I don't know but if you measure the inside of your steam pipe -if it measures 10mm - then this will probably fit your model.

Bledi from United States asks

I’m looking for a replacement group gasket for my Ascaso Duo machine. Would this fit? If not… what would? Thanks in advance. Bledi

Blue Star Coffee Replies:

Hi Bledi, I don't think it would fit - there are 3 duo models. Search our search bar for " #570 " and " #4922 " and " #3185 "

Michael from United Kingdom asks

Is this an M8 thread?

Blue Star Coffee Replies:

Hi Micheal, No it's 4mm thread- search our search bar for " #5568 " 8mm brass threaded handle.

Moshe from Israel asks

Is it a Normally closed Pressure Switch?

Blue Star Coffee Replies:

Hi Moche, This will remain open until the boiler reaches approximately 116c, then it will cut off supply to the boiler element.

Scott from Canada asks

Does this fit other machines, such as the Ascaso Arc (2005)?

Blue Star Coffee Replies:

No- Won't fit Ascaso models - they use a screw to hold the steam wand on - search for "#554" using our search bar.

Thomas Kwan from Hong Kong asks

The solenoid coil ZB09 , Is it use on Rancilio Silvia to take place the KP07 .

Blue Star Coffee Replies:

Hi Thomas, I think it's not suitable, but I can't say for sure - probably a different internal size. Best get the whole search our search bar for ZB09

Frederic from Canada asks

Hello, is there a way with this OPV to get 11 bar pressure? Is there a tension spring inside that can be replaced? Thanks!

Blue Star Coffee Replies:

Hi Frederic, You can replace the spring,by unscrewing the screw anticlockwise. We don't have other springs, other than what comes with this.

Paul from Australia asks

Will this fit a La Pavoni Cellini Classic? Thanks in advance.

Blue Star Coffee Replies:

Hi Paul, I don't know - it fits into 8mm pipes and is 6mm thread.

Rob from United Kingdom asks

Is this the same as the shower screen included in the converter kit for the versatile dream machines? I used that kit to convert my machine, and I don't need the whole kit again, just a new screen.

Blue Star Coffee Replies:

Hi Rob, This will fit the ascaso converter kit

Steve from United Kingdom asks

How long will this take to get to us

Blue Star Coffee Replies:

Hi Steve, The typical transit time to the UK is 1 week, depending on the method chosen.

Aaron from Australia asks

Hi there, just clarifying that 1 item = 5 strips? Thanks Aaron

Blue Star Coffee Replies:

Hi Aaron, The Price is for 1 test strip - Buy 5 or more €0.99 each | Buy 10 or more €0.79 each

Thorsten from United Kingdom asks

Hi I’m looking for a spare, short hopper for my fiorenzato all grind (56mm neck diameter). Will this fit ?

Blue Star Coffee Replies:

Hi Thorsten, this is just the lid. The Eureka hopper base is 41.7mm x 17mm deep. Search our search bar for " #5691 "

David from Portugal asks

Will the 974-9541-A fit the Sage Barista Express BES875BSS?

Blue Star Coffee Replies:

Hi David, I think it does fit - as it fits the Sage Barista Express BES860 and BES870, but I cannot be certain.

Frederico Quaresma from Brazil asks

I am going to use the ims RA200NT on a Rancilio Silvia V3. I need to know if this screw will provide a flat surface on the group. Best regards.

Blue Star Coffee Replies:

The base is flat and is not as deep as the original hexagonal nut.

Luis from United Kingdom asks

As long as this item is discontinued, may I replace it by the Brass steel shower holder i.2698? I have a ascaso versitle made in 2012. I'm already using the Ascaso Versatile To Ground Kit

Blue Star Coffee Replies:

Hi Louis, Unfortunately, it will not fit - it is thicker and is designed for the thermoblocks versions.

Glen from United Kingdom asks

Hi there. What import charges would I have to pay for a eureka mignon zero to England please. Thanks

Blue Star Coffee Replies:

Hi Glen, Royal Mail will collect 2%* Duty + £12 Royal Mail admin Fee + 20% VAT. We have the EU VAT removed already.

Philipp from Austria asks

Why does this gasket not fit models with a brass boiler? (Francis Francis X3 Ground)

Blue Star Coffee Replies:

Hi Philip, I think that the brass boilers require a different gasket. Check the dimensions of your gasket - this one is 71.5 x 54 x 4 mm.

Ryan from Australia asks

Hi what one will fit breville bambino 54mm thanks.

Blue Star Coffee Replies:

Hi Ryan, No - it is not suitable for 54mm, as it is for 58mm portafilters.We don't have pod baskets for Breville Bambino.

Guy from Israel asks

Hi, I have an original 18 gr Lelit basket, will it fit? Another question, to which direction do the spouts turning? Left & Right or forward backward? Thanks

Blue Star Coffee Replies:

Hi Guy, The Depth inside the portafilter is 29mm -If using a triple basket, it should be no deeper than 29mm, as the portafilter is tapered at the base. Spouts are facing left to right - see new images.

Poh Kee Tan from Singapore asks

Does the Mazzer burrs 233M fit the DF64 Gen2?

Blue Star Coffee Replies:

Hi Poh Kee, It fits the DF64 Turin Gen 1, Gen 2

Diego from Spain asks

Hi, Is this a pressurized basket? I’ve been reading and it looks like ESE pods only work with pressurized ones. I intend to use it on a Hibrew H10A. Thanks!

Blue Star Coffee Replies:

Hi Diego, This is not a pressurised basket. It is for ESE coffee pods only. I dont know if it fits a Hibrew machine.

Pete from United Kingdom asks

Hi will these fit EUREKA MDMCA Thank you Pete

Blue Star Coffee Replies:

Hi Pete, No, it won't fit MDCA, you need " Eureka Atom OEM Blades 64mm ". Search our search bar for " #5679 "

Sinead from Ireland asks

Is this uitable for a Rancillo portafilter

Blue Star Coffee Replies:

Yes, should fit fine - the hole in the centre is 29mm wide, so will accommodate most 3/8" double spouts.

Sh from Kuwait asks

I’m a bit confused what the difference between ( EU plug)option and (EU+uk adaptor) option

Blue Star Coffee Replies:

Hi Shreifah, This grinder comes with the EU plug. If you want to use it in the UK, we have provided an EU to UK 13amp adaptor as an option.

Scott from United Kingdom asks

Will i have to pay vat for delivery to Scotland?

Blue Star Coffee Replies:

Yes - you will have to pay import tax. If the order total is above £135 20% UK VAT + duty is payable - | (Royal Mail will collect 2.5% Duty approx +12£ admin fee +20% UK VAT).

Yovko from Bulgaria asks

Hi, do you offer also 55mm Eureka Diamond Inside burrs?

Blue Star Coffee Replies:

Hi Yovko, At present we don't carry it.

Yovko from Bulgaria asks

Will this fit 55mm Oro Mignons like Dolce Vita, etc.?

Blue Star Coffee Replies:

Hi Yovko, The Dolce Vita uses Pure Diamond burrs (55 mm), so it probably does fit, but cannot confirm.

Emanuel from Switzerland asks

Hello, could you please advise the expected delivery date for this part to Switzerland? Thank you!

Blue Star Coffee Replies:

Once it has shipped - approx 1 week to Switzerland.

Michael from United Kingdom asks

Hi, does it fit a basket that is 26mm in height? Description says the basket it comes with is an 18gr 24mm. Thank you

Blue Star Coffee Replies:

Hi Micheal, It accepts our 26mm basket but won't take the 28mm basket.

Paul from United Kingdom asks

Hi, is the handle removable and if so, what’s the diameter of the thread?

Blue Star Coffee Replies:

Hi Paul, Its thread is 12mm (M12) and is removable - also comes with a non-removable PVC handle. Insert into our search bar - Londinium Generic Naked

Saar from Israel asks

Hi. I'm thinking to buy it but the shipping costs are very high. Can I please get a discount or voucher code?

Blue Star Coffee Replies:

We can send it by untracked mail for 6€ - so it's a little cheaper.

Ruan from Ireland asks

Are these thermostats suitable for Gaggia Bean to Cup Titanium? My steam and hot water are working ok - producing hot, but my brew/coffee is cold. I think I need a new thermostat.

Blue Star Coffee Replies:

Hi Ruan, these won't fit Titanium, they use a Klixon thermostat (held with a clip). As far as I can tell they are 175°C. We don't have that one.

Christina from Sweden asks

Does this work with the Astoria Luna espresso machine (the wall

Blue Star Coffee Replies:

Hi Christina, We have no data on Astoria Luna, so I don't know if it will fit - probably not.

George from Cyprus asks

Hey what’s the roast date ?

Blue Star Coffee Replies:

The Kafequo roast date is 12/23

Jesper Dyhr from Denmark asks

I need a new hot water valve for my SES990 230V Is this the right part?

Blue Star Coffee Replies:

Hi Jesper, I think you need the Dual boiler solenoid - search our search bar for " Solenoid Valve 9000Bhs 230V "

John from Cyprus asks

Will this fit a profitec? it shows both M8 and M8.5 in the item title and description

Blue Star Coffee Replies:

Hi John, I cannot confirm, if it will fit a Profitec model - very similar thread size, but the internal hole for Teflon pipe may be too narrow.

John from Cyprus asks

Do you sell the stock opv spring?

Blue Star Coffee Replies:

Hi John, We don't sell it separately. However insert Gaggia Classic pro-OPV in our search bar for the original OPV - the spring comes with that part.

Julie Wyness from United Kingdom asks

Morning I have a Sage Barista Express BES870. I need to replace the solenoid on the right (as you face the back of the machine once open). It says its 2 bar. If I could possible send you a picture you could advise if this solenoid is the correct one to purchase. Thank you. Julie

Blue Star Coffee Replies:

Hi Julie, this fits the BES870, is 2 bars and sits on the right. See new images.

Aleksandar from Serbia asks

What is the flow rate for this pump?

Blue Star Coffee Replies:

Hi Aleksandar, Approx 300 cc per min at 9 bars - download our specifications on this page for more information.

André from Sweden asks

Is this item polished as in the pictures or brushed as in the description? I would like the polished version.

Blue Star Coffee Replies:

Hi Andre, This has the mirror finish - so is shiny.

python from Switzerland asks

it works for a Gaggia 2019 NL 9206AD - 4 Drachten ?

Blue Star Coffee Replies:

Hi Python, If your model is a Gaggia Classic and has the aluminium boiler - then it should fit. Check your dimensions to be sure. This is 72mm x 57mm x 8.5mm.

David from France asks

Hello, is it better than the original please?

Blue Star Coffee Replies:

Hi David, This is made by IMS - so the quality is good, it is different from standard showers as there is a 6mm gap around the edges, where there are no holes.

André from Sweden asks

Is this fully produced and made in Italy? What brand is making this handle?

Blue Star Coffee Replies:

Hi Andre, This is tooled in Italy from Italian walnut. Threaded core is also made in Italy. It is unbranded.

