Sage/Breville Group Gasket Duel 58mm  €5.99

1. Press the POWER button to switch the machine off and unplug the cord from the power outlet.
2. Carefully remove the water tank and drip tray, taking particular care if they are full.
3. Using a skewer or similar, clean the centre of the screw of any residual coffee.
4. Insert the shorter end of the Allen Key into the centre of the screw. Turn counter-clockwise to loosen the screw.
5. Once loosened, carefully remove and retain the screw and stainless steel shower screen. Make note of the side of the shower screen that is facing downwards. This will make re-assembly easier. Soak the shower screen in warm water and Puly Urnex or Cafetts detergent - rince thoroughly.
6. Remove the silicone seal with your fingers or a awl. Insert the new seal, flat side first, so the ribbed side is facing you.
7. Re-insert the shower screen, then the screw. With your fingers, turn the screw clockwise for 2-3 revolutions then insert the Allen Key to tighten until the screw is flush with the shower screen. 8. Re-insert the drip tray and water tank

When to replace:

When the coffee starts to over flow from handle, when making a coffee. You won't have the correct pressure to extract the coffee, leaving a diluted watery taste in the coffee.

💡 WARNING Do not immerse power cord, power plug or appliance in water or any other liquid.