Details:
This is a set of generic gaskets for models with the E61 group - also available in silicon.
You need to change your group gaskets as part of regular maintenance.
The group gasket seals the portafilter to the group and prevents coffee from escaping during its 9 bars of extraction. As the gaskets age, they go hard and pressure is lost as the coffee will escape from the side of the group.
When do I change the group gaskets?
- You should change your group gaskets every 6 months in a commercial environment and 12 months in a home setting.
- If group gaskets are not changed promptly - you will lose the 9 bars extraction pressure needed to get a good crema, as the gasket has gone hard and coffee will leak from the group.
- The gaskets will be very difficult to remove, as the rubber goes hard - change at the correct intervals and you will save time and improve quality.
We recommend that you always keep spare gaskets.
Type: Flat
Material:
- Rubber: NBR 85SH FDA (Peroxide cured nitrile polymer for food applications) - FDA-approved
- Silicone: 80SH SILICONE FDA Food Safe Silicone - FDA-approved
Options:
- 2 x Rubber gaskets + paper shim gasket.( In case your group is worn and PF sits over to the left - adding the supplementary Paper Shim Gasket will position the PF at 6 o clock)
- 1 x Silicon gasket
- Size:(Ø 73mm x 57mm x 8 mm)
- Size:(Ø 73mm x 57mm x 8.5mm) Models older than 3 years
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