Tina from New Zealand asks

Hi, will the black gasket fit an Nnova Dream? It has the same ports filter handle from what I can see. Also, how thick is the gasket? 7mm?

Blue Star Coffee Replies:

Hi Tina, this includes the older (i.57) 5mm gasket for models made 09 2012. You may need the thicker 8.5mm gasket - search our search bar for i.2281

Julain from Switzerland asks

What's the amp rating of this thermostat please?

Blue Star Coffee Replies:

Hi Julian, 13 amp - 110- 240 volts.

Julian from Switzerland asks

What is the amp rating of this thermostat please?

Blue Star Coffee Replies:

Hi Julian, 13 amp - 110- 240 volts.

Vanessa from United Kingdom asks

Will this fit Nouva Simonelli MDX on demand?

Blue Star Coffee Replies:

Hi Vanessa, No won't fit - Its dimensions are the same but Nuova Simonelli MDX on-demand uses Right-hand rotation.

Paul from Canada asks

If I change this pump will it also fix the low steam pressure I’m having

Blue Star Coffee Replies:

Hi Paul, Changing the pump will not affect the steam - so no.

Therese from Ireland asks

Hi -does this coffee need to be made in a coffee machine or xan you just grind the beans & pour (just under boiled) water & leave to brew? Thank you

Blue Star Coffee Replies:

These are beans, so you will have to grind them. It makes lovely filter coffee if you have a hand or electric grinder.

Sarita from United Kingdom asks

Please can you tell me what decaffeinating process you use. Thank you Sarita Ormrod

Blue Star Coffee Replies:

Hi Sarita, While it is both Organic and Fairtrade - it uses the traditional method of decaffeination namely chemical solvents

Roo from Netherlands asks

Hi, As I read online somewhere, is it correct that this portofilter also fit on a Expobar brewtus 4?

Blue Star Coffee Replies:

Hi Roo, Search our search bar for Expobar Crem Bottomless - that will fit Brewtus.

Steve from Portugal asks

Compatible for pre 200 la pavoni europiccola?

Blue Star Coffee Replies:

Hi Steve, Search using our search bar for " ims pavoni old " . This is for E61 group models.

Nikitas from United Kingdom asks

Can you provide the data sheet for this?

Blue Star Coffee Replies:

Hi Nikitas, See data sheet here https://www.tierrefittings.it/upload/categoria/INRA/OTR/IMG_01.pdf

Stephen from Ireland asks

Just enquiring if/when you expect to have these back in stock?

Blue Star Coffee Replies:

Hi Stephen, This is due back mid-Sept - 2 weeks approx

Mathias from Germany asks

Will the handle lock in to a straight 90 degrees position with a VST basket? because the bottomless filter i have just now has wider brackets and locks in almost immediately and does not feel secure.

Blue Star Coffee Replies:

Hi Mathias, It should fit at 6 o'clock, when the machine is new. When older you may have to add paper shim to make the gasket thicker, otherwise, it would fit at 5 O'clock.

Nicki from United Kingdom asks

Hi I have a haggis classic 2019 is this the right solenoid for this machine thanks

Blue Star Coffee Replies:

If you have an aluminium boiler - then it will fit your model.

Nurit from United States asks

Does this have a production or expiration date? I read they expire within 18 months. I only intend to use it in 2 months and am wondering if I should buy it now or in 2 months. Thank you. Nurit Levitas

Blue Star Coffee Replies:

Hi Nurit, The production date is 25/03/2024 and should be good for up to 2 years.

Erica from United States asks

I want to know if this will fit the double portafilter on Saeco Espresso Classico from year 2000?

Blue Star Coffee Replies:

Hi Erica, it fits Saeco Classico selecta, so probably does - measure to make sure . 25mm deep x 53mm Width (60mm inc rim)

Erica from United States asks

Will it fit Saeco Espresso Classico?

Blue Star Coffee Replies:

Hi Erica, I think it does - but measure to make sure. 55 mm x 10mm

PJ from United States asks

What is the volume capacity of the french press in liters?

Blue Star Coffee Replies:

Hi PJ, Its capacity is 1L (34oz) - makes approx 3-4 8 oz cups.

Ray from Canada asks

Does it work with delonghi stilosa?

Blue Star Coffee Replies:

Hi Ray, It does, but you would need to change the screw - see the Reddit link in the fits section.

Marco from Switzerland asks

Hi, ist dieser Thermostat auch für eine Quick Mill Carola geeignet? Falls nicht, habt ihr einen passenden für dieses Modell? Danke und freundliche Grüsse Marco

Blue Star Coffee Replies:

is this thermostat also suitable for a Quick Mill Carola? If not, do you have a suitable one for this model? Hi Marco, I don't know. I think that QM use a 160C Klixon thermostat (Does not screw onto the boiler). Remove your thermostat - the rating is usually etched underneath or on the side.

Bret from Canada asks

Will this fit pre 2006 i1 grinder (49mm burr machine)? You say it fitsi1/i2 but not if pre 2006. Thanks much!

Blue Star Coffee Replies:

Hi Bret, It should fit ascaso i1 grinders, to make sure, measure the opening -this is 33mm in diameter.

Jon from Canada asks

Does this spring fit Millennium (51mm) models, pre-Millennium (49mm), or fits both?

Blue Star Coffee Replies:

Hi Jon, It should fit both baskets 49mm and 51mm.

Philip from Canada asks

In some models, the basket can be removed. I'm just wondering if the basket can be replaced with an 18g bottomless basket (always make 2 shots)?

Blue Star Coffee Replies:

Hi Philip, No problem removing the basket - it includes the deepest basket (28mm in height) so should accommodate yours.

Ben from United States asks

I would to use this portafilter to pressure test my Silvia. Can you loosen out the double spout, I do not have the tools to do this.

Blue Star Coffee Replies:

Hi Ben, The spout is either factory-tightened or glued. It can be removed but not easily. Typically immersed into boiling water for 5 min to loosen the glue or expand the metal.

Marco from United Kingdom asks

Hi, I see many of these same temp meters on aliexpress for a fraction of cost. What differentiates these? Any authenticity or just markup on your side?

Blue Star Coffee Replies:

Hi Marco, Coffee Sensor in Romania designed and manufactured the E61 digital thermometer many years ago and has many imitators but few equals. They are well-engineered, tested and proven to work. I cannot speak for Aliexpress, but we have been selling these E61 digital thermometers for many years without any issues.

Dror from Israel asks

Hi hello, I want to know if this part fits my machine which is PL042TEMDAUS thank you

Blue Star Coffee Replies:

Hi Dhor, Yes it fits Lelit Anita PL042TEMD

STAN from United Kingdom asks

I have a Profitec 400 pro, I can turn off my pre infusion, so doI still need to fit the bottom spring

Blue Star Coffee Replies:

Hi Stan, The spring is to cancel preinfusion, it's optional so you may not need to use it.

Sophie from Canada asks

Do you think this product will fit on my old Mokita super combi ? Thanks for your support.

Blue Star Coffee Replies:

Hi Sophie, I think that Mokita super combi is a rebranded Lelit Anita PL42, so it probably does fit - not certain though.

Robert from United Kingdom asks

Hi. Will this fit Gaggia Classic RI9403? My model is RI9403/18 & struggling to find shower head assembly with upgraded screen that will fit. Many thanks, Rob.

Blue Star Coffee Replies:

If your version has an aluminium boiler - then it will fit. If your version has the stainless steel boiler (Gaggia Classic V2 2015 RI9403 ) - then it will not fit. If your version is produced after 2019 and has the aluminium boiler - it comes already with a stainless steel shower holder - so you will only need the screen or gasket

Tho from Australia asks

Does this fit the classic evo pro 2023? Want to remove the existing one due to flaking.

Blue Star Coffee Replies:

Ho Tho, Yes it fits Classic 2023 and is non-coated aluminium.

Mick from United Kingdom asks

Does this basket fit a Rancilio Silvia?

Blue Star Coffee Replies:

Hi Mick, Yes it fits Rancilio Silvia.

Steve from United Kingdom asks

I am interested in the La Pavoni 51mm bottomless portafilter. Is the portafilter manufactured by the same supplier as Coffee Sensor? It’s looks good. Thank you Steve

Blue Star Coffee Replies:

Hi Steve, Yes it is made by Coffee sensor.

Bridget from United Kingdom asks

Are these safe to put in the dishwasher?

Blue Star Coffee Replies:

Hi Bridget, Yes, they are safe to put into a dishwasher.

Ryan from Switzerland asks

I have a La Pavoni Grand Cafe GCM, could you assist me in what Gasket kit is compatible for this machine as I would like to overhaul the unit. If you could provide a link to which item to purchase please to help

Blue Star Coffee Replies:

Hi Ryan, We don't have a kit for your model. You can a list of spare parts for that model - https://www.bluestarcoffee.eu/en/Lelit-Anna-spare-parts-PL041-EM/cpl-16.aspx

David from United Kingdom asks

Hi, My Gaggia Classic (bought in about year 2000) doesn’t have any water coming out of the brewhead. The wand is working fine. In the past I have resolved this by disassembling and descaling the boiler and brew head. This time I also took apart and cleaned the solenoid valve, but, it still didn’t work. Just before it stopped working there was a new clicking sound coming from the machine, which I have never had before. Please can you tell me what could be the problem/solution?

Blue Star Coffee Replies:

Hi David, The group is probably blocked by mineral deposits. When there is a build-up, it can block the solenoid after a time. You need to remove the group, separate the boiler and immerse the group in a descaling solution. Then insert a brush or thin metal into the group to remove any remaining build-up. You will need a new boiler gasket and possibly a new solenoid.

Noël from Switzerland asks

Hi guys Does this fit the Rocket Fausto grinder? Thanks

Blue Star Coffee Replies:

Hi Noel, As far as I can tell, the Faustio is 50mm. Insert " Mignon Flat Blades OEM 50mm " into our search bar to find it.

Benjamin Edelstein from Netherlands asks

Hello Blue Star coffee employees, Does this fit a La Cimbali junior m20 s1? Thank you very much for your efforts. Greeting, Benjamin Edelstein

Blue Star Coffee Replies:

Hi Benjamin, No - It won't fit La Cimbali models - we have a chrome-plated Cimbali naked PF - search our search bar for " La Cimbali Portafilter "

Firat from Turkey asks

Hi. I would like to know if this product is food safe. I am concerned that it will contaminate the water.

Blue Star Coffee Replies:

Hi Firat, As this is thread locker glue - it does not come in contact with the water. That said - it does not come with come with EU certification. We use it on portafilter spouts, solenoids and boiler fittings.

Garmon from United Kingdom asks

Hi, do you know when you expect to have more in stock?

Blue Star Coffee Replies:

Hi Garmon, due back mid Oct/24

Filippo from United Kingdom asks

Just to confirm this will fit a Gaggia classic! 2006 model

Blue Star Coffee Replies:

Hi Flippo, It is not available for until Jan 25, we will have more information then. As far as I can tell its the same boiler, but brass and slightly larger.

Serg from Serbia asks

Does it fit to Gaggia Classic Evo Pro RI9481?

