This is a high-quality, generic naked portafilter - made in Milan Italy - designed for Lelit 57mm versions 2 years or older.
Made from chrome coated, solid brass for maximum heat stability and includes a 14-16g basket. Not an original manufacturer's part but will fit your machine and perform the same way.
Naked portafilters help you to extract the best shot possible. It helps to control and diagnose the extraction of espresso shots and assures a pure espresso with a great crema.
It's an amazing espresso accessory for training, as it exposes channelling. Channelling occurs when coffee grounds are not evenly distributed or properly compressed.
Includes:
Stock stainless steel filter basket 14g 💡 Not a precision basket - see accessories below for Ascaso or IMS
Filter basket spring: This holds the basket tight in place, so the basket won't fall out when you use the knock box.
Chrome-plated, brass portafilter
PVC handle
Specifications:
Width including fins: 72.4mm
Width without fins: 64mm
Depth: Depth inside portafilter 29mm - If using a triple basket, it should be no deeper than 29mm, as the portafilter is tapered at the base.
Francis Francis: Trio, Iperespresso or pod-only versions
💡**For models less than 2 years - the fins will be a little thick at 6mm.
If fins are too thick, PF will sit at 7 o'clock instead of 6 o'clock. Older models will have a little wear, on the brass group head - so they would fit at 6 or 7 o clock.
Check your portafilter fins to see if they are 6mm, if they are then this will fit your model.
A possible solution for new machines made after 2021 - replace the group gasket - it will have more give and allow a better seal.
There are 6 reviews with an average rating of 4.83
hello, Today I received the product that I ordered from you. it arrived and it is perfect .a small note, when I did the order it was written that if I fill in my details for the first time and place an order from you the product will come with a gift and it did not arrived only the product came
Hi Idan, It will not fit a new Anita PL042TEMD very well. The fins on this generic PF are a little thick at 6mm - PF will sit at 7 o clock instead of 6 o clock. It suits older models better.
SantiagofromChileasks
Hi, do you think it will fit a Nemox - Dell'Opera ? (2017). I'm using an Ascaso Competition Fileter 14Gr H23 on the stock pf, if that helps.
Blue Star Coffee Replies:
Hi Santiago, It might fit - they are very similar. Measure the fins to make sure. This one is: Width including fins: 72.4mm x Width without fins: 64mm
Fins: 6mm deep x 22mm wide
DrorfromIsraelasks
Hi hello, I want to know if this part fits my machine which is PL042TEMDAUS thank you
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
