1/5
  • Select image
Parker YB09 Group Solenoid 230V

Parker YB09 Group Solenoid 230V

Add to WishList
Stock Notifications
See All Coffee Solenoid | See All Parker Products
Order in the next2Hours43minutes14secondsfor dispatch today
Postage to Ireland on this item is €5.50
FAST Shipping to Ireland

Parker Lucifer 3-way Solenoid Valve with 230v YB09 coil


Details:
Typically found on the group head of a commercial coffee machine and home machines.

This solenoid valve includes the longer-lasting ruby viton seal pad in the valve- better for hard water areas. The cheaper versions have a rubber pad and don't last as long. Comes with the coil and valve ready assembled.

You may need to replace your solenoid valve and coil if:

  1. No water is coming from the group
  2. Water is constantly dripping from the group or from the solenoid base
  3. Valve burned out - This is rare - more likely that the valve is blocked or worn.

It is not always necessary to replace the whole solenoid, a quick solution is just to replace the valve. See below

Take care when replacing the valve - make sure the holes align with the holes on the group - otherwise, no water will come from the group.

Specifications:

  • Type: 3-way valve
  • Electrical: 9W 220/230V 50/60HZ
  • Brand: Parker
  • Coil: YB09 See YB09 Solenoid Coil 230V
  • Valve: VE128IR - drain ø 1/8" conical - max 20 bar See Group Solenoid Body Ruby Pin
  • Size hole: RUBY seal - orifice ø 1.3 mm
  • Fluid temperature: -30°C+140°C

 

Search terms:

Parker YB09 Group Solenoid 230V, 393134J, VE128IR, fracino solenoid FC125-16, Quality ECM expobar VBM solenoid valve

How to replace a solenoid valve on a coffee group:

  1. Make sure you have turned off the water connection before you remove these valves, otherwise, water will spurt out of the group.
  2. Remove the 4 hexagonal nuts with an Allen key - make sure you have the correct Allen key otherwise, you may damage the nut.
  3. Insert the Allen key into the hexagonal nut and tap anti-clockwise with a spanner - this will break the seal caused by a mineral build-up. 
  4. When replacing make sure that the hole of the solenoid is correctly aligned with the hole in the coffee group, otherwise, you won't get any water from the group. Also make sure the o rings are present on the base of the body, as they can slip off during transport.
  5. If you have to replace it while the machine is still warm - be careful as hot water will pour from the group - better to do it while it cold.
  6. Refit the coil and check the body for leaks.
  7. 💡If screws were hard to take off - then you should replace them with new screws, as next time they may not come off if they are damaged. see solenoid screw hex M4X10. 

Fits models:

  • Expobar/Creme: G-10, Markus, Monroc, New elegance, Mega crem, Diamant * 💡 See note below
  • ECM: Laura, Veneziano, Elektronika, Barista
  • Fracino: Bambino, Classic, Contempo, Churb, Heavenly PN# FC125-16 ** 💡 See note below
  • Vibiemme: CHIMAERA, CUBO, DOMOBAR-SUPER, DOSAPLUS, EVOLUTION, KOMETA, LOLLO, MERCURY, MINIMAX, REPLICA, REVOLUTION, SILVER
  • Quality Espresso:
  • Futurmat Ariete: Ariete-rimini, Ottima, 

💡**Older Fracino models are earthed (3 wires) - This is unearthed - this is not a problem as the electrovalve is earthed through the chassis.

       *Expobar use spade connectors - this will still fit - but you will have to reuse existing connectors.

 

Review this Product
Be the first to review this product
Parker YB09 Group Solenoid 230V

Got a question about this product? We'll do our best to get you the information you need, simply click below.
Parker YB09 Group Solenoid 230V

Related Products

Our Best Selling Parker Coffee Solenoid

Our Best Selling Coffee Solenoid

Also Bought

Our Best Selling Parker Products