Bezzera Group Gasket Round 8mm OEM  £5.84

Details:

This is an original Bezzera filter holder group gasket.

This round version is for models made from Jan 2014* and after. It is softer and makes locking the portafilter much easier, seems loose at 6 o'clock but is tight. -  Models made before  20015 use the conic gasket see BZ Conic Group Gasket OEM

You need to change your group gaskets as part of regular maintenance.

The group gasket seals the portafilter to the group and prevents coffee from escaping during its 9 bars of extraction. As the gaskets age, they go hard and pressure is lost as the coffee will escape from the side of the group.

When do I change the group gaskets?

• You should change your group gaskets every 6 months in a commercial environment and 12 months in a home setting.
• If group gaskets are not changed promptly - you will lose the 9 bars extraction pressure needed to get a good crema, as the gasket has gone hard and coffee will leak from the group.
• The gaskets will be very difficult to remove, as the rubber goes hard - change at the correct intervals and you will save time and improve quality.

            We recommend that you always keep spare gaskets.
 

Size:  Ø 66 x 56 x 8 mm

Type: Round
Material: Rubber peroxide - 90SH

Manufacturer: Bezzera
Bezzera code:7496092

💡Check the label behind the drip tray for Manu date.

Bezzera has 3 group o ring gaskets: (Check your group 1st )

1. Round gasket Produced after 2014 (This one)
2. Conic gasket  Produced before 2014 click here - Still fits 01/14+ models.
3. 5.3mm,  6mm  old models