Blue Star Coffee Replies:

Hi Serg, If it has an aluminium boiler, then it will fit, your model.

Sam from Switzerland asks

Does this fit for Quickmill 0981?

Blue Star Coffee Replies:

Hi Sam, Too early to say, as it is a new product - but if you measure your existing mushroom and compare it with the dimensions shown in the image, you will be better informed. You will need 53mm clearance as the knob is big.

Alexandre from France asks

Bonjour, Cette résistance est compatible avec une Rancilio Silva V5 en 220V ? Merci

Blue Star Coffee Replies:

Hi Alexandre, Yes this fits Silvia V5 - but this one is 110V - you need 230V - Search for #3050 on our site.

Attila from Netherlands asks

Hello, Is this portafilter also suitable for Rancilio Silvia? Thanks

Blue Star Coffee Replies:

Hi Attila, No not suitable for Rancilio - search for " #4975 " (Portafilter Pressure Gauge) - this is the same gauge and can be added to the existing Rancilio portafilter.

Kasper from Denmark asks

Hello I was just about to order 2 pieces of this product, when I noticed you only have 1 left in stock. How quickly can you restock this product, then I will wait placing my order, to avoid 2 times delivery charges to Denmark. Thank you. Best regards Kasper

Blue Star Coffee Replies:

Hi Kasper, We only have one in stock - reorder times would be 8 weeks approx. This has gone up in price - old price had not been adjusted.

Gary from United Kingdom asks

Will this fit a breville barista mini vcf125

Blue Star Coffee Replies:

Hi Gary, we don't have any data on that model - suspect that it may use the 50mm gasket, which we don't carry.

Tom from United Kingdom asks

The vibratory ULKA pump on my Gaggia Classic has the resettable thermal fuse missing (I am unsure if it came like that from the factory or if a previous owner removed it). Would this thermal fuse fit that pump?

Blue Star Coffee Replies:

Hi Tom, I don't know if the Classics came with a fuse or not. You can use this fuse on any Ulka pump and is easy to fit.

James wheeler from United Kingdom asks

Hi is this a direct replacement for my 1997 machine? Cheers

Blue Star Coffee Replies:

Hi James, If you have a Gaggia classic - this will fit or if you had the Orignal CEME 588 solenoid.

John from United Kingdom asks

Do you stock the 54mm baskets?

Blue Star Coffee Replies:

Hi John, IMS BIG BANG B62.52TFH should be available in Nov/Dec approx. They would fit Breville/Sage, and Solis 54mm models.

Yury from United States asks

Hello, Will it work in the USA? Thank you.

Blue Star Coffee Replies:

Hi Yuri, No, not suitable for USA, you would need 110V - this is 230V.

Daan from Netherlands asks

What is the diameter of the bottom of the pot?

Blue Star Coffee Replies:

Hi Daan, Base diameter of 10cm/3.9in.

Thanasis from Greece asks

Hi does it fit the gaggia classic 2012 model?

Blue Star Coffee Replies:

Hi Thanasis, if you have the aluminum shower holder - then this will fit, as they are the same size. See the image in the description for the old aluminum shower holder.

Galina from Greece asks

What are the right dimensions: on the photo or in the written description? If it is in the written description I think it will fit my Alessi Coban espresso machine

Blue Star Coffee Replies:

Hi Galina, well spotted - the drawing dimensions are correct 56.4mm outside and 55.4 inside, 3.2mm height, and 3mm hole for the screw.

Oliver from United States asks

Hi, what is the difference between this and the original one?

Blue Star Coffee Replies:

Hi Oliver, The generic portafilter body and spout are made from chrome-coated brass, the original is made from stainless steel and had slightly thinner 6mm fins. The generic version comes with a double generic basket.

Rimtas from Denmark asks

Would it fit a Profitec 700? Or an Izzo Alex Duetto II? Kind regards Rimtas

Blue Star Coffee Replies:

Hi Rimas, don't think it would fit - maybe a 10mm nozzle? See our selection of M10 nozzles under Parts - Steam wand.

Alex from United Kingdom asks

Hi, I see this portafilter has slightly different size compared to Lelit PLA58 Walnut Naked Portafilter generic sold on your site as well. What are the differences? Will both fit Lelit Elizabeth and which one would be a better fit/quality?

Blue Star Coffee Replies:

Hi Alex, The SS PF is an E61 type so 2mm thicker fins, it has a deeper 18/21g basket and the body is made from Stainless steel. Would not be a good for a new Lelit model as PF would sit at 5 o Clock.

Joey Cheng from United States asks

Will this fit an Isomac Millennial machine? Thanks!

Blue Star Coffee Replies:

Hi Joey, The steam/water knobs on this set are 7mmx7mm, and the Isomac knobs are 6mmx6mm. Search for components separately see " #4660 " " #5568 " " #3506 "

Tom from Australia asks

Hi, will fit the older 1/2 version Silvias with the flaky chrome?

Blue Star Coffee Replies:

Hi Tom, Yes Fits V1 & V2, as well as V3,V4,V5 and V6

Vincent from Ireland asks

Do you have this grinder in stock? If no, what is the lead time to get it in?

Blue Star Coffee Replies:

Hi Vincent, It's due back into stock end of Oct/23.

Tom Fisher from United Kingdom asks

I’ve just bought this and neither of my 51mm tampers fit properly inside the basket? Because it’s like a a slight cone, the tampers only just fit in the top then won’t push down properly? Is this a fault or do I need a 50mm tamper??

Blue Star Coffee Replies:

Hi Tom, We have tested this on our #3315 tamper and it fits - however as the basket is cone-shaped - it will not go down very far. The Joe Frex #5003 is a better fit, goes down halfway. A 50mm tamper will go all the way down but will be loose on the top.

Nick from Germany asks

Hi, I own a Elektra Nivola and I want to know, whether this filter basket fits. My tamper is a 57mm Model, my actual filter is 64mm wide and 22mm high, so I think it would match. Can you please confirm? Kind regards Nick

Blue Star Coffee Replies:

Hi Nick, It may fit, as the dimensions are very close, but I cannot say for certain. No problem to return if it does not fit: Height 20.8 mm | Width edge 64.2mm | Internal width 57.3 mm

Rory from Ireland asks

Hi there. Will this fit a ROK? I've read a rok will take a 51mm ims basket. Will it take the triple shot one? A rok can take about 21gs of coffee. Thanks lads.

Blue Star Coffee Replies:

Hi Rory, You may be able to use the B602TH25N (Search #5519). A Reddit user had success with it - see link of fits models tab.

Juan from Japan asks

Will this basket fit the De'Longhi ECP3420?

Blue Star Coffee Replies:

Hi Juan, It probably does fit as your model accepts a 51mm tamper - but I cannot be certain - Measure your old one to make sure Dimensions: Edge D.61.5mm, Inside D.51.5mm Body 52.5mm

Sean from United Kingdom asks

Do you think you will ever get these back in stock?

Blue Star Coffee Replies:

Hi Sean, Factory just reopened - so should have back in 2/3 weeks.

Stephen from United Kingdom asks

Hi there, Do I have to replace the whole meter ? or can I get away with replacing the top ? I am getting no response the coffee buttton.

Blue Star Coffee Replies:

Hi Stephan, Yes, it's okay to replace the top, you should replace the impeller and o ring as well. It is a much quicker fix and should restore the volumetric button. See #5851 for the kit.

Paul from Germany asks

I would like to order the espresso sampler, can you tell me when the beans were roasted?

Blue Star Coffee Replies:

Hi Paul, these were roasted in December.

Cedric from Norway asks

How do you remove the handle to replace it with another one? I tried to twist it, but it's super tight.

Blue Star Coffee Replies:

Hi Cedric, I think that it is glued, so immerse the metal body in boiling water for 5 min. Do this 1-2 times. It will loosen the glue or expand the metal so it will screw off.

Alex from United Kingdom asks

Hi, I have a sage barista express, but the 2 ways solenoid is series 588. Would it be compatiable with the 558? Thanks

Blue Star Coffee Replies:

Hi Alex, This 558 fits Barista Express BES870, BES870XL, BES878, and BES883, so should be ok for your model.

Sondre from Norway asks

Does it fit the standard rocket appartemento 58mm portafilter?

Blue Star Coffee Replies:

Hi Sondre, Yes - Fits and E61 portafilter including Rocket.

Cmed radiology pvt Ltd from India asks

Letron Chillar pump with capling

Blue Star Coffee Replies:

Hi Sharma, This comes with a clasp and is suitable for 2 group coffee machines.

Kenya from Japan asks

Can you tell me the height and width?

Blue Star Coffee Replies:

Hi Kenya, Width: 48mm | Thread: 3/8" | Height: 23mm

Estela from Spain asks

Can this P/N fits models after 2008? My Europiccola EN is from 2017. The LaPavoni spare part number for my model says is this, the P/N 2612005. Thanks

Blue Star Coffee Replies:

Hi Estela, The product code for this is the same 2612005 and it fits models made before 2000. So Yes - it should fit 2017 models.

Aisling from Ireland asks

Is this canister also good for storing ground coffee?

Blue Star Coffee Replies:

Hi Aisling, Yes - Ground or beans - It works by expelling the air that would normally oxidise the coffee. No air = fresh coffee.

Tom from Australia asks

Will this service kit work with an NS Oscar II? Thanks, Tom

Blue Star Coffee Replies:

Hi Tom, It does fit the old models and I would expect it fits new versions also - but cannot be certain.

Ulf from Sweden asks

Hi, Does this nozzle fit La Pavoni Cellini Mini? Best Regards Ulf

Blue Star Coffee Replies:

Hi Ulf, I cannot confirm - measure your steam pipe - if it 10mm inside then it should fit.

Martin from United Kingdom asks

Hello Will this fit the Oscar 2 machine? Thanks

Blue Star Coffee Replies:

Hi Martin, I would expect that it does fit as it fits the Oscar 1 - if unsure measure your fins - this is 6.5mm thick.

Amir from Israel asks

Will this fit as an upgrade to a 3/2015 ascaso basic thermoblock version?

Blue Star Coffee Replies:

Hi Amir, No - this is just to replace the existing valve only. Search for using our search bar for " #5613 " . Check that there is space inside the machine for this OPV.

Mokhtar from Saudi Arabia asks

Hello, What is the compatible portafilter for La Spaziale S5 TA EK2? What's the size?

Blue Star Coffee Replies:

Hi Mokhtar, La Spaziale use 53mm portafilters and 53.5mm for IMS Spaziale baskets - see accessories tab on this page.

Ludovic from France asks

Hello, I have just received this switch to install on a Europiccola v2.3 to replace a white double switch. When I connect it to the same switch as the white one, it doesn't work. Can you tell me how to connect it? Best regards, Ludovic

Blue Star Coffee Replies:

Hi Ludovic, We don't have electrical specifications, so I cannot advise where the wires go. If you think the switch may be faulty we can send you another one.

Jarad from United States asks

Hello, could I fit one of these in line on a 2006 Ascaso Dream?

