Rocket Walnut Handle Set  €69.99

Fits 7mm x 7mm valves such as:

• Rocket: R58, R60, Appartamento, Cromometero R/V,  Giotto  Mozzafiato Evoluzione R/V.  💡see note below.
• Expobar Office: (Not confirmed - they use the same fittings. 7 mm square steam dial and 8mm E61 lever knob).
• Models with 7 mm square steam/water knobs and 8mm E61 knob and 12mm portafilter handles - Returnable if it does not fit.

Won't fit:

• Rocket models with screw-on tap   👉Giotto steam knob
• Faema - they use 10mm e61 knobs 
• La Pavoni - - they use 10mm e61 knobs 
• La San Marco -  - they use 10mm e61 knobs 
• Astoria  - they use 6x6mm square dial knobs  👉 Walnut E61 Steam Tap Knob 6 X 6
• Cimbali - they use 6x6mm square dial knobs  👉 Walnut E61 Steam Tap Knob 6 X 6
• Wega    - they use 6x6mm square dial knobs. 👉 Walnut E61 Steam Tap Knob 6 X 6

• 💡Some models made before 2017 used a narrower steam tap: (6.5mm x 6.5mm square dial knobs)
•  Rocket R58/R60, Appartamento  Giotto  Mozzafiato. If yours measures 7mm x 7mm - then this kit will fit.

How to fit:

• Remove the black PVC Steam knob: Unscrew the chrome cap anti-clockwise and unscrew the steam tap nut or pop-out clip. Replace with walnut knob and screw in new chrome cap or old rocket one. There are 2 holes in the cap to help tighten the cap into place. 
• Remove PVC handle: Check that this is possible as some handles are glued**   and as a result are difficult to remove.
• Remove the lever knob: 

** If your existing portafilter handle is glued:

• It might be possible to remove the handle by immersing the portafilter into a bowl of boiling water - leave the handle sticking up so it is not damaged.
• Leave it for 10 min.,
• Wrap a towel around the portafilter and try loosening the handle.