Sage/Breville Olab solenoid 2 way 240V  €29.99

Fits models:

• Breville Sage solis Barista express BES870,BES870XL
• Breville Sage solis Barista Pro BES878
• Breville Sage solis Barista Pro BES880

Will not fit: Models with plastic base - see below.

• Breville Sage solis Barista Pro BES878, BES880
• Breville Sage solis Barista express BES870, BES870XL

Installation: 

• 1st remove the existing solenoid valve.
• Then remove the 2 x 1/8" fittings and rub with a wire brush to remove the thread locker. Keep aside as you will need to reuse these or see here for fittings
• 💡Take note of your existing valve position - by taking an image of the existing solenoid.
• 💡 Pay particular attention to the no1 position and the no. 2 position on the valve. Make sure position no. 1 is in the same position after you are done. The valve is one-way and must be in the correct position - otherwise, you will have to reverse it. 
• You will need to use PTFE plumbers tape to make this seal - see PTFE Sealing Tape or below . Wrap once around each 1/8" fitting.

• When finished if the circuit is not working probably the solenoid valve needs reversing.