Blue Star Coffee Replies:

Hi Jarad, Yes this will fit Dream with the boiler and thermoblock

Fabien from France asks

Bonjour Je vois qu'il est de taille M5. Il est donc adapté au moulin Mazzer Super Jolly ? Cordialement

Blue Star Coffee Replies:

Hi Fabien, both pins are 5mm - so it does fit Mazzer, but it is shorter than Orignal Mazzer - search " #5317 " for the Mazzer pin.

David from United Kingdom asks

My old CEME coil burned out in my Gaggia Classic - it had 3 terminals, though the ground one at the bottom was not connected to anything. Which way do the wires go? Does this new one have 3 terminals? (not easy to see from the pictures) Thanks

Blue Star Coffee Replies:

Hi David, Yes it has 3 terminals, 1 for earth and neutral and live. Connect the earth to the bottom terminal. The other terminals can be mixed.

Adi Zvi from Israel asks

Would it fits Bellezza Valentina?

Blue Star Coffee Replies:

Hi Adi, We have no data on Bellezza, so cannot say, if it would fit or not.

Johannes from Switzerland asks

Hi, can the spout be removed? What size is the threading?

Blue Star Coffee Replies:

Hi Johannes, No the spout is glued. Thread is standard 3/8"

Jon from Ireland asks

Hi, Would this also fit a Delonghi La Specialista Arte? Many thanks

Blue Star Coffee Replies:

Hi Jon, It fits La Specialista Maestroso probably, but not certain

Francisco from Finland asks

Hi; Do you know if the 26.5mm height basket fits in a rancilio Silvia v2 portafilter (20-112-010)? Thanks

Blue Star Coffee Replies:

Hi Francisco, The original Rancilio basket is ridged, 21mm x 70mm x58mm. This basket is a little deeper 24/26.5mm x 70mmx60.5mm. So yes - it will fit Rancilio models.

Yani Yanakiev from Bulgaria asks

Hi,lovely Bluestar Team,i am a beginner in the hobby 🙂😇and i have some questions about a few products.Please help me before i make an order! Please explane the best possible and correct way to install this VBM Pump Gauge! I have an old Brasilia Club/Lady with single boiler. I want to install a Vibiemme OPV with all suggested fittings and this manometer! I think i can install the OPV,but where schould be the manometer installed? I would like to be somehow between the boiler and may be the solenoid valve... Is that the correct place ,'cause i want to check the real pressure in the brewgroup durring extraction? Thanks in advance

Blue Star Coffee Replies:

Hi Yani, I cannot advise you as we have no experience with this modification. It is a 1/8" fitting so some of our fittings may fit this gauge. Search "1/8 fitting" in our search bar. Maybe a T-fitting + Elbow fitting?

Ollie from United Kingdom asks

Hi - I’m needing to replace a CEME 3-way v393vn25paif in a sage BNE600 - would this item (v397vn25paif) be cross-compatible?

Blue Star Coffee Replies:

Hi Ollie, they are similar, both are 0.1-2 bars, but this valve has a 1/8 " fitting, yours has a push-on/clip PVC fitting. You may be able to replace the PVC fitting with our Fitting 1/8F x 1/8F + Push fitting 1/8 x 4mm. Not certain, it would be your risk - but probably would fit.

Timur from Canada asks

Hey guys, does that solenoid should be replaced on Ascaso Dream PID (2018) if the over-pressure during manual back-flushing drops down only after manually opening of hot water faucet? It also doesn't give me the chance to adjust the pressure spring which that machine can do. Thank you

Blue Star Coffee Replies:

Hi Timur, - If this valve failed, you would have no coffee. - The pressure will drop if you open the water tap on the Uno and dream PID. - The OPV is controlled by the internal spring, which is adjusted by turning the screw.

Zoran from Serbia asks

Hi, will it fit to Dedica 685? I have bought aftermarket bottomless portafilter.

Blue Star Coffee Replies:

Hi Zoran, Yes - It fits the Delonghi Dedica EC680 and EC685

Hardeep singh from Finland asks

Hello. I have ascaso dream 09/2011 does this setup fit for machine? Regards. Hardeep

Blue Star Coffee Replies:

Hi Hardeep, It fits Ascaso Dream: Ground version models: made before 09/2012.

Colin from Ireland asks

Hello,toying with The idea if fitting this to a rancilio Silvia. Would it be close? Changing pipe thread sizez would not be a problem. Thanks

Blue Star Coffee Replies:

Hi Colin, The steam wand will fit the lower part, but the Rancilio fitting is male and this is female, so you would need a fitting. So in theory it is possible.

miro from Ireland asks

Is this cool-touch double wall pipe?

Blue Star Coffee Replies:

Hi Miro, This is not cool-touch. That version will be available soon.

Fredrik from Sweden asks

I have a Sage the Oracle and have leakage from the probes related to the blue gaskets. Will this be the right gasket for this machine?

Blue Star Coffee Replies:

Hi Fredrik, Yes fits Breville Sage Oracle: BES980XL, BES980 , BES980BKS and Breville Sage Oracle touch: BES990BSSUSC, BES990BSS, BES990BTR

Tomasz from Poland asks

Is it a high flow basket like ims the single, requiring finer grind?

Blue Star Coffee Replies:

Hi Tomasz, you will have a grind change with all competition baskets as the holes are smaller, uniform and more of them.If you all ready have a competition basket then your grind should not change.

Sergio from Spain asks

Can this unit and the brass boiler be used on a 2003 Gaggia Classic?

Blue Star Coffee Replies:

Hi Sergio, This will fit the brass boiler, and will replace the older group for the classic.

Obigraf from Ireland asks

Hi, That pipe exploded on my machine. I have no steam leaks or escapes, but as soon as I switch on the steam switch (the one on left) pulsating noises and vibrations appear and if I don't release the steam valve (even though steam is not ready) pipe bursts. I got the kit from you before, all is replaced but I don't use the steam.

Blue Star Coffee Replies:

Hi Obigraf, I could not find your order, but it should not do that. I suspect that the nut-holding the PTFE pipe is not fully tightened. Steam should cause the pulsating, this is normal. In any case we have spare pipes. Contact customerservice@bluestarcoffee.eu , if you need one .

Matt from United Kingdom asks

The description suggests that some modification is required for installation on a Gaggia Classic. What sort of modification is required?

Blue Star Coffee Replies:

We have a video on how to install this wand on a Gaggia classic , in the tab titled video.- See below or https://youtu.be/H5laAiLnxT0

Heath from United States asks

I'm looking for a CEME V393VN25PR44 Can I purchase this partvfrom Blue Star?

Blue Star Coffee Replies:

Hi Heath, I think that this V397VN25PR44 valve is the same as V393VN25PR44 - both do the same function.

Jo from Korea Republic of asks

My machine is 51mm only, will this tool work as well?

Blue Star Coffee Replies:

Hi Joe, No it will not fit 51mm, as it is too wide for the group.

Joseph from United States asks

Does this switch have an led? And will it work for any of the gaggia switches?

Blue Star Coffee Replies:

Hi Joseph, No it does not have a LED and will fit Gaggia Classic Pro models - see list of compatible models.

Mark from Canada asks

Will this valve fit Lelit Elizabeth V3 (PL92T)?

Blue Star Coffee Replies:

Hi Mark, It should fit your version as well. If your model has the silicon hose attached to the valve - it will fit.

Murat from Turkey asks

Hello, Ascaso is not listed as compatible brand on the list. Does this one fit to the portafilter of Ascaso Baby T Plus?

Blue Star Coffee Replies:

Hi Murat, Yes -it will fit - check that you can remove the existing spout.

Jinbo from Italy asks

Hello there, is this screw the original by "La Marzocco"? Thank you, J.

Blue Star Coffee Replies:

Hi Jinbo, this is a generic - not original La Marzocco screw. The only difference is the original screw has the holes lower down the screw.

Martin from Switzerland asks

What is the difference between this one and another very similar one (https://www.bluestarcoffee.eu/Mobile/en/Ascaso-Bottomless-Portafilter-Walnut-58mm/m-m-5043.aspx)?

Blue Star Coffee Replies:

Hi Martin, Only the body is different - handle is inclined, (point downward)> They both fit the same and have the same basket.

Shafique from Singapore asks

Just to confirm if this id a single spout?

Blue Star Coffee Replies:

Yes, this has a single spout and + a single basket.

Liva from Norway asks

Hi, will this steaming wand also fit the la Pavoni Eurobar EBR model?

Blue Star Coffee Replies:

Hi Liva, No it won't fit Eurobar - similar but not the same.

Shafique from Singapore asks

Would it fit an 18 or 21g basket?

Blue Star Coffee Replies:

Hi Shafique, Yes both the double and single can take 18g and 21g baskets.

Marko from Croatia asks

Will this fit Quickmill portafilters? Thank you

Blue Star Coffee Replies:

Hi Marko, It fits the E61 Quickmill models - but not the Lever models. The diameter is 77mm wide, if need to confirm.

Alexander from Iceland asks

What's the screw's head height?

Blue Star Coffee Replies:

Hi Alexander, The Thread is 5mm x 12mm and the Head is 10mm wide x 4mm height

Anders from Denmark asks

Does the fitting for gaggia classic follow with the steamer?

Blue Star Coffee Replies:

Hi Anders, In order to install this on a Gaggia Classic - you have to remove the steam wand nut on the new steam wand and exchange with the male nut on existing steam wand. See the video in the tab.

JOHN from Greece asks

can you show a video for replacement ?

Blue Star Coffee Replies:

Hi John, We don't have a video for this part.

Erik from Portugal asks

Hello, I want to buy two of these portafilters and I want to buy a tamper that fits them as well. Can you please tell me what tamper diameter will best fit this portafilter.

Blue Star Coffee Replies:

Hi Erik, This basket will accept both 58mm and 58.5mm tampers.

Aaron from Portugal asks

Besides shipping cost of 46 Euro, what other fees should I expect to pay to import this to Portugal? Will it work in Portugal?

Blue Star Coffee Replies:

Hi Aaron, Ireland and Portugal are both in the EU, so no extra taxes are applied. The price quoted is what you pay. 230V is the correct voltage for the EU area.

Michael from Germany asks

Hello, Will this display also work for the 110V version of the Ascaso Steel Duo? Thank you

Blue Star Coffee Replies:

Hi Michael, It will fit both the 230V and 110V.

Andy from United Kingdom asks

Hi. I am looking for a replacement on/off light for an Ascaso Steel PID, which one would it be, do they come with fitting instructions, how easy are they to fit please. Thank you

Blue Star Coffee Replies:

Hi Andy, This one fits the Steel PID, it does not come with instructions. It should be as easy as removing the 2 side screws, and removing the lid. Unscrew the existing LED and replace it. Make sure the machine is turned off.

masayuki from Japan asks

賞味期限を知らせてください

Blue Star Coffee Replies:

Hi Masayuki, its sell-by date is 03/2026

Sue from United States asks

I have a first generation of francis francis x1 espresso machine. Since the spout for portafilter basket is missing, I’m thinking to get a new one. Does this fit on my old francis francis x1 portafilter basket? I appreciate your response. Thank you!

