Details:
This is a set of 2 group gaskets and includes a paper shim gasket in case the portafilter slides over to the right - For silicon versions - see below.
Choose 8mm for new machines and 8.5mm for machines 3 years or older.
If you notice that there's water leaking from the area above the portafilter, known as the group head, then your gasket is probably to blame. When changed your coffee cream will improve as you will have achieved the maximum extraction pressure of 9 bars. (The pressure will be constant as the filter basket has a full seal.)
Gasket change
- Commercial replace every 6 months,
- Home replace every 12 months
The longer you leave it the more difficult it will be to remove them. The group seals become brittle over time due to heat from the portafilter and with age. When removing the old one it will probably fall apart as it will be so brittle. We recommend that you always keep spare gaskets.
- Size:(Ø 73mm x 57mm x 8.5mm) Models older than 3 years
- Size:(Ø 73mm x 57mm x 8mm) Models less than 2/3 years
Type: Flat
Material: Rubber
UPC: IS000411
Galway, Ireland
