Details:
This is not the original Fracino sight glass but will fit the same. This includes the o rings needed to keep the seal.
Care must be taken when tightening the nuts in order not to damage the glass.
Dimensions:
Diameter: 11mm O/D X 8mm I/D
Length: 140mm
Fits Fracino models such as :
Fracino Classic
Fracino Contempo
Fracino Bambino
Includes:
1 x sight glass
2 x top and bottom rubber or rings
Vat is included in the price
FRACINO PN: FC181
How to fit: These are loose guide lines only: We accept no risk and work is done at your own risk.
Boiler must be drained before you attempt to remove sight glass - the boiler drain nut is at the base of the sight glass - (care must be taken removing this nut as you can damage the glass)
After draining the boiler - Remove damaged sight glass - ensuring that no glass remains inside.
Screw lower steel nut to form a seal
Fill boiler with water and keep an eye on the steel nut - if leak tighten slightly until there ins no leak.
Insert black rubber O rings go into stainless steel sight glass holder 1st
Then add brass o ring - (not included)
Then add the stainless steel screw
Insert glass sight glass into top part while have inserted the lower steel screw into the glass.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