Blue Star Coffee Replies:

Hi Sue, It probably does - but I cannot confirm. It is 3/8" thread size.

Dos from United Kingdom asks

Hi, is this portafilter manifactured by Gaggia or is it another brand?

Blue Star Coffee Replies:

Hi Dos, This is a generic version and not the original - Made in Milan Italy and is excellent quality.

Magda from United States asks

Is this product suitable for 110V?

Blue Star Coffee Replies:

Hi Magda, It is 230V so is unsuitable for 110V zones.

Tiago from Portugal asks

Hi, Fit's Sanremo Cube?

Blue Star Coffee Replies:

Hi Tiago, It is not on our list, but the thread is 10mm - Check to ensure it fits.

Dimitri from Belgium asks

Hi, will it fit Gaggia Classic Pro?

Blue Star Coffee Replies:

Hi Dimitri, probably does - but not certain - try the 17mm

Geoff from United Kingdom asks

What shower screen fits this product? - there are no listed IMS competition shower screens for the Breville/Sage dual boiler machines. Does this product change the default 58mm size of the shower screen required?

Blue Star Coffee Replies:

Hi Geoff, We dont have IMS screens for this shower holder. The shower screen indent is 47.35mm. The Ci200 are to wide at 51mm for this shower holder. As this is the same width- 52mm as the original - it will fit the group the same.

Jerry from United States asks

1. How far above the basket does the funnel extend? 2. What material is it made of? 3. In which country is it manufactured?

Blue Star Coffee Replies:

Hi Jerry, It's 21.5mm in height, so approx 14mm above the basket. It's made in China from aluminium and iron magnets.

Daniel from Latvia asks

Hi there, could you please tell if this solenoid fits Sage BES875? https://www.bluestarcoffee.eu/en/SageBreville-Ceme-Solenoid-3-Way-588-230V/m-5076.aspx

Blue Star Coffee Replies:

Hi Daniel, It probably does fit - but not certain. Check the existing valve to be sure, If its 3 way and PVC fittings - then it should fit.

Aleksandar from Denmark asks

Will this fit Sage SES875? I honestly see why not, as it looks exactly the same like the one in my SES875, but still want to confirm before I order. Thanks a lot in advance, Alex

Blue Star Coffee Replies:

Hi Aleksandar it fits the Barista Express, so probably fits your model as well.

Simon from Sweden asks

When are you expecting to have these brass boiler back in stock? Would like to order one ASAP 😀

Blue Star Coffee Replies:

Hi Simon, we have 1 in stock - I have set a pre-order status (for 24 hours). It only includes the boiler.

Isaac from Switzerland asks

Hi, Is there any chance that you'll be able to get this spare part very soon? Kind regards, Isaac

Blue Star Coffee Replies:

Hi Isaac, ETA is approx 8 weeks from ascaso. Insert an email for a back-in-stock email.

Kasper from Denmark asks

Do you know if this would fit a Gaggia Espresso Evolution? To my knowledge this should fit, and they seem like the same size. Or do you have another basket or portafilter that fits?

Blue Star Coffee Replies:

Hi Kasper, It could fit, but check the dimensions of your basket to make sure. This is 25mm deep x 53mm Width (60mm inc rim)

mahdi from Iran asks

can we use this model for EC9???

Blue Star Coffee Replies:

Hi Mahdi, it fits EC 5, EC 6, EC 7, and EC9..to be sure measure your basket. This is Edge: 59 mm inc outside lip x Height: 40 mm x Inside: 49.5 mm

Christopher from Denmark asks

Is this compatible as a replacement for the "Americano valve" on the Sage Oracle Touch SES990?

Blue Star Coffee Replies:

Hi Christopher, Dont think that valve is in the Oracle - search for "Solenoid Valve 9000Bhs 230V" using our search bar. It controls the group water.

Gerald from Malta asks

Hi we repair coffee machine for our local client and we need to find the means of making Teflon tubes copper ands do you supply the copper and for a 4mm taflon pipe and the crimping tools if needed. Ps normally we by these but with sage machine we can't due to metal plate that one needs to put the pipes in before the copper and thank you for you halpe Gerald should you need to contact me use whattup on 99595931 thanks agian

Blue Star Coffee Replies:

Hi Gerald , we don't have these pipes - we can only get limited parts for Breville/ Sage. We have the push fittings that last longer than the PVC fittings.

Daniels from Latvia asks

Hi, the 3-way solenoid comes with no o-ring. Barista Express 3-way solenoid has a black o-ring which seems slightly different from red o-rings. So for everyone wondering make sure to keep an old one or contact bluestarcoffee to be certain red one fits

Blue Star Coffee Replies:

Hi Daniels, Our red gasket is made from silicon and fits this valve see below.

Jacob Valdemar from Denmark asks

When will it be back in stock? I'll buy one asap!

Blue Star Coffee Replies:

Hi Jacob, We are expecting very limited stock end of March 25 approx.

Sue from United States asks

Hi there! I just received the portafilter spout safely and perfectly worked on my old Francis Francis x1 first generation. Thank you very much!

Blue Star Coffee Replies:

Hi Sue, Thanks for the confirmation.

Marcos from Spain asks

Good morning. I have a La Cimbali Domus Classic coffee machine and I would like to know if this filter holder is compatible with it and why (I know that the product description says it is not compatible) but I am interested in knowing why. Do you have any filter holders that are compatible with this coffee machine model? Thank you very much.

Blue Star Coffee Replies:

The fins on this one are 5.5mm thick - the Classic uses thicker fins as far as I can tell. Width including fins: 81mm, Width without fins: 70mm, Fins: 5.5mm

Monique from Australia asks

Why is this not reccomended for finer grinds?

Blue Star Coffee Replies:

Hi Monique, the motor is not strong enough for espresso size - it would stop if grinds were too fine.

Steffen from Norway asks

How is the quality of the included basket on this one?

Blue Star Coffee Replies:

Hi Steffen, It is a standard SS stock basket. The "IMS Competition Delonghi basket" is a much better basket.

Will Pearson from United Kingdom asks

Can you kindly provide the measurement in millimetres between the poles that descend into the element. Also, does this come with rubber gaskets and nuts. If not, do you also have listings for these? If not, what is the diameter of the thread? Many thanks. Will

Blue Star Coffee Replies:

Hi Will, it comes with the nuts. Width: ø 55 mm | Thread: 1/4" - see related items for the o rings.

Kiki from United States asks

Does this fit Francis Francis X1 Anniversary (ESE & Ground)? If not, do you have one that does? Thanks!

Blue Star Coffee Replies:

It will fit illy Francis Francis: X-series with brass boiler (2nd/3rd generation - It wont fit Trio, Iperespresso or pod-only versions, X1 - Aluminium boiler 1st Gen: Classic (1999 - early 2004)

Ofek from Israel asks

Hello, I wanted to know whether this basket size h24 would fit in a bottomless portafilter that you sell for Gaggia

Blue Star Coffee Replies:

Hi Ofek, yes it fits Gaggia portafilters, however, you may get a better fit with the 68mm IMS baskets. Insert "ims competition 68 filter basket" into our search bar.

Dosyo from United Kingdom asks

Can magnet funnel stick to the basket? I heard that some ims are not magnetic.

Blue Star Coffee Replies:

Hi Dosyo, we tested the magnetic Rhinowear, our generic funnel and even the worm funnel with 8 magnets. They do not stick to this basket.

Sebastian from Romania asks

Hello, When this kit will be back in stock?

Blue Star Coffee Replies:

ascaso kits are discontinued - however, the parts can be purchased separately.

Keiland from United States asks

Will this be back in stock ?

Blue Star Coffee Replies:

Hi Keiland, unfortunately - this kit is discontinued - but you can purchase the parts separately.See the links for the parts in the kit description.

Fatmir from United Kingdom asks

Hi we need on black colour and how long for delivery

Blue Star Coffee Replies:

Hi Fatmir, Estimated shipping to UK is 1 week approx.

Kevin from Canada asks

Will this work for my Breville Oracle? If not, do you have one that will work on my Oracle portafilter?

Blue Star Coffee Replies:

Hi Kevin , We can not say for sure, if your thread is 3/8" then it will fit your portafilter.

Keiland from United States asks

Will this ever be back in stock?

Blue Star Coffee Replies:

Hi Keiland, this is due back end of March 25

Colin from United States asks

What are the specifications for the machine screen? It doesn't look like the equivalent part from Ascaso (https://ascaso-usa.com/products/i304-shower-screw?_pos=1&_psq=i.304&_ss=e&_v=1.0) is the same length as the one that comes in the kit. I already have the screen and brew head adapter, but not the screw itself.

Blue Star Coffee Replies:

Hi Colin, The ascaso i.278 shower is 52mm wide. The i.304 screw for this kit is M4 x 20mm longer than the short versatile screw . Search our site for i.304

Virgil from France asks

Hi, I puchased a quickmill Vibration Pump pulsor for my Victoria Lelit and have a question about the installation. My machine as an OPV adjustment and a selfstarting pump valve. Should I put the vibration pump between those element or after the POV adjustment valve? My machine as an OPV adjustment and a selfstarting pump valve. Should I put the vibration pump between those element or after the POV adjustment valve?

Blue Star Coffee Replies:

Good question ! Probably insert the OPV 1st, on the pump an then install the pulsar after the OPV. That way real pressure is adjusted 1st and vibrations smoothed after.

George from Sweden asks

What's the actual pressure range? Description says 0-16 bar, while on the pictures it's 0-12 bar

Blue Star Coffee Replies:

Hi George, well spotted it only goes to 12 bars. Using out search bar - insert "blue star coffee portafilter pressure gauge" - the small gauge goes to 16 bars.

Lee from United States asks

Hi, will the 17mm fit a Breville Barista Mini?

Blue Star Coffee Replies:

Hi Lee, I cannot say - but if the portafilter is 58mm, then it's possible.

Simon from United Kingdom asks

Will this fit a pump on a Jura Ena 5, and do you also supply the onrings and seals required for it? Thanks

Blue Star Coffee Replies:

Hi Simon. If you already have one, then yes, it will replace the existing one. See related products for o rings and clips.

MOTO from Japan asks

I would like to purchase 10 of this product. When will it be delivered? It will be shipped to Japan. Thank you for your reply.

Blue Star Coffee Replies:

Hi Moto, we will have in 2 weeks. I have set it for preorder.

Brian from France asks

Hi. Is this suitable for a 1998 EuroProfessional? Thanks in advance, Brian

Blue Star Coffee Replies:

Hi Brian. if you already have a pressure switch, then it should be the same. Check the technical details to make sure.

Brian from United Kingdom asks

Do you know when you’ll have these 41mm tampers back in stock, please?

Blue Star Coffee Replies:

Hi Brian, Yes, it is due back by the end of 03/25

Minjae from United Kingdom asks

Will it fit Decent de1xl espresso machine?

