This is the original 4mm silicon group gasket for Anna, Anita, Diana and Roma Lelit 57mm models made before 03/2015
You will need to change your gaskets every 1-2 years.
You should also keep a spare under the tray for when you need to replace the gasket.
Why buy?
When the coffee starts to overflow from the handle when making a coffee.
You won't have the correct pressure to extract the coffee, leaving a diluted watery taste in the coffee.
💡 Replace before the gasket has hardened, otherwise it is harder to remove. No later than 2 years!
Specifications:
Size:Ø 71.5 x 54 x 4 mm
Lelit UPC MC047SIL
Material: Silicon
Fits:
Lelit Anna PL041, PL41, PL41QE, PL41TQE, & PL41TEM
Lelit Anita PL42 E, EM, LEM, QE, TEM,
Lelit Dianna PL60
Lelit Roma PL50
Lelit Silvina PL61
BFC Azzurra
La Pavoni Boundi, Boundi Lusso, Puccino, Puccino Lusso
La Pavoni Domus Bar, Domus Casa, Puccino, Napolitana
Possibly fits but not confirmed - measure your existing gasket
La Forza F22
Lelit (Mokita) Combi - PL042
Won't fit:
New 57mm models that use a 7.7 mm gasket (Lelit 8700018) 71mm x 54mm x 7.7mm - However if you use 2 gaskets one on top of the other it will fit - suits older machines as it will be 8mm and not 7.7mm.
Easy to replace - all you need is patience and an awl or a sharp screwdriver.
Remove the shower screen by unscrewing the main screw.
Remove the old gasket: Use an awl to remove the gasket or a sharp screwdriver - it will come away in pieces as it will be brittle.
Insert silicon gasket - 💡 although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
Screw back the shower screen.
Changing the group gasket every year will make this job relatively easy to do.
When to replace: When the coffee starts to overflow from the handle when making coffee. You won't have the correct pressure to extract the coffee, leaving a diluted watery taste in the coffee.
There are 2 reviews with an average rating of 5.00