How to fit:
- This hose is 14mm inside so may be a little tight for some waste outlets.
- Best to insert the tip of the hose into boiling water for 1-2 min and expand with a plier
- Insert pliers to widen the opening and then twist onto the waste connection while the hose is still hot and pliable.
- Fix the hose in place with a cable tie or hose clips / Jubilee Clip.
💡You may have to cut the end of the hose if the end of the hose touches the water level. - The wastewater will not drain - if the hose is permanently touching the water in the waste pipe you will have water all over the counter.
💡Top tip: This is gravity-fed, so it's important when fitting this hose, that it does not go over the electrical cable or water inlet - it should go under it those cables. You should always test it after fitting it with boiling water - pour 1/2 liter of boiling water into the water waste box, and check for leaks and speed of drainage - the hot water will soften the pipe allowing the pipe to flatten and form its permanent shape.