Blue Star Coffee Replies:

Hi Minjae, No, this will not fit Decent models - they use IMS ci200

Ollie from United Kingdom asks

Hi - would the 51mm version work with any 51mm Delonghi machine (eg stilosa / EC260)? Thanks

Blue Star Coffee Replies:

Hi Ollie, Yes, 51mm will fit the Delonghi stilosa.

Philipp from Austria asks

Which o-rings exactly will I need to use with this?

Blue Star Coffee Replies:

Hi Philipp. You would need the boiler and steam arm gaskets - product links are on this page.

Martin from Czech Republic asks

Hello, is it possible to use this portafilter with La Marzocco (triple) basket F.3.026.01: https://www.bluestarcoffee.eu/en/La-Marzocco-OEM-Double-Filter-Basket/m-6102.aspx - 21g? Thanks & kind regards, Martin

Blue Star Coffee Replies:

Hi Martin, Yes - The body is deep enough for H28 triple baskets.

Steefan Flückiger from Switzerland asks

Guten Tag fallen bei Lieferungen in die Schweiz Zollgebühren an? Besten Dank gruss Stefan Flückiger

Blue Star Coffee Replies:

You can import Fr63.00 (Inc shipping) VAT free to Switzerland. See https://www.post.ch/en/business-solutions/exports-imports-and-customs-clearance/imports/faqs-about-imports-customs-and-vat

Yagnesh from United Kingdom asks

Hi, will this portafilter take/change to IMS competition baskets?

Blue Star Coffee Replies:

Hi Yagnesh, Yes it will accept IMS baskets and BaristaPro, VST or E&B fit also.

ido from Israel asks

Is this the exact same like la marzoco single basket 26H just in 28H? if so will it fit 8-8 grams with 41m tamper like the 26H one?

Blue Star Coffee Replies:

Hi Ido, The cone will fit 7-gram maximum with a 41mm tamper. It is different to the other Marzocco single baskets. The cone is 12mm x 41.5mm

Andrea from Belgium asks

Hi, any chances this item will be back on stock soon?

Blue Star Coffee Replies:

Hi Andrea, This has been discontinued by our supplier. We cannot get 155°C thermostat at present.

Des from Ireland asks

I am looking for a 58mm coffee basket for my new sage oracle jet for 18/20 gems of coffee Priduct code des985 Regards Des watchorne

Blue Star Coffee Replies:

Hi Des, lick on this link for IMS baskets that fit Oracle - https://www.bluestarcoffee.eu/en/Portafilter-baskets/c-98.aspx?AttributeValueIDs=86

Dominic from United Kingdom asks

Will you be doing any white units?

Blue Star Coffee Replies:

Hi Dominic, yes - in March 25

Vitor from Portugal asks

Hi, Is it possible to add/change to a shorter spout?

Blue Star Coffee Replies:

Hi Vitor, The spout is glued - but probably can be removed by using boiling water to melt the glue.

Shane from Australia asks

Hi, do you stock the brass kit?

Blue Star Coffee Replies:

Hi Shane, Afraid not - maybe in future.

Peter from Ireland asks

Just wondering if this pump will fit Rocket Apartamento? Thank you!

Blue Star Coffee Replies:

Hi Peter, Search using our search bar for "Rocket Pump EX5 230V" . Check your existing pump to make sure its EX5.

Martin from Macedonia asks

Hi Do you ship to Macedonia and what will the shipping cost be?? Than you

Blue Star Coffee Replies:

Yes, we ship to Macedonia - approx 20€

Michael from United States asks

Does this reduce static on espresso grinds and control coffee into the portafilter

Blue Star Coffee Replies:

Hi Michael, it is designed to reduce the clumps that form when grinding.

Emi from Romania asks

Hello, In the description is mentioned Breville Barista Max as matching. Can you please confirm if so. I have a breville Barista Mini which is identical with Barista Max on the shower screen section. Thanks

Blue Star Coffee Replies:

Hi Emi, I cannot confirm if it fits or not - measure your shower to be sure - this one is 51.5 mm

Filip from Croatia asks

Hi! Is this gasket ok to use with Profitec Pro 400 (not a lever machine)? Thank you!

Blue Star Coffee Replies:

H Filip, this is just for lever models - you would need the E61 gaskets - search for "e61 gasket " using our search bar. 8mm for models under 3 years and 8.5mm for 4 years and over.

Jean from France asks

Hello, may I replace it by the Brass steel shower holder i.2698? I have a ascaso versitle made in 2013 with Thermoblock.

Blue Star Coffee Replies:

Hi Jean, If you have the thermoblock shown in the description or search using our search bar for "Thermoblock 230V". If you have this thermoblock it will fit - if you have the older thermoblock - it will not fit. The older shower holder has been discontinued by ascaso.

janos from Hungary asks

Hi there. Is this compatible with rancilio silvia pump mount? Thank you!

Blue Star Coffee Replies:

Hi Janos, Yes it fits Silvia models - but check your mount just in case.

Tom from United States asks

Does this portafilter have a straight wall right to the bottom, or does it have a slightly curved exit at the base of the wall?

Blue Star Coffee Replies:

Hi Tom, There is a very sight ridge at the base of the body - juts out 1mm. It holds our stock 28mm basket and has 4mm to spare for a deeper basket.

Andrew from United States asks

Hi, I just wanted to confirm that this gasket will fit the Francis Francis X1 first generation espresso machine with aluminum boiler. The same product number on the Illy website says it only fits brass boiler machines (same at cerinicoffee.com). My old gasket measures rougly 66 mm outer diameter, 53 mm inner diameter, and 4 mm thick. If you have the gasket for the first gen X1 aluminum boiler machine, I will buy some immediately! Thank you

Blue Star Coffee Replies:

Hi Andrew, It seems that this gasket will be 4mm to wide for your model, as it is 70 x 53 x 4 mm. Could be trimmed..?

Evan from Spain asks

What is the diameter of the lid and the inner dimension of the bellows. I am trying to figure out if it will fit my Lelit Fred.

Blue Star Coffee Replies:

Hi Evan, It will not fit Lelit Fred - the bellows are 2cm too narrow for Fred hopper and the Eureka hopper is 1cm too wide for Lelit Fred.

Andreas from Switzerland asks

Hello, will it fit a Quickmill Carola Evo?

Blue Star Coffee Replies:

Hi Andreas, I cannot if it will fit or not, but it is an E61 model so the 18mm version might fit it.

Yovko from Bulgaria asks

Is it 510g or 436g? Both are writen in the specs :)

Blue Star Coffee Replies:

Hi Yovko, it weighs 510g.

Stanton from South Africa asks

Hello, Do you deliver to South Africa?

Blue Star Coffee Replies:

Hi Stanton, yes we ship to South Africa - insert an item into the basket for a quick quote, and more shipping options at checkout.

Kensuke from Japan asks

We are currently out of stock, is it possible to pre-order this item?

Blue Star Coffee Replies:

Hi Kensuke, Due back next week and is available for preorder.

Kensuke from Japan asks

Does this fit the Quick Mill Anita 0990 group?

Blue Star Coffee Replies:

No, It's not suitable - Insert "Rocket E61 Group Service Kit" into our search bar for Quickmill E61 models.

Ido from Israel asks

This portafiler match to fit Ims and la marzocco single baskets (7-9 grams)?

Blue Star Coffee Replies:

Hi Ido, using our search bar search for "ims competition 68 filter basket" at 68mm it is a better fit than the Marzocco for most Gaggia groups.

Tomasz from Poland asks

Is this for 41 or 58 mm tamper?

Blue Star Coffee Replies:

Hi Tomasz, this takes up to 58.5mm tampers.You could use a 41mm but it would only hold 7g or less - use 58mm and you can go to 12 grams.

Justin from United States asks

Hello, I have a La Pavoni Professional that was built in April of 1999 that I am currently rebuilding. It did not come with a portafilter. Do you happen to know if this particular one would work for my machine? Thank you so much, Justin

Blue Star Coffee Replies:

Hi Juston, Models made 2000 and after had a 54mm group and came with (search for) "La Pavoni Piston Sleeve" Older models did not have this insulating sleeve and the group was 52mm.

Kensuke from Japan asks

We are currently out of stock, is it possible to pre-order this item?

Blue Star Coffee Replies:

Hi Kensuke, We may not have stock before Christmas and we don't have a dispatch date yet from factory yet. The best estimate is 1 week in January - you will receive a back-in-stock email.

john from Greece asks

what do we mean 600 kilos service? by whom?

Blue Star Coffee Replies:

Hi John, you should replace the burrs after 600kg, otherwise it will take a little longer to grind the same weight.

Robert from Germany asks

Jsut wondering, what about the Gaggia Coffee from 86 (The white model with the steam knob on the front), a chance that it will fit the boiler? Thanks

Blue Star Coffee Replies:

Hi Robert, If it has an aluminium boiler, then the brass should fit.

John from Greece asks

Any black friday offer?

Blue Star Coffee Replies:

Hi John, sign up to our newsletter we will have offers out next week.

aleef from Malaysia asks

will this fit gaggia classic pro with ims ga200

Blue Star Coffee Replies:

Hi Aleef, No. This shower screen holder will not fit the IMS shower screen, as the IMS shower screen has an indent, and as a result, water will come out of the sides of the shower screen. You need "Classic Shower Holder IMS"

Odz from United States asks

What's inside the box if I available this item?

Blue Star Coffee Replies:

Hi Odz, Manual Coffee Grinder Body. Handle & Lid Assembly. Amber Glass coffee grounds Jar. Clear Polymer coffee grounds Jar. Lid for Grounds Jar. User Instruction Manual

Luan from United Kingdom asks

Hello, what size gasket would i need for the conti cc102 please?

Blue Star Coffee Replies:

Hi Luan, It probably does fit the CC102, as it fits the CC101. Our generic is 8.5mm or 9mm and the original is 8.3mm, so if the machine is less than 2/3 years old- it could be a little tight

John from Greece asks

Fits on our elektriciry cipliers in greece ? Suko 3 out 220 voltage?

Blue Star Coffee Replies:

Hi John, This grinder is 230V and comes with a 13amp 3-pin plug - You can choose a 3-pin plug + EU adaptor.

Sophia from United States asks

Hi, I wanted to double check that the filter basket can be removed? Is it compatible with the single shot basket that came with my gaggia original portafilter?

Blue Star Coffee Replies:

Hi Sophia, Yes the basket can be removed, it comes with a 14/16g basket held with a basket clip. It will fit a single 58mm basket also. Use the existing basket to remove this basket by wedging it off.

Lauro from Mexico asks

Does it it a Sanremo Treviso?

Blue Star Coffee Replies:

Hi Lauro, I cannot be certain - but it probably does fit Sanremo Treviso, as the mushroom size for Sanremo MILANO LX, TORINO, VERONA.

