This is a 3-way solenoid valve from Olab - 9000 series for Lelit ane more.
Regular machine descaling will prevent this from getting blocked.
You may need this part if:
- No water is coming from the group - the solenoid valve could be blocked with lime or debris.
- Water is constantly dripping from the group when steaming the milk.
- If the machine is not descaled every 3-4 months
Replacing the valve: - Allow 15-30 min
Make sure that the machine is plugged out 1st
You will need Teflon tape and spanners to replace this.
- Remove silicon tube and ss nut
- Slide off the electro valve - (Take note of where the wires go if removing the wires)
- Remove both nuts holding the elbow fittings.
- Finally, remove the old solenoid valve.
- Remove the elbow fittings from the old valve
- Insert new elbow fittings with Teflon tape
- Put everything back and check for leaks
When fitting this solenoid valve - take note of the arrow - it should be pointing away from the boiler. See your old one, if you reverse the valve my mistake - it won't work and you will have redo it.
(This is almost the same as the other Ascaso solenoid i.1057 except the outlet pipe is slightly narrower.)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
