Sage/Breville Ceme Solenoid 2 Way 558 230V  €24.99

Simple to replace:

Removal:

• Remove  the 3 electrical connectors on the solenoid
• Remove the silicon tube from the top of the valve.
• Remove the PTFE clip with plyers, and pull out the pipe, on each side of the valve.
• Keep the  PTFE clips so you can reuse them.

Installation: 

• Insert the new o rings onto the PFTE pipe, on each side of the valve.
• 💡Take note of your existing valve position - by taking an image of the existing solenoid.
• 💡 Pay particular attention to the no1 position and the no. 2 position on the valve. Make sure position no. 1 is in the same position after you are done. The valve is one-way and must be in the correct position - otherwise, you will have to reverse it. 
• Push the PFTE pipe right into the valve and lock it with the old clips - push back in by hand.
• Insert the silicon tube back into the valve
• Insert the wires back into the solenoid.

• When finished if the circuit is not working probably the solenoid valve needs reversing.

Fits models: