Details:
100% *Italian walnut with M12 thread - see fits tab.
Before you buy:
Measure your own portafilter thread in case you have a different size, as there are wider M12 size as well.
Check that you can remove your existing handle, as some come glued** and are very hard to remove.
💡If the portafilter handle is glued:
It might be possible to remove the handle by immersing the portafilter in a bowl of boiling water - leave the handle sticking up so it is not damaged.
Leave it for 10 min.,
Wrap a towel around the portafilter and try loosening the handle.
💡Italian walnut:
- The grain and colour of the wood may be different from the image shown.
- It may not match the wood of your existing machine.
- Walnut is a natural product, colour and grain vary according to the wood used.
Fits:
Most commercial portafilters with M12 thread - - see won't fit models
ascaso models with M12 thread such as Dream PID , Steel PID, Steel Professional
Brasilia
Bezzera
Expobar
ECM
Quickmill
Rocket
Rancilio
Lelit
Profitec
Wega
Will not fit M10 handles : - See below
Any portafilter with a 10 mm thread such as;
Ascaso (57mm versions) Dream Basic Arc Steel (Fits Ascaso home machines, however - it will not be flush to the portafilter handle)
Faema
Gaggia
Carimali
Cimbali
Corte Dalla
Casidio
Dalla Corte
Izzo
Marzocco
Nouva Simonelli
Reneka
Vibiemme
La San Marco
** If the portafilter handle is glued:
It might be possible to remove the handle by immersing the portafilter into a bowl of boiling water - leave the handle sticking up so it not damaged.
Leave it for 10 min.,
Wrap a towel around the portafilter and try loosening the handle.
| The BSC Advent Calendar | 12 Days, 12 Discounts | 
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