Tim from United Kingdom asks

Hi, I’m new to the La Pavoni Europiccola. I bought an almost new one on eBay. I have used other peoples. I’m guessing I need new gaskets/seals as when I lift the lever the water pours through the portafilter and no pressure when you pull down on the leaver. Do you think this gasket kit is what I need. Big thanks. Tim

Blue Star Coffee Replies:

Hi Tim, Probably group gasket or piston gasket is the issue - We have all the group gaskets in the best-selling standard kit - insert " Pavoni Group Service Kit " into our search bar.

Assen from Bulgaria asks

Hello, is this product different from the other OPV spring set for Gaggia Classic that you also sell on your website, and which of them should I choose for my Gaggia Classic E24? Thank you.

Blue Star Coffee Replies:

Hi Assen, They are the same springs - so no difference as far as I can tell.We have sold many of both and both are good.

Wendi from United Kingdom asks

Hiya, will this fit the Micra?

Blue Star Coffee Replies:

Hi Wendi, probably does fit - the Micra is 6.5mm while this is 6 1/8mm in thickness. You may need a Paper Shim Gasket 72mm to make it thicker.

Ido from United Kingdom asks

Will it fit a gaggia portafilter?

Blue Star Coffee Replies:

Hi Ido, this is 70mm wide and Gaggia is 68mm, so while it will fit the portafilter it may get stuck in the group - depending on the model. Search using our search bar for "ims 68" - for a better-fitting basket. or copy paste https://www.bluestarcoffee.eu/en/IMS-Competition-68-Filter-Basket/m-3424.aspx

Imran from United Kingdom asks

Would this kit work for a Victoria Arduino Neuvo Simonelli mythos one plus grinder. I think it’s the same spec as the Eureka method one plus? If so I’ll buy it

Blue Star Coffee Replies:

Hi Imran, The mignon hopper base is 41.7mm wide x 17mm deep. Compare that with your hopper base. We don't have the Mythos dimensions. The bean trap will be an issue, even if the base funnels are the same.

Artūras from Lithuania asks

Hi, maybe you have steam wand which fits bezzera hobby and is similar to this one, because on old hobby there is very uncomfortable one. Thank you.

Blue Star Coffee Replies:

Hi Artūras, This will not fit Hobby,that model uses a wand with 2 o rings , to make the seal - this would leak. We don't have that steam wand.

Wim from Netherlands asks

Fit these on the Gaggia Classic Evo pro (2024)

Blue Star Coffee Replies:

Hi Wim, It will fit into the portafilter, but I cannot say if it will suit the Evo - probably does , but cannot be certain. For more information - search our search bar for - Universal Single Pod Portafilter Basket 58mm ESE

Giwrgos from Greece asks

Hello, does this fit in the ascaso bar one? Thank you!

Blue Star Coffee Replies:

Hi Giwrgos, Yes Fits ascaso bar models.

Henrik from Denmark asks

Does this also fit the Mechanika Max?

Blue Star Coffee Replies:

Hi Henrick, Suits Mechanika models in use for more than 1 year, otherwise for new machines Pf sits at 6:30 instead of 6:00 (The original fin thickness for ECM is 5.5mm and this generic one is 5.8mm)

Mary from Ireland asks

Is this the same as the gold bag Agust Oro ?

Blue Star Coffee Replies:

Hi Mary, Yes this is the exact same blend as Agust Oro - it has been rebranded to 'Pura Vita Giotta'. Same full-bodied coffee with loads of coffee creme.

Michael from United Kingdom asks

Is this compatible with FLOWMETER 1/4 WITH WIRE 9.0.24.05G

Blue Star Coffee Replies:

Hi Micheal, Yes - same Gicar code 1/4" wired.

Wayne from Australia asks

Hello, Are these the correct screws for my Mazzer Mini e coffee grinder burrs? The grinder uses the 64mm 189D burrs. Thank you

Blue Star Coffee Replies:

HI Wayne, Search in our search bar for " #5698 " - for Mazzer flat cylinder head M4 x 8mm and keep the blade firm.

Mary from United Kingdom asks

Which disc is better for my Breville express ? Hole or no hole ? Thanks.

Blue Star Coffee Replies:

Hi Mary, The disc with a hole uses cleaning tablets to backflush the group and when the tablet melts it cleans both the filter basket and portafilter. The disc with no hole can be used with both tablets or powder - but will only back flush.

Rita from Switzerland asks

Is the tamper self-leveling? Many dynamometric tampers have the problem, that the tamper-achse with the spring can move a little bit inside the handle, so there ist 2-3° skew tamping.

Blue Star Coffee Replies:

Hi Rita, When you press the handle down the level disc prevents it from going further - once the tamper base touches the portafilter it cannot be skewed. Therefore you get a level tamp. See " #3366 " with a thick base for skew-free tamping.

MOTOO from Japan asks

Is this product heat-resistant tempered glass?

Blue Star Coffee Replies:

Hi Motoo, although it is used for hot drinks - It is not tempered glass. It can take temp up to 96°C.

MOTOO from Japan asks

Is this product heat-resistant tempered glass?

Blue Star Coffee Replies:

Hi Motoo, although it is used for hot drinks - It is not tempered glass. It can take temp up to 96°C.

Nguyen from Vietnam asks

Hello there! Happy and returning customer here. Good thing I held out on the Coffee Sensor flow control device, that now I am offered a cheaper and seemingly better choice. Just a small question: your product page says "Options: Upgrade to walnut knob - see below." However I didn't see any button to add the walnut knob in the same page. Is it the same Coffee Sensor walnut knob (ID: 2431) sold separately, or Blue Star Coffee will eventually add a self-branded knob? Best regards, -Nguyen from Vietnam

Blue Star Coffee Replies:

Hi Nguyen, The walnut knob is E61 Walnut Lever Round Handle M8 Brass - we have added a link now on the page.

Ella from Ireland asks

Will this fit SES878SST4GEU1 sage barista pro

Blue Star Coffee Replies:

Hi Ella, should fit as it fits Sage Barista Pro BES878.

David from United Kingdom asks

Hello - My machine is Gaggia Classic 2015 RI9403/18. Which ims shower screen will fit? Thanks, David

Blue Star Coffee Replies:

Hi David, - Gaggia classic V2 with non-removable shower screen holder and steel boiler uses this one Ci200IM. - Gaggia Classic pre-2015 - you will need an IMS kit or IMS shower holder below. (The pro has an indent preventing the IMS shower from sitting flat).

Apostolos from Greece asks

i am looking for a bottomless portafilter suitable for a gran gaggia prestige (54mm)

Blue Star Coffee Replies:

HI Apostolos, We don't have a bottomless PF suitable for Gran Gaggia models. They are not made as that model was designed for pressurized portafilters and extract at a higher pump pressure as a result. You will need to get a new coffee machine if you want to use a bottomless portafilter.

Plamen from United States asks

Hi there, wanted to ask what the inside depths of the two portafilters are: Lelit PLA58 Walnut Naked Portafilter and Quickmill Naked Portafilter Walnut E61

Blue Star Coffee Replies:

Hi Plamen, The quick mill is deeper at 28mm - comes with 21g basket and the Lelit is 25.5mm - comes with a 14/16g La marzocco style basket.

Joao from United Kingdom asks

1/8 is bsp or npt

Blue Star Coffee Replies:

Hi Joao, these are BSP British Standard Pipe thread - all our fittings are BSP unless stated otherwise.

Giannis from Greece asks

Hi, Is the 16/18 basket suitable for 18 grams of coffee,or is gonna be hard to place all of it inside?Is the 18/20 the better choice for me if I want to use 18 grams of coffee?

Blue Star Coffee Replies:

Hi Giannis, The quantity of coffee that fits into the basket is approximate and depends on how fine the grind is and the type of coffee used. The 16/18g H26 Double will probably fit 18g - measure the height of the existing basket to be sure - this one is 26mm in height.

Laurence from United Kingdom asks

Hi will this fit a gaggia classic 2006 model?

Blue Star Coffee Replies:

Hi Laurence, This will not fit a 2006 classic, you would need the DeLonghi or Gaggia steam wands. This uses a female nut, the Gaggia uses a male fitting.

Athena from Hong Kong asks

May I please check if this product can be shipped to HK? And whether there’s instruction / advice how I can replace the switch myself?

Blue Star Coffee Replies:

Hi Athena, Yes we ship to HK. There is no instructions - Simply swop the contact spades from old switch and insert into the same position on the new switch.

Ilya from Ireland asks

Will this fit on Rancilio Silvia? Planning to use conical m5x12 screw with it to achieve flat shower screen

Blue Star Coffee Replies:

Hi Iiya, SI200IM is designed to fit Nuova Simonelli - RA200IM will fit Rancilio models - search #3420

Travis from United States asks

Hi, Will this fit a 2006 Ascaso Dream HL7? Travis

Blue Star Coffee Replies:

Hi Travis, Yes this will fit Dream 57mm models. It won't fit 58mm dream versions: Dream PID or Dream one

Joshua from Taiwan Province of China asks

If I put it into the boiled water(100 degree C) and set the desired temperature to 60 degree C, will it beep when the boiled water cooling down to the set temperature(60 degree C)?

Blue Star Coffee Replies:

Hi Joshua, You can set the desired temperature by using the top left button - see the video for more info. The thermometer will beep when it has reached the programmed temperature.

Lee from United Kingdom asks

I’m looking to repair the end of some Teflon tubing from my Sage espresso machine. Will this attachment fit on the end of the Sage Oracle steam boiler to coffee boiler cable with the nun compression fitting? I have a picture of this would help.

Blue Star Coffee Replies:

Hi Lee, Sorry for the delay. This is the Ulka pump fitting for 4/6mm Teflon pipes - and is 1/8'' thread. I don't know what fittings the sage uses - but it would be close. I suggest that you measure your pipe - if you can. Regards Gerald Technical services.

Torsten from Germany asks

Will it work on my Bezzera BZ Group? I use the Bezzera Duo DE equipped with an IMS Shower Screennand would love to use this tool.. Thank you in advance for your answers. Torsten

Blue Star Coffee Replies:

Hi Torsten, Yes this should fit fine - as long as the screw is - flat and not Philips + type.

Anton from Sweden asks

Does this have a silicone gasket on the end?

Blue Star Coffee Replies:

Hi Anton, yes it comes with a clear silicon gasket and 2 clear silicon o rings.

Alex from Israel asks

What I need for Lelit Anita made 2020 ?

Blue Star Coffee Replies:

Hi Alex, No this will not fit the new Lelit models - you would need the 7.7mm Lelit Silicone gasket 8700018, we don't have this new thicker gasket.

Erin from United States asks

Is there a triple shot basket for la pavoni ?

Blue Star Coffee Replies:

Hi Erin, The IMS Pavoni has a deeper basket - B602th Height 29mm - 4 mm taller than this stock basket. Check that your portafilter will accept deeper basket.

Sudhir from United Kingdom asks

Hi there I saw your list of compatible machines and ascaso is listed however not compatible with PID, does this include the steel duo? Cheers thanks

Blue Star Coffee Replies:

Hi Sudhir, It does fit Dream PID, Steel PID Uno Duo Trio, Bar, Barista, Barista T - Height is 17mm - so should fit the same as the existing shower screen.

Eli from United States asks

Will it fit an Expobar office lever?

Blue Star Coffee Replies:

The fins on this PF are a little too thick for that model- this is a better fit Expobar Creme Portafilter Walnut.

Sean from Australia asks

Hi folks - I bought the Gaggia Naked Portafilter Walnut - but within a few weeks the handle started to spin. Is there a way to tighten it? It’s almost unusable currently. Thanks

Blue Star Coffee Replies:

Hi Sean, The handles on these are not glued, as some people prefer to swap handles. If it is still loose after tightening the handle, add PFTE tape or sellotape to the thread, which will prevent it from moving. Let us know if this does not work for you.

Lasse from Denmark asks

Will my original Lelit Mara baskets fit this portafilter?

Blue Star Coffee Replies:

Hi Lasse, Yes, your existing basket should fit.

TA from Czech Republic asks

Hello, when will this tip be back in stock? Thank you.

Blue Star Coffee Replies:

Hi TA, Due back Mid-June 23.

Andrew from Croatia asks

Hello, is this shower holder suitable with original shower screen from Gaggia Classic 2019? I would like to change Gaggia classic shower holder on my 2019 Gaggia classic which is made from aluminium. Best regards, Andrew

Blue Star Coffee Replies:

Hi Andrew, Yes it will fit - It replaces the aluminum shower holder.

Paul from Luxembourg asks

Hi, I have a Lapavoni post millenium, does the it fit the standard portafilter of laPavoni ? thanks

Blue Star Coffee Replies:

Hi Paul, Yes the 51mm puck screen fits La Pavoni lever machines made 2000 and after | Europiccola, Grande Bellezza, Professional, Romantica, Stradivari

Arash from Canada asks

Hi, Will you ship to Canada, Vancouver? If you does, What is the shipping fee?

Blue Star Coffee Replies:

Hi Arash, Canada tracked shipping is approx CA$8.00 - delivered by Canada Post.

Paulo from United Kingdom asks

Hi is this a reconciliation valve or new also what warranty does it come with Thank you

Blue Star Coffee Replies:

Hi Paulo, This is a new valve. All parts are covered by our 1-year warranty.

Dieter from Belgium asks

A paper shim is pictured, is it included with the bundle?

Blue Star Coffee Replies:

Hi Dieter, Yes it comes with a paper shim - which will make the gasket thicker, which is ideal for older machines.

Allen from United Kingdom asks

I would like this item but will ideally need a gold M12 nut for it (for my La P Prof Post Mill?)

Blue Star Coffee Replies:

Hi Allen, Unfortunately, we do not have the gold M12 nut and we cannot get it.

James from Ireland asks

Can this be used to descaler a gaggia berrea machine as I see the normal one is discontinued Thanks

Blue Star Coffee Replies:

Hi James, Yes - this is suitable for Gaggia & Saeco machines. It contains the same ingredient - citric acid.

Artur from Ireland asks

I was wondering if this part will fit Gaggia Classic RI8161/40? It is a 2012 model. Thank you!

Blue Star Coffee Replies:

Hi Artur, Yes it fits your model as well.

Anu from Switzerland asks

Dear Blue star coffee, I've recently received this Quickmill pulsor and tried to assemble it. The pulsor seems to screw in too deep or misses about 15mm of clearance in the Ulka pump's neck. I have tried with both EX5 and EP5. Both times the Quickmill pulsor broke the pump valve piece on the inside and the pump valve gets stuck. Are you perhaps familiar with the clearance issue and know how I could solve it? Thank you!

Blue Star Coffee Replies:

Hi Anu, The thread is too long and does not go all the way into the EX5/EP5. You will need to use PTFE tape to make the seal. Regards, Gerald, Technical Dept.

Mark Gormley from Ireland asks

What is the difference between the Motta leveler and this palm tamper?

Blue Star Coffee Replies:

The leveler is used to distribute the grounds and iron out pockets of air - tamping alone will not do this. This palm tamper rests on the portafilter edge, so you cannot get an uneven tamp.

Raul from Spain asks

Hello, I was wondering if the IMS basket will fit in this portafilter - 29 mm height

Blue Star Coffee Replies:

This portafilter is tapered at the base - so it will not take the deep H29 IMS basket.

Laurent from France asks

Hello ! May you indicate me if the two copper pipes are included with the manometer ? Thank you.

Blue Star Coffee Replies:

Hi Laurent, This ascaso gauge does not include the copper pipes. It has 2 brass thread inlets at the back of the gauge which attaches to the copper pipes.

Gerald from Sweden asks

Can you use this to remove the screen inside my coffee group? I have a Rocket Giotto.

Blue Star Coffee Replies:

Hi, Yes - this is ideal for removing the E61 shower screen - Insert the crowbar upside down and wedge the shower screen-free.

John from United Kingdom asks

Can you remove the handle ?

Blue Star Coffee Replies:

Yes - The handle is not glued. Both handle and removable screw can be removed.

Tom from Canada asks

Will this damage my aluminium boiler ?

Blue Star Coffee Replies:

This acid is made from citric which is fine to use on aluminium, so long as contact time is limited to max 25 min.

Kostas from Greece asks

Will this basket take 18g?

Blue Star Coffee Replies:

This can take up to 18g - 19g at a push.Depends on the grind settings and coffee used.

Demitris from Greece asks

Does the 41 tamper fit ?

Blue Star Coffee Replies:

The 41mm tamper does not go fully into the conic chamber, like the Marzocco filter basket. Better to use the 58.5mm tamper.

Trevor Smithe from United States asks

What is the difference between this and the ascaso double basket?

Blue Star Coffee Replies:

The ascaso basket i.280 is 1mm taller, so slightly more capicity and has more holes with smaller perforations than IMS = more crema and dryer puck.

Toby Kingston from United Kingdom asks

Will this fit my leilt anna ?

Blue Star Coffee Replies:

This will fit all Lelit models: 57mm & 58mm inc Lelit Anna.

Horst Schlagg from Netherlands asks

What is the difference between this Dream and the old Dream ?

Blue Star Coffee Replies:

The older version had a 57mm portafilter - this uses a 58mm commercial size. It uses a thermoblock for endless steam and the boiler does not wear out or needs replacement gaskets. Also uses a commercial steam wand and a pump pressure gauge.

Shelia from Australia asks

I have a water pipe made from polished aluminium for tea on my machine - is it ok to use this to remove the lime buildup ?

Blue Star Coffee Replies:

No - If you immerse the aluminium in any acid - it will tarnish and go grey. Use window cleaner to clean polished aluminium.

Gerry from Ireland asks

What is the difference between this stock basket and the IMS or ascaso baskets ?

Blue Star Coffee Replies:

The stock basket is 24mm in height - ascaso 23mm, IMS is 22mm However ascaso can take almost 18 grams and IMS 12/14 and 14/16g ascaso has more holes with smaller perforations than IMS or stock basket. = more crema and dryer puck.

Eugene from Poland asks

What is the weight of this portafilter?

Blue Star Coffee Replies:

Hi Eugene, the weight of the Gaggia PF is 376 grams - shipping weight may be more depending on the packaging.

Stelios from Greece asks

Hello! Would this fit for BFC Junior Plus, as an e61 group model also?

Blue Star Coffee Replies:

Hi Stelios, It may fit the BFC, as the generic ones do - check your height to make sure, If it is 80mm top to base - then it should fit. See below or search #5396 for the generic version.

PETROS from Greece asks

Hi, is this the 2022 version?

Blue Star Coffee Replies:

Hi Petros, This was made in September 2023 - so is up to date.

Rom from Israel asks

what size is the provided Silicon tube?

Blue Star Coffee Replies:

Hi Rom, it's 50cm x 4x7mm. Insert "Silicon Water Inlet hose tube" into our search bar for more info.

Kevin from Denmark asks

What is the measurement for the nozzle thread?

Blue Star Coffee Replies:

Hi Kevin, the thread is 3/8''

Leonid from United States asks

I want the white scale version. Also I am worried that the adjustment is not smooth. Can you please comment on this?

Blue Star Coffee Replies:

Hi Lenoid, This comes with the coffee sensor black gauge as standard. The adjustment should be smooth as the inside the FC, is a pin that is moved by turning the lever - see customer reviews for more info.

Rita from Switzerland asks

Sorry for my questions, but could you please make a video, how to use it exactly? How can I put the collar on the basket if the level disc stands out so far? There is a big distance between the collar and the level disc, that’swhy the level disc presses the coffee ground before the collar reaches the basket.

Blue Star Coffee Replies:

Hi Rita, When you press the tamper down - the tamper base will lower down to the basket and the level disc sits on the basket - the tamper cannot be skewed. A level tamp will ensure a total extraction.

Michele from Switzerland asks

Hello, I see that your kit is compatible for the Lelit Mara X (according to your list) but you answer to James from Iceland is that it will probably not fit ?? So, is it ok with Lelit Mara X ?

Blue Star Coffee Replies:

Hi Michele, It should fit - we had no feedback at the time, but I understand that it does fit the Mara X.

Ask Question Show all Questions & Answers in your language

Our Best Selling Gaggia Products

Loading ...

Gaggia Naked Portafilter Walnut

€41.99 RRP €47.00 Save 11%

Gaggia Olab Boiler Solenoid 230V

€54.99 RRP €70.00 Save 21%

Gaggia Boiler aluminium

€49.99 RRP €66.00 Save 24%

Gaggia Classic Steam Valve

€34.99 RRP €52.00 Save 33%

Gaggia Naked Portafilter

€32.99 RRP €41.50 Save 21%

Gaggia IMS Steel Shower Kit

€47.99 RRP €64.00 Save 25%

Gaggia Boiler brass

€174.49 RRP €210.00 Save 17%

Gaggia Classic Naked Portafilter

€35.99 RRP €40.00 Save 10%

Gaggia Silicon Gasket x 2

€8.99 RRP €14.00 Save 36%

Gaggia IMS Steel Shower Kit Nanotech

€54.99 RRP €70.00 Save 21%

Gaggia Portafilter Walnut Double Spout

€39.99 RRP €45.00 Save 11%

Gaggia Classic Portafilter Double

€32.99

Gaggia Group Service Kit

€10.99 RRP €13.00 Save 15%

Gaggia Classic Pressurized Portafilter Double

€34.99 RRP €39.00 Save 10%

Gaggia Classic Shower Holder IMS Original

€31.99 RRP €43.00 Save 26%

Gaggia Portafilter Pressure Test Gauge

€39.99 RRP €48.00 Save 17%

Gaggia Steam Knob

€16.99 RRP €19.00 Save 11%

Gaggia Ulka Vibration Pump 230V EX5

€23.99 RRP €30.00 Save 20%

Gaggia Classic Brewgroup brass

€144.99 RRP €167.00 Save 13%

Gaggia Classic Shower Holder IMS

€25.99 RRP €30.00 Save 13%

All Brands

Parts by Brand

Bottomless Portafilters

E61 parts

Register a Business

VAT FAQs

Gaggia Classic Portafilter Component €0.00